Yamato AW-300P Manual de usuario

Digital Portion Scale

AW-300P

SERVICE MANUAL

PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE

STARTING TO USE THE SCALES

TABLE OF CONTENTS

TABLE OF CONTENTS................................................................... 1

SPECIFICATIONS........................................................................... 2

OVERLAY........................................................................................ 2

KET FUNCTIONS............................................................................ 3

USING SCALE................................................................................. 4

USING TARE FUNCTION................................................................ 4

USING HOLD FUNCTION............................................................... 5

SETTING MODE ............................................................................. 6

SETTING FUNCTION DESCRIPTION............................................ 6

CALIBRATION PROCEDURE ........................................................ 7

CONTROL PANEL........................................................................... 8

LCD FORMAT................................................................................. 9

PART LIST & ASSEMBLY DRAWING........................................... 10

TROUBLE SHOOTING ................................................................. 12

INSTRUCTION FOR CHARGEAND CONNECT.......................... 13

INSTRUCTIONS FOR REPLACING BATTERIES ........................ 14

Parameters of RS232 interface ........................................................ 15

Connecting with PC ........................................................................ 16

ERROR MESSAGE........................................................................ 17

SPECIFICATIONS

Model AW-300P

Capacity 300 kg x 0.1 kg / 660 lb x 0.2 lb

Weight Unit kg / lb

LCD Readout 1.0” LCD display with 5 1/2 digits

Dimensions Assembled size: 210×110×45 mm

Platform size: 550×550x65 mm

Buttons ON/OFF, UNIT, HOLD, TARE

Power

Supply



6-AA

size

batteries



15V

adapter

100~

300mA

Operation

Temperature 5℃/ 35℃

OVERLAY

KET FUNCTIONS

Key Description

Turn ON/OFF the scale

To hold weighing result on the display / determine stable

weighing value

To select the weighing unit. (kg/lb)

Tare weight during weighing process.

The ‘Hold’ weighing function is active.

Stored ‘Tare’value.

Stable symbol

Minor weight value

Indicates scale is at center of zero

Low battery indication

USING SCALE

WEIGHING

Switch on the scale using key. The diagnostic scale self-check is

performed and the software version is displayed.

The scale is ready for weighing when the “ 0.0 kg ” displays on the

screen.

Person stands on the middle of the scale for weighing. Wait until the

scale stabilizes and stable sign (ο) shows on the screen

Direction:

If a weight is over the scale capacity, the display will show the „Err”

message (= overload).

USING TARE FUNCTION

Tare allows the user to zero the instrument to cancel the weight of a

container/ clothes from the reading of the instrument, thus giving the true

weight of the animal being tested.

Place the object need to be tare on the tread platform.

Press TARE key after the weight stabilizes and stable sign displays.

Move the animal need to be weighed on the scale platform(without

removing the tare object)

To delete the saved tare value, remove the tare object from the tread

platform and press [TARE] key.

USING HOLD FUNCTION

AW-300P is provided with the integrated hold function (determination of

average value). It’s weighing accurately although they are not still on the

scale plate. Once the HOLD key is pressed, the weight reading will remain

on the display, so the reading can easily be read.

Switch ‘ON’ the scale using [ON/OFF] key. The diagnostic

self-checks is performed. The scale is ready for weighing when the

„0.0 kg” displays on the screen.

Place weight on the center of the scale plate.

Press the [HOLD] key. When the triangle is flashing on the display,

the scale records the fluctuating weight values and then calculates

average weight and displays the result on the screen.

Move the weight from the scale platform, the weight reading will

remain on the display.

Press the [HOLD] key again to return the scale to the normal

weighing mode.

SETTING MODE

With the weighing scale switched on, long press TARE 3seconds, to enter

into the setting mode. The display will shows SETUP and then followed

by UNIT appears.

A selection is made by pressing the TARE key means: →,

and the HOLD key means:↓

SETTING FUNCTION DESCRIPTION

: Unit (kg/lb/oz)

: Auto off time (120s/180s/240s/300s/off)

: Hold range (2d/5d/10d/15d)

: Touchless Tare Function (on/off)

CALIBRATION PROCEDURE

In weighing mode press the UNIT key and keep it pressed until “CAL”

followed by the weight value of the required adjustment weight in

displayed. “LOAD” is displayed alternatively.

Carefully place the required adjustment weight in the centre of the

weighing plate press TARE key, adjustment is started.

Wait until the stability display appears, after that the adjustment is finished.

The balance will automatically return to weighing mode upon successful

completion of the adjustment and will display the weight of the adjustment

weight.

Take away adjustment weight.

CONTROL PANEL

When control panel switch damaged. Using multi-meter to measure

voltage of control panel. Reconnect control panel. Make sure that

control panel is connected to the correct housing.

If problem persists, replace a new control panel.

LCD FORMAT

When power on, the scale shows non-complete segments. Please check

the LCD pin (please refer to above LCD format). Check whether LCD

pins are soldered properly or not.

Otros manuales para AW-300P

Tabla de contenidos

Otros manuales de Escala de Yamato

Yamato

Yamato PPC-200 Manual de usuario

Yamato

Yamato PPC-101 Manual de usuario

Yamato

Yamato DKS-3002 Manual de usuario

Yamato

Yamato DP-6700 Manual de usuario

Yamato

Yamato DP-6200 Manual de usuario

Yamato

Yamato DP-5602 Manual de usuario

Yamato

Yamato DP-6900 Manual de usuario

Yamato

Yamato AW-WPS Manual de usuario

Yamato

Yamato DSR-200 Manual de usuario

Yamato

Yamato AW-WLG Series Manual de usuario

Yamato

Yamato CPC-2000 Manual de usuario

Yamato

Yamato AW-WPS Manual de usuario

Yamato

Yamato CPS series Manual de usuario

Yamato

Yamato DP-6200 Manual de usuario

Yamato

Yamato PPC-300WP Manual de usuario

Yamato

Yamato Just NAVI J-101W Manual de usuario

Yamato

Yamato AW-300P Manual de usuario

Yamato

Yamato DP-6100GP Manual de usuario

Yamato

Yamato Acuu-Weigh SPC-2002 Manual de usuario

Yamato

Yamato DSY-1100 Manual de usuario

Yamato

Yamato PPC-300 Manual de usuario

Yamato

Yamato DP-6700 Manual de usuario

Yamato

Yamato Delicell Manual de usuario

Yamato

Yamato Accu-weigh PPC-200W Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario