Zavio F1100 Manual de usuario
Zavio F1100 / F1105 Quick Installation Guide
Please follow the installation steps below to set up F1100 / F1105 IP Camera.
Check the package contents against the list below. See P.1
Physical overview. See P.1
Install the hardware and connect all cables. See P.2
Microsoft OS: Use the software CD to install Intelligent IP Installer.See P.2
Access the IP Camera using Intelligent IP Installer. See P.2
Mac OS using Safari Browser. See P.4
Light environment setting. See P.5
Change the Web Interface into your preferred language. See P.5
Use IP Camera via Mobile Phone. See P.5
Wireless Setting(For F1105). See P.5
Application of IP Camera. See P.6
For more information, please check the User Manual available in the Software CD or you can download the
latest software from http://www.zavio.com
Package Contents
Physical overview
Reset: When the device is powered, press the Reset Button to reboot the device, or hold the Reset Button for
10 seconds to set the settings back to factory default.
Note: F1105 with a build-in antenna.
Camera
F1100 / F1105 IP Camera
Quick Installation Guide
Brief product information and quick installation
Software CD
IP Surveillance Software
Intelligent IP Installer
User Manuals
EZVuu Installation Wizard
Language Packs
Mounting Bracket
(1) screws, (2) plastic wall anchors, and (3) camera bracket
Adaptor
5V DC, 1A
1
Install the hardware and connect all cables
a. Wall mounting and Ceiling mounting
1. Use the 3 supplied screws to fix the base plate to a flat surface.
2. Loosen the lock ring to adjust the desired angle of the camera.
3. Tighten the lock ring.
b. Connect cables and power supply
b1. Wire Connection
1. Connect the power adaptor to the IP Camera.
2. Use a standard RJ-45 network cable to connect the IP Camera
to the Network connection
b2. Wireless Connection (F1105)
1. Connect power adaptor to the IP Camera.
2. Connect to Wi-Fi.
Microsoft OS:Use the software CD to install Intelligent IP Installer
Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow these
steps to install the firmware.
Select “Intelligent IPInstaller”and follow the installation process to complete the installation.
Access the IP Camera using Intelligent IP Installer
1. Before using Intelligent IP Installer, please check two settings.
a. Browser’s Internet Properties →Security
→Default Level
b. Browser’s Internet Properties →Privacy
→Uncheck Pop-up Blocker
2
b1
b2
b1
b2
2. Click the Intelligent IP Installer Icon on your desktop. The main page will show up listing all active
camera and video server devices. Select the relevant IP camera from the list and click Link to IE.
4. When accessing the IP Camera for the first time, a yellow information bar appears below the address bar:
This website wants to install the following add-on: ‘AxvideoView.cab from ‘Zavio Inc’.
5. Click the information bar, and select Install ActiveX control.
6. Click Install.
3. Enter your Username and Password
to login to the IP Camera.
(Default is admin / admin)
3
3
3
Mac OS using Safari Browser
7. Live video displays in the centre of your web browser.
1. Select Safari icon
4. The monitor image will be displayed in your
browser.
2. Click Bonjour function and select the camera
you wish to access.
3. Enter name and password to login to the IP
camera. (Default is admin / admin)
4
3. Enter name and password to login to the IP
camera. (Default is admin / admin)
Lighting environment setting
The default setting of lighting environment is Auto. However, you may also select 50 or 60 Hz upon the
lighting environment of your country.
Go to “Basic setup→Video”, choose the environment setting you wish.
Change the Web Interface into your preferred language
The languages options are on the left side of the setting screen, please select one and the web interface will
change into your preferred language.
Use IP Camera via Mobile Phone
1. Using IPCamera via iPhone
Select Safari function →Enter IP address in the web link →enter username and password (default value
admin/admin)
2. Mobile phone viewing- 3G Mobile Phone Streaming Viewing
For 3G mobile phone viewing, please type “ rtsp://<IP>:<PORT>/video.mjpg ”into your 3G web media
player.
<IP> is the IP address of your IP camera;
<PORT> is the RTSP port of your IP camera (Default value is 554.)
Example: rtsp://100.10.10.1:554/video.mjpg
Wireless Setting( For F1105)
Power the IP Camera and connect an Ethernet network cable to the IP Camera’s LAN port. Using Intelligent
IP Installer and entering the camera’s setting page.
Please go to “Basic setup →Network →Wireless”, set the WLAN option to “Enable”
1. Click Refresh and choose the Access Point you wish to connect.
2. Use DHCP (default) to connect through a dynamic IP or click Manual to assign a static IP for the wireless
connection.
5
3. Enter the password within the Active transmit key field if required.
4. Click “Save”to apply settings. The Wireless IP address appears in the IP address field.
Note: The wireless private IPaddress can be found in Intelligent IP Installer.
Application of IP Camera
Wireless IP address
6
Otros manuales para F1100
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cámara IP de Zavio
Zavio
Zavio D6330 Manual de usuario
Zavio
Zavio F521E Manual del operador
Zavio
Zavio F531E Manual de usuario
Zavio
Zavio N6031 Manual de usuario
Zavio
Zavio F731E 35M Instrucciones de uso
Zavio
Zavio F5100 Manual de usuario
Zavio
Zavio D7320 Manual de usuario
Zavio
Zavio M511E Instrucciones de uso
Zavio
Zavio F312A Instrucciones de uso
Zavio
Zavio F611E Manual de usuario
Zavio
Zavio D510E Instrucciones de uso
Zavio
Zavio P5110 Manual de usuario
Zavio
Zavio F210A Manual de usuario
Zavio
Zavio F312A Instrucciones de uso
Zavio
Zavio D7210 Manual de usuario
Zavio
Zavio P8220 Manual de usuario
Zavio
Zavio F210A Manual de usuario
Zavio
Zavio F210A Instrucciones de uso
Zavio
Zavio F510E Manual de usuario
Zavio
Zavio F7110 Manual de usuario
