ZOSI HD POE Manual de usuario
PROFESSIONAL SECURITY MADE EASY
HD POE NVR
For more information of your new system, please refer to www.zositech.com
Z18.8.T.2.4040000720
HD Network Video Surveillance Recorder
NVR Quick Start Guide --- 1
Manual de instalación --- 11
Installationsanleitung --- 21
Notice d'installation --- 31
Руководство по установке --- 41
1
Need Help?
Connecting your system
Visit us online for up-to-date software and complete instruction manuals.
Information in this document is subject to change without prior notice. As our products are subject to continuous improvement,
ZOSI Corporation and our subsidiaries reserve the right to modify product design, specifications and prices, without notice
and without incurring any obligation.
1.Visit support.zositech.com.
2. Search the model number of your product.
3. Click on your product in the search results.
4. Click on the Downloads tab.
1. Ethernet Extension Cable*
NOTE: It might take one minute or so for cameras to start up and transmit video to your NVR.
2. Recommended:Connect cameras to NVR.
3. Connect cameras to a PoE Switch* or Router* on your network. See “Adding cameras from the LAN” on reverse for more
details.
Left-click
mouse
Right-click
During split-screen display mode: Click an
individual channel to view it in full-screen.
Click again to return to the split-screen
display mode.
During live view:Right-click anywhere on
the screen to open the Quick Menu.
On navigation menus: Click to open a
specific menu.
Within system menus: Right-click to exit
menus.
Using the mouse
4 channel configuration shown as above. 8 channel NVR have the respective number of video inputs.
For camera compatibility information,welcome to visit support.zositech.com
*Not included/sold separately.
Monitor/TV*
(VGA/HDMI)
5
6
3
IP Camera*
Power Port
ON
Router* Mouse & USB
BACK UP
124
AA
B
B
2
1. Setting the Startup Wizard
1. In the startup wizard, please click the 'finish" button.
2.Set the POE NVR password. (The password should no less than 6 characters.Please do not use symbol, such as “.” or “,”
as password.)
3.Login your POE NVR with the password that you have set.
3
2. View on Smart phone
1. Click the right mouse button, and select IPC Channel Config
2. Click the search icon,the NVR will start to search the IPC which is in the same network segment with NVR.
Step 1 Connect the DVR to the Internet
Fibre Optic DSL Router
DVR/NVR
PC
RJ45 cable
WIFI or RJ45 Cable
A: How to connect DVR to LAN ?
Unplug the modem,and then connect router to NVR's Ethernet port.
DSL/CABLE
MODEM
DSL/CABLE
MODEM
DSL/CABLE
MODEM
DSL/CABLE
MODEM
ROUTER ROUTER
ROUTER
NVR
B: How to test your DVR's network ?
(1) Right click Mouse > Go to Main Menu > Setup > Network
(2) Tick 'Obtain IP address automatically'
(3) Click 'Test', if 'OK' is displayed, the DVR is connected to network successfully.
Note: Please ensure DHCP in your router is open.
4
3. Please add searched IPC to different channels of NVR.
Tips:
1. In default status, NVR will add IPC to NVR channel automatically, and IPC’s default segment is 192.168.138.X. NVR can not
match IPC automatically if you modify IPC to other segments.
2. Only if the NVR is set to be a fixed default IP address, can IPC be added automatically. After adding IPC successfully, tick
”Obtain an IP Address Automatically” in the Network page (Main menu-Setup-Network ), then try to connect the system to
mobile app.
ステップ3
Step 2 Download App
Search Zosi Smart in App store or Google Play. Or Scan the QR Code to download the App.
Step 3 Run the App
Zosi Smart App store Google play
A: Install the free Zosi Smart App.
B: Tap Register and input your mobile phone number to get validation code, click next to input email box, password, then save
it.
C: Log in the App and enter the main interface (My Device). Click “+” in the upper right corner where three different options of
device adding are available.
5
3. View on PC Client Software
Enter the Device ID or Scan QR Code.
Password: Enter the DVR’s Password
Device name: Create a name for your system as needed.
D: Click “DVR/NVR” and “Scan QR Code”
1
2
3
E: Back to the device list > Tap the device > Tap “+” to select the corresponding channel > Tap “Confirm” to start preview.
1 2 3 4
1
2
3
Download AVSS PC Client , install and start it as below picture.
6
Click the Devices Manage to add the device.
First, create a group.
Then, add device under the group.
Please pay attention to choose device type (DVR or IPC) when adding device.
There are two ways to add device.
One way is adding device by directly input UID number.
Another way is adding the local device by searching LAN on search bar.
7
The system may not include Hard Disk depending on the kit you selected.This system works with most 3.5" SATA
Hard Disk or 2.5" SATA Hard Disk.
1. Install a Hard Disk (if your system has preinstalled Hard Disk, please skip this step)
2. Record video
Right click mouse > Go to Main Menu > Setup > Record
You shall see the record settings for all channels. Change the record setting according to your preference and apply the
changes.
Note:
After installing a Hard Disk, you need to first format the Hard Disk before recording.
Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format > Apply.
①Unplug your DVR from power, unscrew and remove the top cover.
②Connect the SATA power and data cables from the DVR to the corresponding ports on your Hard Disk (as shown).
③Place the Hard Disk into the DVR. Any cable should cross up over the Hard Disk.
④Holding the Hard Disk and the DVR, gently turn it over and line up the holes on the Hard Disk with the holes on the DVR.
Using a Phillips screwdriver, screw the provided screws into the holes. Assemble the cover.
①
③
②
④
4. Record video
Click “ok” to complete device adding.
Click “PreView” on menu, and double click
the device you want to watch on list, the
image will show up.
REC
8
Get into system Main Menu > Search, system presents picture as following.
Select the channel Start playing
Search the video you want via time or Event, then play it.
Previous Record: Move to last recorded event
Next Record: Move to next recorded event
Fast Forward: video can be played at different speed, from 1/4 times to 16 times.
Rewind: Video play can be rewinded at 1 time, 8 times, 16 times and 32 times.
Screen Display Mode: Both single-screen and multi-screen are available.You can choose how many channels you want to
playback one time.Channel without records presents blank screen.
Previous Record Next Record
Rewind
Fast
Forward
Play/Pause
Next frame
Previous
frame Single-screen display
Multi-screen display
5. Playback video
9
Select Camera. Tick the Channel you want to record on motion detection.
Holding Time. Set recording time length after motion stops.
Trigger. Multi-channels can be set to record when detecting the motion by one of cameras.For example,when camera 1
detects motion,camera 2 and camera 3 can be triggered to record as well.
Area. It is allowed to set sensitivity area of camera viewing range.
Click STAR to make the whole viewing range as sensitivity area;
Click Trash Box to remove sensitivity area;
Click and drag mouse to draw or erase the sensitivity area.
Set motion Detection,DVR will record only when motion or movement is detected.
Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.
The system records when motion is detected by the camera. An icon is shown when motion is detected.
Click to save setting Click to exit
As Color and luminance is important for sensitivity, so it's necessary to adjust its value at specific conditions.The default
value is 4 while value range is from 1 to 8.
Right click mouse to show or hide control menu at screen bottom.
Test the setting by moving something or some one walk through grid area within camera viewing range. If DVR detects
movement within grid area, a yellow hunanoid figure would be presented in the screen. The grid could not cover flag, trees or
some other flow objects in the wind to avoid false alerts.
6. Motion Detection
Tabla de contenidos
Idiomas:
Otros manuales de DVR de ZOSI
ZOSI
ZOSI ZR08DP Guía del usuario
ZOSI
ZOSI 8AL-2893W Manual de usuario
ZOSI
ZOSI HD POE NVR Manual de instrucciones
ZOSI
ZOSI H 264 Manual de usuario
ZOSI
ZOSI H 264 Manual de usuario
ZOSI
ZOSI ZS V17.5 Manual de usuario
ZOSI
ZOSI SD12 Manual de usuario
ZOSI
ZOSI 8AL-3023WX Manual de usuario
ZOSI
ZOSI F92101400008070 Manual de usuario
