YASKAWA VS mini C Series Manual de usuario

YASKAWA

VS mini C Series

INSTRUCTION MANUAL

ULTRA-COMPACT ALL DIGITAL INVERTER

ADVANCED FUNCTION TYPE

Upon receipt of the product and prior to initial operation, read

these instructions thoroughly,and retain for future reference.-,_

YASKAWA MANUAL NO. TOE S606-10.20B

PREFACE

YASKAWA's VS mini is such a small and simple

inverter; as easy as using a contactor. This instruction

manual describes installation, maintenance and

inspection, troubleshooting, and specifications of the

VS mini. Read this instruction manual thoroughly

before operation.

YASKAWA ELECTRIC CORPORATION

General Precautions

• Some drawings in this manual are shown with the protective cover or

shields removed, in order to describe detail with more clarity. Make

sure all covers and shields are replaced before operating this product.

• This manual may be modified when necessary because of improvement

of the product, modification, or changes in specifications.

Such modifications are denoted by a revised manual No.

• To order a copy of this manual, if your copy has been damaged or lost,

contact your YASKAWA representative.

• YASKAWA is not responsible for any modification of the product

made by the user, since that will void your guarantee.

NOTES FOR SAFE OPERATION

Readthis instruction manual thoroughly before installation, operation,

maintenance or inspection of the VS mini. In this manual, NOTES FOR

SAFE OPERATION are classified as "WARNING" or "CAUTION".

lndicates, a potentially hazardous situation which,if not avoided, could

result in death or serious injury to personnel.

Indicates a potentially hazardous situation which, if not avoided,may result

in minor or moderate injury to personnel and d;amage to equipment.

It may also be used to alert against unsafe practices.

Even items described in _ may result in a vital accident in some

situations. In either case,follow these important notes.

O : These are steps to be taken to insure proper operation.

RECEIVING

/_ CAUTION

(Ref. page)

•" Do not install or operate any inverter which is damaged or

has missing parts.

Failure to observe this caution may result in personal injury or

equipment damage.- ....................................... 12

MOUNTING

/_ CAUTION

(Ref. page)

• Life the cabinet by the cooling fin. When moving the

unit, never lift by the plastic case or the terminal covers.|

Otherwise, the main unit may be dropped causing damage

to the unit.. ............................................. 14

• Mount the inverter on nonflammable material (i.e. metal).

Failure to observe this caution can result in a fire.. .............. 14

• When mounting units in an enclosure, install a fan or

other cooling device to keep the intake air temperature

below 122"F (50°C).

Overheating may cause a fire or damage to the unit.. ............ 15

• The VS mini generates heat. For effective cooling,

mount it vertically.

Refer to the figure in "Mounting Dimensions" on page15.

WIRING

Z_x WARNING

(Ref. page)

• Only commence wiring after verifying that the power

supply is turned OFF.

Failure to observe this warning can result in an electrical shock

or a fire.- ................................................ 16

• Wiring should be performed only by qualified personnel.

Failure to observe this warning can result in an electrical shock

or a fire.- ................................................ 16

• When wiring the emergency stop circuit, check the wiring

thoroughly before operation.

Failure to observe this warning can result in personal injury. • ..... 16

(Ref. page)

•Make sure to ground the ground terminal Q.

(Ground resistance : 100_ or less)

Failure to observe this warning can result in an electrical shock

or a fire., ................................................ 17

A'k CAUTION

(Ref.page)

• Verify that the inverter rated voltage coincides with the

AC power supply voltage..

Failure toobservethiscautioncan resultin personalinjury

or a fire.

• Do not perform a withstand voltage test of the inverter.

It may cause semi-conductor elements to be damaged.

• To connect a braking resistor, braking resistor unit or

braking unit, follow the procedures described in

this manual.

Improperconnectionmay causeafire.- ........................ 17

• Make sure to tighten terminal screws of the main circuit

and the control circuit.

Failure to observe this caution can result in a malfunction,

damage or a fire.- ......................................... 16

• Never connect the AC main circuit power supply to

output terminals U, V and W.

The inverter will be damaged and invalidate the

guarantee.. ................................. .............. 16

• Do not connect or disconnect wires or connectors

while power is applied to the circuit.

Failure to observe this caution c_/nresult in personal injury.

• Do not change signals during operation.

The machine or the inverter may be damaged.

OPERATION

/_ WARNING

(Ref. page)

• Only turn ON the input power supply after replacing

the digital operator/blank cover (optional) and switching

the dip switch.Do not remove the digital operator or

the covers while current is flowing.

Failure to observe this warning can result in an electrical shock.. - ••20

• Never operate the digital operator or the switches

when your hand is wet.

Failure to observe this warning can result in an electrical shock.

• Never touch the terminals while current is flowing,even

during stopping.

Failure to observe this warning can result in an electrical shock.

•When the fault retry function is selected, stand clear of

the inverter or the load, since it may restart suddenly

after being stopped.

(Construct machine system, so as to assure safety for personnel,

even if the inverter should restart.) Failure to observe this

warning can result in personal injury.. ........................ 38

• When continuous operation after power recovery is

selected, stand clear of the inverter or the load, since

it may restart suddenly after being stopped.

(Construct machine system, so as to assure safety for personnel,

even if the inverter should restart.) Failure to observe this

warning can result in personal injury.- ........................ 34

• Since the digital operator stop button can be disabled

by a function setting, install a separate emergency

stop switch.

Failure to observe this warning can result in personal injury.

• If an alarm is reset with the operation signal ON, the inverter

restarts automatically.Only reset the alarm after verifying

that the operation signal is OFF.

Failure to observe this warning can result in personal injury.. ...... 20

Z_ CAUTION "

(Ref. page)

• Never touch the heatsink or'braking resistor since

the temperature is very high.

Failure to observe this caution can result in harmful burns

to the body.

• Since it is easy to change operation speed from low to

high speed, verify the safe working range Of the motor

and machine before operation.

Failure toobserve this caution can result in personal injury

and machine damage.

• Install a holding brake separately if necessary.

Failure to observe this caution can result in personal injury.

• Do not change signals during operation.

The machine or the inverter may be damaged.

• All the constants of the inverter have been preset

at the factory. Do not change the settings unnecessarily.

The inverter may bedamaged..• -."........................... 20

MAINTENANCE AND INSPECTION

/_ WARNING

(Ref. page_

Never touch high-voltage terminals in the inverter.

Failure to observe this warning can result in an electrical shock ...... 59

Disconnect all power before performing maintenance

or inspection. Then wait at least one minute after

the power supply is disconnected and all LED's are

extinguished.

The capacitors are still chargecl and can be dangerous." ............ 59

WARNING

(Ref. page)

Do not perform withstand voltage test on any part

of the VS mini.

This electronic equipment uses semiconductors and is

vulnerable to high voltage.. ................................. 59

Only authorized personnel should be permitted to perform

maintenance, inspections or parts replacement.

[Removeall metalobjects (watches,bracelets,etc.)

before operation.[

(Usetoolswhich areinsulatedagainstelectrical shock.)

Failure to observe this warning can result in an electrical shock,. .... 59

/_ CAUTION

(Ref. page)

• The control PC board employs CMOS ICs.

Do not touch the CMOS elements.

They are easily damaged by static electricity.. .................. 59

• Do not connect or disconnect wires or connectors

while power is applied to the circuit.

Failure to observethiscaution canresult in personalinjury.. ....... 59

Others

wAaNING I

•Nevermodifytheproduct.

Failure to observe this warning can result in an electrical shock or

personal injury and will invalidate the guarantee.

WARNING LABEL

A warning label is displayedon the front cover of the inverter,as shown

below. Follow these inslructions when handling the inverter.

PLASTIC COOLINGFIN _ Digital operator JVOP-120

CASE /

,,A,OS\,ERM,NAL

IND_CAIOR_ COVER

_TERMINAL

COVERS

Warning Label

Z_ WARNING

May cause

electric shock.

• Disconnect all

power before

opening terminal

cover of unit. Wait

1 minute until DC

Bus capacitors

discharge.

CONTENTS

NOTES FOR SAFE OPERATION .............................. 3

1. RECEIVING ............................................................. 12

•Checking the Name Plate .............................................. 12

2.IDENTIFYINGTHE PARTS..................................13 •

3. MOUNTING ............................................................. 14

• Choosing a Location to Mount the Inverter ......................... 14

m Mounting Dimensions .................................................... 15

4. WIRING .................................................................... 16

Wiring Instructions ........................................................ 16

nWire and Terminal Screw Sizes ....................................... 16

• Wiring the Main Circuit .................................................. 17

m Wiring the Control Circuit ............... : ............................... 18

mWiring Inspection .......................................................... 19

5. OPERATING THE INVERTER ............................ 20

m Test Run .................................................................... 20

m Operating the Digital Operator ........................................ 21

• LED Description ........................................................... 23

• Simple Data Setting ...................................................... 27

6.PROGRAMMING FEATURES.............................29

• Constant Set-up and Initialization .................................... 29

• Setting Operation Conditions .......................................... 30

Reverse run prohibit (n05) ............................................ 30

Multi-step speed selection ............................................ 30

Operating at low speed ................................................ 31

Adjusting frequency setting signal .................................. 32 •

Adjusting frequency upper and lower limits ...................... 33

Using two accel/decel times.......................................... 33

Automatic restart after momentary

power loss (n36) ........................................................ 34

Soft-start characteristics (n49) ....................................... 34

Otros manuales para VS mini C Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Inversor de YASKAWA

YASKAWA

YASKAWA VS MINI J7 Manual de usuario

YASKAWA

YASKAWA L7B Manual de usuario

YASKAWA

YASKAWA VS mini C Series Manual de usuario

YASKAWA

YASKAWA FSDrive-MV1S Manual de usuario

YASKAWA

YASKAWA VS MINI J7 series Manual de usuario

YASKAWA

YASKAWA Varispeed-606PC3 Manual de usuario

YASKAWA

YASKAWA VS MINI J7 Manual de usuario

YASKAWA

YASKAWA SOLECTRIA XGI 1500 Series Instrucciones de funcionamiento

YASKAWA

YASKAWA VS-606V7 Series Manual de usuario

YASKAWA

YASKAWA SOLECTRIA XGI 1500 Series Instrucciones de funcionamiento

YASKAWA

YASKAWA Varispeed f7 Manual de instrucciones

YASKAWA

YASKAWA VARISPEED-616G5 Manual de usuario

YASKAWA

YASKAWA Solectria PVI 25TL-208 Instrucciones de funcionamiento

YASKAWA

YASKAWA CIMR-SSA Series Manual de usuario

YASKAWA

YASKAWA VS mini C Series Manual de usuario

YASKAWA

YASKAWA E7U Manual del propietario

YASKAWA

YASKAWA Varispeed V7 Series Manual de usuario

YASKAWA

YASKAWA VS-606V7 Series Manual de usuario

YASKAWA

YASKAWA VS-616G5 Series Manual de usuario

YASKAWA

YASKAWA Varispeed V7 Manual de usuario

YASKAWA

YASKAWA VS MINI J7 Manual de usuario

YASKAWA

YASKAWA SOLECTRIA XGI 1500-DCG Series Instrucciones de funcionamiento

YASKAWA

YASKAWA Varispeed L7 Manual de usuario

YASKAWA

YASKAWA Varispeed 606PC3 Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario