Zetronix ATOM Manual de usuario
USER MANUAL
Self-Install
ATOM
Hidden Camera Kit
❶
❺
❹
❼
❽
❷
❾
❶Camera
❷Pinhole Function Button
❸Function LED Indicator
❹Battery Connector
❺Memory Card Slot
❻Recording Mode Switch
❼On/Off Switch
❽USB Power & Charge Port
❾Charge LED Indicator
C M
❻
FUNCTION
❸
ON OFF
On some systems you may get a warning during installation.
This is normal. Simply click RUN ANYWAY and continue.
On an Apple computer you may get a similar warning. Go into
CONTROL PANEL and choose SECURITY.
UNLOCK the security
settings and choose ALLOW ALL
Once you have installed the program, make sureyou turn
SECURITY SETTINGS back on.
Insert a Micro SD Memory Card into the card slot.
Date/Time Stamp Setup –2/2
Continuous Recording Mode
1. Connect the battery to the battery connector
❹
2. Insert a Micro SD memory card into the card slot
❺
3. Switch the Recording Mode Switch
❻
to the "C" position.
4. Place the On/Off switch
❼
to the “On”position.
The function LED indicator
❸
will blink blue five times and
go out to indicate a recording has started.
To pause the recording, use the included pin to
press the function button
❷
this will put the camera
in stand-by mode indicated by a solid blue light.
Operation –1/2
To resume recording, press the function button
❷
again.
The LED will blink blue twice and turn off to indicate that it is
recording again.
Motion Detection Recording Mode
1. Connect the battery to the battery connection ❹
2. Insert a Micro SD memory card into the card slot ❺
3. Switch the Recording Mode Switch ❻to the "M" position.
4. Place the On/Off switch ❼to the “On”position.
The LED indicator ❸will blink Blue three times and Red once
to indicate the recording has started.
When motion is detected the camera will record for 3 minutes. It
will stop recording if no motion is detected during the 3 minutes.
Use the included pin to press the Function button ❷to pause
all recording and enter standby mode; indicated by solid Red.
Press it again to resume recording. The Red LED will turn off
and continue recording once motion isdetected.
Operation –2/2
Formatting the memory card
deletes all files and may fix
recording issues caused by
memory corruption.
Locateyour hard drive directory.
It will be under “MyComputer”
or “This PC”. You can also open a
new File Explorer window and
your drives will be listed there.
The camera will appear as a
removabledrive likethis.
Right Click on the removable drive and select Format
Formatting Memory on a PC/Windows - 1/2
From the options shown, make sure
thatyou have selected FAT32 or
asyour file system. Leave other
settings at their defaults.
ClickStart.
WARNING: Anyfilesonyourcard
willbelost
including your time-
stamp settings. Record at least one
video with your camera to install the
file directory on your card. After you
have restored the directory you can re-
install thetime-stamp settings.
Formatting Memory on a PC/Windows - 2/2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Zetronix
Zetronix
Zetronix Allston Manual de usuario
Zetronix
Zetronix zAirPure-WiFi Manual de usuario
Zetronix
Zetronix CRESCENDO Manual de usuario
Zetronix
Zetronix TRURO PRO Manual de usuario
Zetronix
Zetronix NEPTUNE Manual de usuario
Zetronix
Zetronix NANO-4K Manual de usuario
Zetronix
Zetronix A6 PRO Manual de usuario
