ZKTeco FA50 Manual de usuario

Installation Guide

FA50

Version: 1.0

Due to regular system upgrades and products, ZKTeco could not guarantee exact consistency between

the actual product and the written information in this manual.

- 1 -

Operation Instructions

1.

Figure 1-1

1. The device has two USB plugs, as shown in the below Figure 1-1.

Insert the USB cable "A" of FA50M into the USB port situated on the

host’s back, as shown in Figure 1-2.

Figure 1-2

- 2 -

2. Right-click on My Computer > Properties > Device Manager.

As shown in the figure below, if "Imaging devices" and "libusb-win32

Usb Devices" appear, users can continue using the same device. But

if "Imaging devices" and "libusb-win32 Usb Devices" did not appear,

it means that the device did not get connected appropriately.

Note: Generally, it is due to the insufficient power supply of the USB.

Just insert the USB cable "B" into the USB port of the host.

Figure 1-3

- 3 -

Steps to Run Demo for the First Time on Windows

2.

Double-click and open the "FA50 Demo" file, then click "FA50M

InstallDriver" to install the driver, as shown in Figure 2-1.

Driver Installation

Figure 2-1

- 4 -

On the Installation window, click "Next", as shown in Figure 2-2.

Figure 2-2

Then click "Finish" to successfully install the driver.

Figure 2-3

Demo Test Process

3.

1. Double-click and open the "FA50 Demo" file, and then open the

Demo Test software, as shown in Figure 3-1.

Figure 3-1

2. On the Demo Test software, firstly click "Open" to open the UVC

camera. The camera gets opened successfully only if "Camera

opened" gets displayed. Then the camera successfully captures the

image and displays it, as shown in Figure 3-2.

Figure 3-2

- 5 -

Secondly, as shown in Figure 3-3, click "Open" to open HID, and "HID

ope ned " wil l g et displayed, w hic h m ean s the HID ope ned

successfully.

Figure 3-3

3. Next, enter the registrant ID in the "User ID" field, then aim your

face at the camera, and click "Add User" to register the user ID.

And as shown in Figure 3-4, if "Add User successfully" appears, it

means that the user ID is successfully registered.

- 6 -

Figure 3-4

Click "Enroll face" to register face, and if "Enroll face successfully"

gets displayed, it means that face registration is successful.

Figure 3-5

As shown in Figure 3-6, the software displays the recognized

registration ID's username, and thus the recognition process is

complete.

Figure 3-6

- 7 -

To clear the user, click the "Clear User" button, and if " Clear User

successfully" gets displayed, it means that the user removal is

successful.

Figure 3-7

Precautions

4.

1. If the registration gets failed, click "Clear User" to clear the user

and register again.

- 8 -

Figure 4-1

- 9 -

2. When clicking "Open" to open HID, and if "No device found" gets

displayed, carry out the following solutions.

Insufficient power supply, plug in two USB ports.

The driver did not get installed successfully, repeat the steps of the

driver installation process.

Figure 4-2

Tabla de contenidos

Otros manuales de Controladores de acceso IP de ZKTeco

ZKTeco

ZKTeco SpeedFace-V3L Manual de usuario

ZKTeco

ZKTeco ProFace X SL Manual de usuario

ZKTeco

ZKTeco ZPad Plus Manual de usuario

ZKTeco

ZKTeco F18 Manual de usuario

ZKTeco

ZKTeco Aurora T1 Manual de usuario

ZKTeco

ZKTeco SpeedFace-V5L Manual de usuario

ZKTeco

ZKTeco C2-260/inBio2-260 Manual de usuario

ZKTeco

ZKTeco TF1600 ZKTeco Manual de usuario

ZKTeco

ZKTeco FaceKiosk-H10A Manual de usuario

ZKTeco

ZKTeco MB10-VL Manual de usuario

ZKTeco

ZKTeco ProCapture-WP Manual de usuario

ZKTeco

ZKTeco LockerPad-7B Manual de usuario

ZKTeco

ZKTeco Ultima Series Manual de usuario

ZKTeco

ZKTeco SC800 Manual de usuario

ZKTeco

ZKTeco KF1000 Series Manual de usuario

ZKTeco

ZKTeco Green Label ProFace X Manual de usuario

ZKTeco

ZKTeco FR1200 Hoja de datos

ZKTeco

ZKTeco Green Label ProlD104 Manual de usuario

ZKTeco

ZKTeco SpeedFace-V3L Manual de usuario

ZKTeco

ZKTeco X7 Manual de usuario

ZKTeco

ZKTeco ProCapture-T Manual de usuario

ZKTeco

ZKTeco Green Label ProFace X Manual de usuario

ZKTeco

ZKTeco C3 Manual de usuario

ZKTeco

ZKTeco F18 Manual de usuario

Manuales populares de Controladores de acceso IP de otras marcas

Jantar

Jantar REX A-1-9 Manual de usuario

2N

2N Access Unit Hoja de instrucciones

Kedacom

Kedacom KSCA120 Series Manual de usuario

H3C

H3C WX2880X Manual de usuario

G4S

G4S S870-EX Guía

PRASTEL

PRASTEL M2000PE Manual de usuario

Allegion

Allegion interflex IF-281 Cylinder Manual de usuario

TECOM

TECOM TS1067E Manual de usuario

Fermax

Fermax Memokey 100C Guía del usuario

Fermax

Fermax CITYLINE MEMOKEY Manual de instrucciones

Software House

Software House iSTAR Pro 2U RM Manual de instrucciones

AKCP

AKCP SP+ Manual de usuario

Bpt

Bpt HNA/102 Manual de usuario

Civintec

Civintec CV9601T-T-1F Manual de usuario

BioMax

BioMax N-X90W Manual de usuario

FingerTec

FingerTec s-Kadex Manual de usuario

H3C

H3C WX5002ACCESSCONTROLLER Manual de usuario

C Prox Ltd

C Prox Ltd DPN-2 Manual de usuario