YASKAWA JOHB-GA50 Manual de usuario
MANUAL NO. TOEP C720600 07B
YASKAWA AC Drive Option
Option Card Mounting Kit
Installation Manual
Model JOHB-GA50
To properly use the product, read this manual thoroughly and retain for easy
reference, inspection, and maintenance. Ensure the end user receives this
manual.
This Page Intentionally Blank
2YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual
YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual 3
Table of Contents
1. Receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Applicable Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. General Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Supplemental Safety Information . . . . . . . . . . . . . . . . . . . . . . . 5
Section Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Compatible Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Option Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Necessary Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . 10
Option Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installation Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Install the Option Card Mounting Kit (Procedure A) . . . . . . . .11
Install the Option Card Mounting Kit (Procedure B) . . . . . . . 20
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1 Receiving
4YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual
1 Receiving
◆Applicable Documentation
Document Description
YASKAWA AC Drive
Option
Option Card Mounting
Kit
Installation Manual
Read this manual before you install this option to the
drive.
This manual gives information about how to install an
option card mounting kit.
YASKAWA AC Drive
Option
Installation Manual
Read this manual before you install this option to the
drive.
The manual provides information about wiring, setting,
functions, and troubleshooting. The manual is packaged
together with the product.
YASKAWA AC Drive
Manuals
For information about drive settings, refer to the manuals
for the drive with which you are using this option.
The manuals provide information about basic installation,
wiring, operation procedures, functions, troubleshooting,
and maintenance.
The manuals also include important information about
parameter settings and tuning the drive.
You can download drive manuals from the Yaskawa
product and technical information website shown on the
back cover of this manual.
◆Glossary
Terminology Used
in this Document Description
Drive YASKAWA AC Drive GA500
Case, Option YASKAWA AC Drive Option
Option Card Mounting Kit
2 General Safety
YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual 5
2 General Safety
◆Supplemental Safety Information
DANGER This signal word identifies a hazard that will cause
serious injury or death if you do not prevent it.
WARNING This signal word identifies a hazard that can cause
death or serious injuries if you do not prevent it.
CAUTION Identifies a hazardous situation, which, if not avoided,
can cause minor or moderate injury.
NOTICE This signal word identifies a property damage message
that is not related to personal injury.
◆Section Safety
General Precautions
•Some figures in the instructions include options and drives without covers or
safety shields to more clearly show the inside of the drive. Replace covers and
shields before operation. Use options and drives only as specified by the
instructions.
•The figures in this manual are examples only. All figures do not apply to all
products included in this manual.
•Yaskawa can change the products, specifications, and content of the instructions
without notice to make the product and/or the instructions better.
•If you damage or lose these instructions, contact a Yaskawa representative or the
nearest Yaskawa sales office on the rear cover of the manual, and tell them the
document number on the front cover to order new copies.
DANGER Electrical Shock Hazard. Do not examine, connect, or
disconnect wiring on an energized drive. Before servicing, disconnect all power
to the equipment and wait for the time specified on the warning label at a
minimum. The internal capacitor stays charged after the drive is de-energized.
The charge indicator LED extinguishes when the DC bus voltage decreases
below 50 Vdc. When all indicators are OFF, measure for dangerous voltages to
make sure that the drive is safe. If you do work on the drive when it is
energized, it will cause serious injury or death from electrical shock.
3 Overview
6YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual
CAUTION Burn Hazard. Do not touch a hot drive heatsink. De-
energize the drive, wait for a minimum of 15 minutes, then make sure that the
heatsink is cool before you replace the cooling fans. If you touch a hot drive
heatsink, it can burn you.
WARNING Electrical Shock Hazard. Only let approved personnel
install, wire, maintain, examine, replace parts, and repair the drive. If personnel
are not approved, it can cause serious injury or death.
WARNING Sudden Movement Hazard. Tighten the screws to the
specified tightening torque. Incorrect tightening torques can cause damage to
equipment and cause serious injury or death from falling equipment.
NOTICE Damage to Equipment. When you touch the drive and
circuit boards, make sure that you observe correct electrostatic discharge
(ESD) procedures. If you do not follow procedures, it can cause ESD damage
to the drive circuitry.
3 Overview
Use this option to install a communication option to a drive.
You can use this option when the installation environment of the
drive meets the specifications shown in Installation Environment
on page 7.
3 Overview
YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual 7
A - Option card mounting
kit components
B - Communication
option
C - Front cover
Figure 3.1 Option Card Mounting Kit
◆Compatible Products
This installation kit is compatible with these drives:
•GA500
◆Installation Environment
The installation environment is important for the lifespan of the
product and to make sure that the drive performance is correct.
3 Overview
8YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual
Make sure that the installation environment agrees with these
specifications.
Environ
ment
Conditions
Area of Use Indoors
Power
Supply
Overvoltage Category III (IEC60664)
Ambient
Temperature
Setting
IP20/UL Open Type: -10 °C to +50 °C (14 °F to 122 °F)
IP20/UL Type 1: -10 °C to +40 °C (14 °F to 104 °F)
•When you install the drive in an enclosure, use a cooling fan or air
conditioner to keep the internal air temperature in the permitted
range.
•Do not let the drive freeze.
Humidity 95%RH or less
Do not let condensation form on the drive.
Storage
Temperature
-20 °C to +70 °C (-4 °F to +158 °F) (short-term temperature during
transportation)
Surrounding
Area
Pollution degree 2 or less (IEC 60664-1)
Install the drive in an area without:
•Oil mist, corrosive or flammable gas, or dust
•Metal powder, oil, water, or other unwanted materials
•Radioactive or flammable materials.
•Harmful gas or fluids
•Salt
•Direct sunlight
Keep wood and other flammable materials away from the drive.
Altitude
1000 m (3281 ft) Maximum
Note:
Derate the output current by 1% for each 100 m (328 ft) to install
the drive in altitudes between 1000 m to 4000 m (3281 ft to 13123
ft).
It is not necessary to derate the rated voltage in these conditions:
•Installing the drive at 2000 m (6562 ft) or lower
•Installing the drive between 2000 m to 4000 m (6562 ft to 13123
ft) and grounding the neutral point on the power supply.
4 Receiving
YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual 9
Environ
ment
Conditions
Contact Yaskawa or your nearest sales representative when not
grounding the neutral point.
Vibration •10 Hz to 20 Hz: 1 G (9.8 m/s2, 32.15 ft/s2)
•20 Hz to 55 Hz: 0.6 G (5.9 m/s2, 19.36 ft/s2)
Installation
Orientation
Install the drive vertically or horizontally for sufficient airflow to cool
the drive.
Refer to the drive Technical Manual for more information.
NOTICE Do not put drive peripheral devices, transformers, or
other electronics near the drive. Shield the drive from electrical interference if
components must be near the drive. Components near the drive can cause
incorrect drive operation from electrical interference.
NOTICE Do not let unwanted objects, for example metal
shavings or wire clippings, fall into the drive during drive installation. Put a
temporary cover over the drive during installation. Remove the temporary cover
before start-up. Unwanted objects inside of the drive can cause damage to the
drive.
4 Receiving
1. Examine the products for damage.
If there is damage to the products, contact the shipping
company immediately. The Yaskawa warranty does not
include damage from shipping.
2. Verify the product model number to make sure that you
received the correct model.
If you have problems with the products, contact the distributor
where you purchased the products or the Yaskawa sales office
immediately.
5 Installation Procedure
10 YASKAWA TOEP C720600 07B Option Card Mounting Kit Installation Manual
◆Option Package Contents
Option Card
Mounting Case
Ground
Wire Mounting Screw Insulator
#1
#4
A - 3 × 8 tapping screw: #2
B - 4 × 12 tapping screw: #1
#1
Note:
•Use the LED label packaged with the communication option.
•The ground wires and screws included with the communication option are not
necessary.
◆Necessary Tools
To install the attachment, use Phillips screwdriver #2.
5 Installation Procedure
CAUTION Crush Hazard. Tighten terminal cover screws and hold
the case safely when you move the drive. If the drive or covers fall, it can cause
moderate injury.
◆Option Dimensions
The installed option adds 27 mm (1.06 in) to the total depth of the
drive.
Tabla de contenidos
Otros manuales de Controladores de YASKAWA
YASKAWA
YASKAWA CIMR-JA Series Manual de instalación y operación
YASKAWA
YASKAWA MP900 Series Manual de usuario
YASKAWA
YASKAWA Varispeed f7 Manual de usuario
YASKAWA
YASKAWA SI-EL3/V Manual de usuario
YASKAWA
YASKAWA MP920 Manual de usuario
YASKAWA
YASKAWA YRC1000micro Manual de usuario
YASKAWA
YASKAWA mp2500 Manual de usuario
YASKAWA
YASKAWA GPD515C Manual de usuario
YASKAWA
YASKAWA Lift Inverter L1000V Manual de usuario
YASKAWA
YASKAWA PROFIBUS-DP Manual de usuario
YASKAWA
YASKAWA MP23xxxiec Series Manual de usuario
YASKAWA
YASKAWA YRC1000 Guía del usuario
YASKAWA
YASKAWA SI-EN3 Manual de usuario
YASKAWA
YASKAWA SI-EM3 Manual de usuario
YASKAWA
YASKAWA iC9200 Series Manual de usuario
YASKAWA
YASKAWA YRC1000 Manual de usuario
YASKAWA
YASKAWA MP2200 Manual de usuario
YASKAWA
YASKAWA PG-X2 Manual de usuario
YASKAWA
YASKAWA Motoman DX200 Manual de usuario
YASKAWA
YASKAWA motoman NX100 Manual de usuario
