ZOSI ZS V17.5 Manual de usuario
For more information of your new system, please refer to www.zositech.com
ZS V17.5
NVR Quick Start Guide
2
1. Connecting your system
Camera
Antennas
interface
Router
Power
Monitor/TV Mouse
Within seconds, you should see the cameras’ image live view on the monitor.
Username: admin
Password: None (means empty, no need to input anything, just click login)
Tips:
To protect your privacy, please right click the mouse > Go to System Setup > System Admin > User > set password to change
your password.
Install the antennas for cameras and the NVR.
Connect the cameras to their power supplies (smaller 12V 1A power adapter).
Connect the NVR to Router with an Ethernet cable. IP Camera Video inputs: Just in case any of your cameras are out of
WiFi range, you can connect cameras to router with an Ethernet cable.
Connect a monitor to the NVR via its HDMI or VGA port (HDMI and VGA cables are not included).
Plug the mouse (included) into the USB port at the rear panel of NVR.You will then be able to operate the NVR with the
mouse.
Connect the NVR to its power supply (bigger 12V 2A power adapter).
45
6
3
3
1
2
4
5
6
Statement
Thank you for purchasing this product. ZOSI is committed to providing its customers with a high quality, reliable security
solution. ZOSI cannot assume responsibility for any consequences resulting from the use thereof.
Before Installation
This product may require cabling. It is strongly recommended that all products and components be tested prior to
installation.
Applications
The system is a standalone system. It will need to be connected to a monitor to start live view (Such as PC monitor, TV,etc)
By adding a 3.5" SATA hard drive to the NVR, you can record&playback recordings from the cameras.
By connecting the NVR to the Internet, you can view the cameras anywhere anytime.
Tips
These instructions are to assist your installation of the system and remote surveillance.For more instructions and details,
please contact us.
Tech Support
For products introduction& specifications, please visit www.zositech.com.
For FAQ and troubleshooting, please visit ZOSI Help center https://support.zositech.com
If you need customer support, email us and expect response within 24 hours: [email protected]
3
2. Camera Mounting Spots
3. Adjust the camera
4. Wired connection
Adjust to the position you want up or down.
The neck of the stand attached to the mounting base, rotate the stand
by loosening the radial joint locking ring. Once in position ,tighten the
ring again.
Tips:
1. If you want the camera to work wirelessly, use Match Code to add camera to NVR. See the section 6 in this manual about
Add camera by matching code.
2. If you want the camera to work wired, use Auto Add. This requires you hard wire the cameras to router to get it work.
If some of the cameras' mounting spots are out of WiFi range, you need to hard wire the cameras to the NVR to get images.
1
2
The neck of the stand attached to the mounting base, rotate the stand
If some of the cameras' mounting spots are out of WiFi range, you need to hard wire the cameras to the NVR to get images.
1
2
2.1 Mount the cameras anywhere within the Wi-Fi range, plug them to power with included power adapters (smaller ones are
for cameras).
2.2 The cameras should start to stream videos to NVR within 1 minute.
2.3 If it does not display video on your monitor, the distance maybe too long or there are too many obstacles. Please move
the cameras closer to the NVR.
4.1 Use standard Network cables to connect the cameras to the Router
4.2 After connecting the camera to the router,please right click the mouse > go to "Video Manage" > click "Refresh" > click
"Auto Add" .Then you will see the camera is added to the NVR and display video on the screen.
Router
Network cables Network cables
Camera
NVR
Step 1: Connect the NVR to the Internet
Connect the NVR’s WAN port to a LAN port of your router with an Ethernet cable. When the NVR is connected to the Internet,
within minutes you should see the Cloud ID and status shows "ONLINE" on the right bottom corner on your screen.(If the
Cloud ID is not displayed please go to System Setup and tick the Cloud ID icon)
Network Video Recorder
Network Video Recorder
Network Video Recorder
Network Video Recorder
Cloud ID:662023312 ONLINE
2. View on Smartphone
Tips:
If the status does not change to "ONLINE", please go to System Setup > Network Setup> enable the DHCP or manually
allocate an IP for the NVR. If it does not go ONLINE after these settings, please contact your network administrator for help.
(Ex.: port 80 may need to be opened on the router.)
4
Step 2: Download the App
Search "IP PRO" or "EseeCloud" in App store or Google Play. Or Scan the QR Code to download the App.
IP Pro App store Google play
Step 3: Run the App
A: Install the free App.
B:Tap Register and enter your User name, Password,Email to create a new account.
C: Login the App, Tap "+" icon on the upper right corner of the screen > Add device by ID.
D:Configure the following information
1
2
3
4
5
5
Network Video Recorder
Cloud ID:662023312 ONLINE
1. Cloud ID: This Cloud ID can be found at the bottom right corner of your monitor.
Or right click the mouse > go to System Setup > Network Setup > Scan the QR code.
2. Descriptions: Choose a name of your choice for your system
3. User Name: Enter the NVR’s User Name (default: admin)
4. Password: Enter the NVR’s Password (default: No password required, just leave blank)
5. Tap Submit.
E:Tap the channel number to connect the cameras, then you shall see the live view of the cameras
6
3. Playback on mobiles
In the IP pro/EseeCloud App,when viewing the cameras'live inmage, click Playback, you will enter the remote playback
menu. The App automatically playback camera 1,you can switch channels by choosing the CH.
Tips: Videos in playback are HD main streams, which require a very good transmission condition. Kindly suggest you
playback in LAN. Remote playback out of LAN may not 100% work due to connection & network condition. Fast forward &
backward buttons may not work due to big video stream. But you can move to a certain time point by using the time bar.
7
Step 1: Download EseeCloud.exe software from CD and install it on your computer.Or go to https://support.zositech.
com to download the PC Client Software – EseeCloud.exe
Step2.1: add device by Cloud ID
Go to Device management . Choose add device by Cloud ID
Cloud ID : same as Cloud ID
Username: Enter the NVR's User Name (default: admin)
Password: Enter the NVR's Password (default: No password required, just leave blank)
Note: same as the IP Pro/EseeCloud account Descriptions in smartphone
Channels: same as your NVR's channel
4. View on PC Client Software
After opening the EseeCloud software, User login interface will be popped up.Enter username, password and then click
"Login" to enter the EseelCoud operational interface. You may enable "Remember me/password" so that you don’t need to
enter the login password in future EseeCloud operation.
Attention:
The default user must be admin and no password is required for the current version of IP Pro/EseeCloud. To prevent
unauthorized party from accessing your device, or other undesirable consequences may caused, please make sure that your
login password is updated when in the first login.
8
Step2.2: Add device in local network
Step2.3: Image Preview
2.2.1 Please click on the button which located at right side of the "Device in same lan" then all the available devices within
the LAN will be listed out.
2.2.2 Please click the "Add" button to add the device and the added device will be shown up at the device list which located
at the right side. If you didn’t change the device's description, the added device will be shown up as IP address.
After adding the device successfully, click Live View to enter into the preview interface > choose any device in the list > click
the icon you could connect all the channels under the device > click the icon in channel detail. it will start or stop
all the view playing as below:
9
5.View on PC via IE
1. When your PC is located on the same LAN as the NVR (normally means they are connected to the same router).
Step1. Find the IP address and Web port # of your NVR (IP address can be found in System Setup > Network Setup).
Step2. Enter the NVR’s IP address in your IE browser in format http://youripaddress, for example: http://192.1.1.100 (If
the default WEB port 80 has been changed e.g. to 100, you will need to add the new port number when you input the
IP address in the browser, for example: http://192.168.1.100:100).
User Name: Enter the NVR's User Name (default: admin)
Password: Enter the NVR's Password (default: No password required, just leave blank.)
10
Step 3: If this is the first time that you use the program, then please download and run the WebClient.exe control and follow
the pop up message.
Cloud ID : The Cloud ID can be found at right bottom corner of your monitor.
User Name: Enter the NVR's User Name (default: admin)
Password: Enter the NVR’s Password (default: No password required, just leave blank)
① Click Tools > Internet Options > Security > Internet > Custom Level.
② Scroll down until you see ACTIVEX CONTROLS AND PLUG-INS.
(If you have Internet Explorer 9 or 11, change ALLOW ACTIVEX FILTERING to DISABLE. Other versions of IE will not have
this option.)
③ Change the follow ACTIVEX controls to PROMPT:
Download signed ACTIVEX controls
Download unsigned ACTIVEX controls
Initialize and script ACTIVEX controls not marked as safe for scripting
2. When your PC is not located on the same LAN as the NVR (For example: view your home cameras from your office
PC)
Step1. Open your Internet Explorer (IE) browser and visit: www.e-seenet.com
Step2. Input Cloud ID, Username and Password to login.
Step4: Please click OK, and exit the "Security Settings" Menu when you complete the settings.
Tabla de contenidos
Otros manuales de DVR de ZOSI
ZOSI
ZOSI HD POE Manual de usuario
ZOSI
ZOSI SD12 Manual de usuario
ZOSI
ZOSI H 264 Manual de usuario
ZOSI
ZOSI F92101400008070 Manual de usuario
ZOSI
ZOSI 8AL-2893W Manual de usuario
ZOSI
ZOSI H 264 Manual de usuario
ZOSI
ZOSI HD POE NVR Manual de instrucciones
ZOSI
ZOSI 8AL-3023WX Manual de usuario
ZOSI
ZOSI ZR08DP Guía del usuario
