Zetronix NEPTUNE Manual de usuario
HIDDEN CAMERA BOTTLE
MANUAL
MA N UA
Contents
In the Box
Page 1
Diagram
Page 2
Getting Started
Page 3
Camera Operation
Page 7
Media Playback Computer
Page 8
Date & Time Stamp Settings
Page 9
Troubleshooting
Page 10
Formatting on PC
Page 11
Formatting on Mac
Page 13
Product Specifications
Page 15
Warranty
Page 16
Page 1
E
C
D
A
B
A. 1x Bottle
B. 1x USB cable
C. 1x Extra Labels
D. 1x This Manual
E. 1X Camera Device
Page 2
1
2
3
4
6
5
❹USB Port
❺Function Button
❻Camera Lens
❶Micro USB Card Slot
❷Reset pinhole
❸Hidden blue Light
Page 3
Charge the Camera Device
Please fully charge the camera before
operation.
Connect the included USB cable (B) to an
USB AC Charger, and to the bottle
Camera Device’s USB Port ❹.
While charging the blue light ❸will blink
slowly. Once fully charged the light will
stay on solid.
Connect a micro SD memory card.
A Micro SD memory card is required to
record video files to.
To insert the memory card, hold the
camera device (E) with the camera lens
❻facing you. The memory card’s gold
pins should also be facing you, with the
card notch towards the left.
Page 4
Push the card all the way into the card
slot ❶until you feel a click. You may
have to use your fingernail or a small tool.
To remove the card, simply push it
further in again so it toggles back out.
Notch
Page 5
Hide the Camera
Place the camera device in the bottle’s
depression; Ensure the function button
❺is towards the top of the bottle.
Next use one of the included labels (C) to
wrap it around the bottle while holding
the camera device in place.
Button
Page 6
Function
Button
Make sure the hole on the label lines
up with the camera lens ❻.
Since the function ❺
button will be hidden
behind the label, you
will have to poke around
about half inch above the
camera hole until you feel it
click. It should be right on
top of the “tto”at the end of
the word “SanBeweketto”.
Hole
Camera
Page 7
Turning the camera ON/OFF.
To turn on the camera device, press and
hold the Function Button ❺for 3
seconds. The Blue light ❸will come on
indicating the camera is on stand -by.
To turn off the device, simply press and
hold the Function button ❺again for 3
seconds again, the blue light ❸should
go out.
Recording Video
After turning on the device, while on
stand-by (solid blue light), quickly press
the function button ❺to start the
recording. The blue light ❸will flash 3
times and go out, indicating video is
being recorded.
By quickly hitting the function button ❺
again, the camera will pause recording
and go back to stand by; solid blue light.
Tabla de contenidos
Otros manuales de Cámara de seguridad de Zetronix
Zetronix
Zetronix A6 PRO Manual de usuario
Zetronix
Zetronix ATOM Manual de usuario
Zetronix
Zetronix CRESCENDO Manual de usuario
Zetronix
Zetronix NANO-4K Manual de usuario
Zetronix
Zetronix zAirPure-WiFi Manual de usuario
Zetronix
Zetronix Allston Manual de usuario
Zetronix
Zetronix TRURO PRO Manual de usuario
