ZOSI W4 Pro Manual de usuario

W4 Pro Wireless

Security Camera System

Quick Start Guide

ZOSI Technology Co., Ltd.

3/F, Taitan Industrial Park,

Xiangzhou District, Zhuhai, Guangdong 519000, China

Thanks for your purchase at ZOSI.

This quick start guide will guide you through the initial installation

and related settings. In addition to following this guide, please visit

(https://zositech.com/) for more installation videos, tips and detailed

information.

If you have any problems about our products, please visit our online

support center (https://www.zositech.com/support-center/) or contact us

before returning.

V2.U.09.Z

Contents

EN 01

What's in the Box

Quick Start Guide

Gallery & Specs

NOTE: NVR with hard drive support 24/7 recording.

2.1 Network Video Recorder

2.2 Camera

①VGA port: connect monitor with VGA port to NVR via VGA cable

②HDMI port: connect monitor with HDMI port to NVR via HDMI cable

③Backup USB port: insert USB drive for backup or system upgrade

④Ethernet port: connect router or switch to NVR via Ethernet cable

⑤Mouse USB port: connect to mouse

⑥Power port: connect to power supply

⑦Audio port: audio signal output

⑧Antenna: transmit wireless signal

①Lens: capture image and video

②Spotlights: illumination and light alarm

③IR-LEDs: provide night vision in dark

environment

④CDS: day and night auto switch

⑤Microphone: for voice intercom

⑥Speaker: for voice intercom and voice alarm

⑦Antenna: transmit wireless signal

⑧Warning light: It lights up when the camera is turned on. The warning light alarm can

be turned off on Siren-Light Alarm NVR interface.

①VGA port

②HDMI port ⑦Audio port

⑤Mouse USB port ⑥Power port

④Ethernet port

⑧Antenna

③Backup USB port

①Lens ⑦Antenna

⑤Microphone

④CDS

⑧Warning light

⑥Speaker

③IR-LEDs

②Spotlights*2

How to Connect the System

How the System Works

The wireless NVR system consists of two parts. One is the NVR connected to the monitor,

and the other is the IP cameras installed. Both NVR and IPC need independent power

supply to work. Users can watch the real-time video captured by each IPC on the monitor.

These images will also be saved in NVR for later playback at any time.

To ensure that the product can work normally, we recommend that you connect the whole

system before installation to see if there is any damage during transportation.

How to connect the system:

1. Connect NVR to router using a network cable.

2. Connect monitor to NVR via HDMI or VGA port(VGA cable is not included).

3. Connect the included USB mouse to the top USB port of NVR.

4. Connect NVR to power supply (12V power adapter)

5. After the system starts, connect camera to the system (maximum support 8

channels).

6. The monitor will display live video of the camera.

Camera Installation Steps

4. Adjust the angle

3. Install the camera

1. Mount the antenna 2. Insert wall plugs into

the holes

1. Adjust the camera antenna to keep it vertical to get the best reception.

2. Drill screw holes on the wall according to the mounting hole template, and insert the

rubber plugs into the holes.

3. Align the camera with the rubber plugs on the wall, and screw it into the rubber plugs.

4. Adjustthecameratoaproperangle.

Installation Tips

Hard Disk Installation

Please refer to the picture down below for the ideal installation.

It is recommended to place the camera at least 7 feet (2.1m) above the ground and tilted

slightly downward towards the monitoring area, excluding any high-traffic areas. (E.g.

sidewalks or roadways).

This product has a built-in hard drive. If you need to replace it, please choose a 3.5-inch

hard drive with a thickness of no more than 2cm.

NOTE: Please ignore it if you do not need to replace the hard disk for your video recorder.

1. Power off the video recorder and remove the sliding cover.

2. Insert the hard disk into the NVR, as shown in the figure.

3. Flip the NVR to the back and use a Phillips screwdriver to fix the hard disk.

4. Close the sliding cover of the NVR.

You need to format the hard drive before recording. Right click mouse > Main Menu > Hard

Disk Management > select Hard Disk > Format > Apply.

1. Ensure that the camera’s view is open and free of obstructions.

2. Place the camera at no more than 20 feet (6.1m) to ensure that the area you want to

monitor is within the field of view.

3. Install the camera within the receiving range of the recorder (refer to the camera

specifications).

4. The camera can be used outdoors (protection rating IP66).

Remote View Settings (App)

Remote View Settings (AVSS Client)

AVSS PC client can be applied to DVR/NVR/IPC monitoring, with functions such as live view,

device management, and remote video playback etc..

Make sure that the device has completed the network configuration before adding device on

PC client. Download and install the AVSS client, follow the steps below to start setup. Official

Download: https://www.zositech.com/app/.

Zosi Smart App (IOS/Android) App video operaon link

HDNetwork Video Recorder

HDD LAN POWER

HDNetwork Video Recorder

HDD LAN POWER

HDNetwork Video Recorder

HDD LAN POWER

HDNetwork Video Recorder

HDD LAN POWER

2TB

1 2

3 4

9.1 Login

9.2 Register

1. Click Register Now to enter

the registration page

2. Enter the unregistered account

and password to sign in

xxxxxxxxxxx

Install and open AVSS PC client, select the

language and click Login. Please register an

account first if you don’t have one. It is

recommended to log in with the account of

ZOSI Smart App, or choose local login (no

account and password is required)

9.3 Device Management

9.3.1 Click Add Device below the device list to add device information

9.3.2 Edit Device

Select device type: NVR/DVR/IPC, etc., enter the device name, device ID or instant identifier

ID (Drag the device QR code or sharing code into the QR Code Identification Zone), user

name, device password and channel amount, and then click Confirm to save the setup.

NOTE: The default user name is "admin", the default password of IPC is "admin", NVR/DVR

does not need to enter a password, the number of camera channels should be the number of

cameras, the default is 1.

Modify the device type, device name, device ID, channel number, login user name and

password, and save the modification.

Tabla de contenidos

Idiomas:

Otros manuales de Cámara de seguridad de ZOSI

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario