Zavio D4220 Manual de usuario

86085A5000030

/ B5210

ZAVIO Outdoor IR Mini Dome

Quick Installation Guide

Please follow the installation steps below to set up your IP Camera.

Check the package contents with the list below. See P.1

Physical overview. See P.2

I/O Terminal Block Circuit. See P.3

I/O Terminal Block Pin Definition. See P.3

LED Indicator Definition. See P.3

Power mode. See P.4

Installation of hardware and connection of all cables. See P.4

Windows: Go to Zavio website and download Camera Installation Tool. See P.7

Access the IP Camera using Camera Installation Tool. See P.8

MAC OS: using Safari Browser. See P.11

Lighting environment. See P.13

Change language of the web interface. See P.13

Application of IP Camera. See P.14

Package Contents

Camera

IP Camera

Quick Installation Guide

Brief product information and quick installation

Accessory

Alignment Sticker, screw pack for wall and

ceiling mounting, desiccant.

Software

The following software and information are available online:

-Video Management Software

-Camera Installation Tool

-User manuals

-Camera Language Packs

You may download the above at http://www.zavio.com/downloads.php or you

may scan the below QR-Code.

To activate Video Management Software, please enter the license key below.

Physical overview

Built-in Microphone

Dome bubble

Top cover

Lens

MicroSD/SDHC/SDXC

Reset

Power LED Indicator

Network LED Indicator

External I/O connector

Internal microphone

Light Sensor

IR LEDs

I/O Terminal Block Circuit

Note: Please use the supplied waterproof RJ45 connector and seal all connectors tightly to avoid moisture.

I/O Terminal Block Pin Definition

Pin Color

Definition

Description

Max. V/A

Red

+ 12VDC

12V DC

1.2W

Black

Digital

Output 1

Uses an NPN transistor with the emitter connected to the

GND pin. If used with an external relay, a diode must be

connected in parallel with the load for protection against

voltage transients.

100 mA

24V

Y+B

Yellow+Black

Audio

Line In

Connect the wires of the audio input device to GND (Pin 4)

and AUDIO.IN (Pin 1).

W+B

White+Black

Audio

Line Out

Connect the wires of the audio output device to GND (Pin 4)

and AUDIO.OUT (Pin 2).

G+B

Grey+Black

Digital

Input 1

Connected to GND to activate, or leave floating

(or unconnected) to deactivate.

30V DC

Brown+B

Brown+Black

Ground

LED Indicator

LED

Color

Indication

Network

Blue

Solid blue when network is established.

Blink blue when there is network activity.

Power

Red

Solid red for booting up process

Blue

Solid blue for booting up completion

Purple

Blink purple during: (a) firmware upgrade, (b) reset

button pressed for at least 5 sec to factory default.

Unlit

When reset button is pressed or when power off.

Power Mode

PoE Mode

Power Requirement

PoE (IEEE802.3af) with Class 3

Power Consumption

4.95 W

Adaptor Mode

Power Requirement

12V/1A Adaptor

Power Consumption

5.0 W

Install the hardware and connect all cables

A. RJ45 waterproof connector

1) Make sure all components are assembled as shown on the below graph.

2) Check that the ethernet port and the waterproof main body are tightly fasten.

3) Please use the supplied waterproof RJ45 connector and seal all connectors

tightly to avoid moisture.

B. Wall and ceiling mounting

1) Attach the alignment sticker to the wall/ceiling. Drill two holes into the wall -

two for screws and one for cable.

2) Align the screw holes on the metal base to the two plastic anchors on the

wall/ceiling, insert the supplied screws to the hole and secure them.

C. Connect all cables

E1. Without Power over Ethernet (PoE) connection

1. Connect the power adaptor to the IP Camera.

2. Use a standard RJ-45 network cable and connect the IP Camera to a

hub/switch/router.

E2. Power over Ethernet (PoE)

1. Use a standard RJ-45 network cable and connect the IP Camera to a

PoE-enabled hub/switch/router.

D. To adjust the view angle- 3 axis mechanism design

1) Turn the lens module right and left to your desired pan position.

2) Turn the lens module up and down to your desired tilt position.

3) Turn the lens module to adjust the image orientation to satisfied angle.

Important:

Make sure the IR LEDs are not blocked by the housing as it will affect the IR performance.

If the image is upside down, please use the image rotate function in Video Setting.

E. Completion

Fix the tamper-proof screws using supplied special hex. Be careful do not scratch

the cover glass. Clean the dome bubble to remove the dust and finger print.

Windows: Go to Zavio Website and download Camera Installation Tool

Please go http://www.zavio.com/softwaredownloads.php download “Camera

Installation Tool”. And follow the installation process to complete the

installation.

Access the IP Camera using Camera Installation Tool

1. Please check two settings before using Camera Installation Tool.

a. Browser’s Internet Properties →Security→Default Level

b. Browser’s Internet Properties →Privacy →Uncheck Pop-up Blocker

2. Click the Camera Installation Tool Icon on your desktop. The main page will

show up listing all active camera and video server devices. Select the

desired IP cameras from the list and click Link to IE.

3. Enter Username and Password to login to the IP Camera.

(Default is admin / admin)

Otros manuales para D4220

Otros manuales de Cámara IP de Zavio

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario