ZOSI IPC Manual de usuario

PROFESSIONAL SECURITY MADE EASY

Quick Start Guide

For more information of your new system, please refer to www.zositech.com

Z18.5.T.1

IPC Quick Start Guide --- 1

Zosi Smart App store Google play

1. Camera Overview

2. Mounting Camera

To receive the wifi signal

See wider angle

up to 65ft (20m)

Micro SD(Max 64GB)

Durable weatherproof

Wi-Fi antenna

3.6mm lens

24pcs, 5mm LEDs

SD Card Slot

Reset Button

RJ45 Port

Power Port (DC12V/1A)

IP66 Metal Housing

2.1 Camera Connection Diagram

WiFi Camera

Router

Your smart device

Power adapter

Mounting surface

Drywall anchors (4)

Mounting screws (4×)

Camera base

Adjustment screw

2.3 To install your camera

1. Use the included mounting

template to mark holes for the

screws. Drill holes for the mounting

screws.

NOTE: Insert the included drywall

anchors if you are installing the

camera in drywall.

2. Connect cables as shown in the

section “Connecting the Camera”

3. Feed the cable through the

mounting surface or cable notch

and mount the camera stand to the

surface using the provided screws.

4. Use a spanner (included) to loosen

the adjustment screw.

5. Adjust the camera position as

demand.

6. Tighten the adjustment screw to

secure the position.

2.2 Before Installing the Camera

A. Light Sensor and IR LEDs

B. Adjustment Screw

C. Camera Base

• Decide whether to run the cables

through the wall / ceiling (drilling

required) or along the wall / ceiling.

• If you run the cables along the

wall / ceiling, you must run the

cable through the cable notch on

the base. This will keep the camera

base fasten to the surface when

mounted.

For initial setup, connect the camera to the LAN port of the router by an Ethernet cable.

Then follow the steps below.

Make sure your camera and smart device are connected to the same router.

Cable Notch

ATTENTION

This camera includes an Auto

Mechanical IR Cut Filter.When the

camera changes between Day/Night

viewing modes, an audible clicking noise

may be heard from the camera.This

clicking is normal, and indicates that the

camera filter is working.

3. Personal Account Registration

The following instructions are for the Android APP; instructions for the iOS version are

slightly different.

• Start and install the mobile app “Zosi Smart”, which can be downloaded by scanning the

QR Code shown on the front page of this manual ).

• Click “Register now” at the bottom of the interface to register your APP account.

• Enter your e-mail address to get validation code. Click “Next” to set the account password

and complete the registration process.

Note: Please login your email before registration in case you miss the validation code.

4. Add device(At the first time)

A. Power the device and wait for 20 seconds to proceed with next step

B. Use a RJ45 cable connect the device to the WI-FI router, the WI-FI router is the same

with your smart phone.

C. Connect your smart phone to the WI-FI network of your router

D. Open zosi smart APP, and select the APP icon in the upper right corner, as shown in

the figure

F. Click the ' ' icon to scan the QR on the camera.

E. Click “ ✓” in the upper right corner to save the device adding

4.1 Wired Connection

Scan QR Code

It is default admin

You can set the

name for your

need

Save

Add

device

Note: if add the device unsuccessful, please hold the reset button on the camera to reset it,

and then reconnect from steps A to E above, until you can see the video on your phone

Pause for 5 seconds then you can hear crisp switch voice from the switcher inside the

camera, As show in the figure

A. Search the corresponding device shown on device list and enter the real-time preview;

B. Click the “ ” button in the upper right corner to enter device settings

C. Select “Wireless Settings” to proceed with the wireless configuration;

D. Select the WiFi network which has stable and strong signal and enter the WiFi password

accordingly;

E. Click “Confirm” to finish converting the wired connection to wireless connection.

4.2 Convert Wired Connection to Wireless Connection

5.1 App Information

5. App Function Introduction

My Information Device Setting

(1) Change Password: modify the login password of the app;

(2) Check for Updates: update your app to the latest version;

(3) Fingerprint Login: no need to enter password if fingerprint touch function is available in

your phone.

5.2 Device Information

(1) Share QR Code of the device;

(2) Video: click to start recording or stop recording;

(3) Screen Shot: click to start screen capture;

(4) Event Playback: click to view the motion detection video and other video stored by the

camera;

(5) SD/HD: adjust sharpness of the image;

(6) Intercom: two-way audio (applicable for device that supports this feature).

Device Information Video Preview

The PC Client (AVSS) is applied for DVR/NVR/IPC preview with features like real-time view,

device management, remote video playback and etc.

6. PC Client Remote Monitoring

6.1 Login

Double click the icon “AVSS” to stall the PC Client. Select the language and log in.

Note: Use the default user name and password, or enter the same login information as your

mobile App.

6.2 Device Management

6.2.1 Click “Device Management” to add areas and devices.

6.2.2 Add Area: Right click the blank to add area and enter the name.The Area Name is

used to describe the place being monitored.

6.2.3 Add Device: Right click the Area Name to add device and change type of the device.

Enter the device name, device ID, user name, device password and channel number, then

click “OK” to save.

6.3 Preview

Click preview to find device list, right click device to Play All and Stop All, preview video can

be displayed or stopped.

6.4 Playback

Click “PlayBack”; select device ID, channel number, date and then search to find the video.

Double click record time to set the exact time and click “Start Play”.

1. Why can't I add a device using local search?

A: Make sure that your device is in the same LAN as your phone. If you cannot make

both devices in the same LAN, manually enter the UID of your device to complete the

adding.

2. Why is the device disconnected?

A: Please check:

Is your device connected to the network?

Is the router working properly?

Do you enable the feature of automatically obtaining an IP address?

3. Why can't I find a video recording file?

A: Please check:

Is the SD card damaged?

Is the date of the search file valid?

Is the device system set at the correct time?

FAQ

Tabla de contenidos

Otros manuales de Cámara de seguridad de ZOSI

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario