Yamato AW-WLG Series Manual de usuario

Digital Portion Scale

AW-WLG Series

SERVICE MANUAL

PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE

STARTING TO USE THE SCALES

TABLE OF CONTENTS

SPECIFICATIONS ...................................................................................2

OVERLAY ...............................................................................................3

LCD DISPLAY.........................................................................................3

KEY FUNCTION DESCRIPTION:..........................................................4

USING AUTO TIME-OFF SETTING.......................................................5

CALIBRATION PROCEDURE................................................................6

INSTRUCTION AUTO SHUT-OFF FUNCTION.....................................7

POWER SUPPLY.....................................................................................8

INSTALLING THE BATTERY ................................................................8

CONTROL PANEL ..................................................................................9

LCD FORMAT .......................................................................................10

PART LISTS &ASSEMBLY DRAWING...............................................11

TROUBLE SHOOTING.........................................................................12

ERROR MESSAGE................................................................................13

SPECIFICATIONS

MODEL# AW-WLG15 AW-WLG30

Capacity

Division

0-6 kg x 0.002 kg

5-15 kg x 0.005 kg

0-15 kg x 0.005 kg

15-30 kg x 0.01 kg

Units of Measure kg, lb

Function keys ON/OFF, HOLD, UNIT,

TARE/BACKLIGHT

Stabilisation Time 1-2 seconds

Operating Temp. and

humidity

5°C - 35°C

40%-95% RH

Transport and storage

temperature and humidity

-20°C +60°C

25%-95% RH

Power supply 4 x AA size Alkaline cells

120 VAC 60Hz to15 VDC 300 mA wall

plug-in UL/CSA listed power supply

Indicator display 1.0 inch backlit LCD, 5 Digit with fraction

Dimensions 11.22" W x 10.03" D x 3.54" H

(285mm x 255mm x 90mm)

Platform Size 9.44" W x 7.28" D

(240mm x 185mm)

OVERLAY

LCD DISPLAY

1. : Stable symbol

2. : Minor weight value

3. : Indicates scale is at center of zero

4. : Low battery indication

KEY FUNCTION DESCRIPTION:

1. ON/OFF:

1. Turn on the scale by pressing the ON/OFF key.

2. The display will count down from 88888 and will automatically

display zero (weighing mode).

3. Place the item in the middle of the scale. Wait until the scale

stabilizes and stable enunciator illuminates on the display.

2. UNIT:

Press the UNIT key to switch from one weighing unit to another.

For example from kg to lb, oz, lb/oz, lb/oz 1/8.

3. HOLD

a. Press once to hold the displayed weight.

b. Press again to return display to normal weighing mode.

4. TARE:

a. Press to reset the display to zero up to 100% of the scale

capacity.

b. Press to confirm the setting for each menu.

c. Setting backlight function ON or OFF.

5. UNIT:

a. Press to change the weighing units to the alternate units of

measurement (if selected during configuration of the scale).

b. Press 6 times while holding ON/OFF key to enter Configuration

mode.

c. Press to select menu in the Configuration mode.

USING AUTO TIME-OFF SETTING

Switch ON the scale and long press UNIT key for 3 seconds, first

“SETUP” and then “A.OFF” will display successively.

AUTO-OFF TIME SETUP

This enables operator to select the auto turn OFF time of the device.

Auto off time: 120 sec/180 sec/240 sec/300 sec/off

BUZZER ON/OFF SETUP

This enables operator to select beep sound ON/OFF.

Buzzer: On/Off

Note: To confirm the settings, please press TARE when

displays on the display.

UNIT: select

TARE: confirm

UNIT (3secs)

*software version

CALIBRATION PROCEDURE

Operation Display

1. Place the scale on a hard, level surface.

2. Don’t press ON/OFF key,

3. Press and hold ON/OFF, and then press

UNIT key three times. To enter into

calibration procedure.

4. Display will show the zero value.

5. Then press the key.

6. Place the calibration weight (10kg)

carefully in the centre of the scale plate,

and the display will show SPAN Count

value (4000-80000).

7. Press the key. The adjustment

process is started.

8. When the adjustment is finished

successfully, the scale is automatically

switched over to the weighing mode

again and the calibration weight value

will be displayed.

9. Remove the calibration weight.

Re-power on, the instrument is in normal

mode.

INSTRUCTION AUTO SHUT-OFF FUNCTION

Define

Select

Press UNIT

key 3 sec

POWER SUPPLY

To apply power to the scale

using the supplied 15VDC, 300

mA power supply, insert the

plug from the power supply

cable into the power jack on the

back of the scale and then plug power supply into the proper electrical

outlet. The scale is now ready for operation.

INSTALLING THE BATTERY

The scale can use four (4) AAsize batteries (not included). If you wish

to operate the scale from batteries, you must first obtain and install the

batteries. Access is via a removable cover on the bottom of the scale.

Battery Installation/Replacement

1. Turn scale over so that display is facing down and place it upside down

on a flat level surface, such as a table or bench.

2. Locate battery cover on bottom of scale and turn locking tabs

counterclockwise.

3. Remove battery cover (lift straight up and slide it out) exposing battery

holder.

4. If installing new batteries, proceed to step 5. If replacing batteries,

–

Cov

remove all 4 batteries from battery holder and then proceed to step 5.

5. Install 4 new "AA" size batteries in battery holder, noting polarity

markings as shown above.

6. After placing all 4 batteries in holder, replace battery cover on scale.

Slide tabs on battery cover into slots at back of opening, press down on

cover and turn locking tabs clockwise.

7. Turn scale over (display facing up) and press ON/OFF key.

If display turns on, batteries have been installed correctly.

If not, remove battery cover and check for one or more

improperly positioned batteries.

CONTROL PANEL

When control panel switch damaged. Using multi-meter to measure

voltage of control panel. Reconnect control panel. Make sure that

control panel is connected to the correct housing.

If problem persists, replace a new control panel.

Otros manuales para AW-WLG Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escala de Yamato

Yamato

Yamato DP-6700 Manual de usuario

Yamato

Yamato BC-10 Manual de usuario

Yamato

Yamato DP-6200 Manual de usuario

Yamato

Yamato AW-300P Manual de usuario

Yamato

Yamato UDS-1V-WP Manual de usuario

Yamato

Yamato Accu-weigh PPC-200 Manual de usuario

Yamato

Yamato DP-8100 Manual de usuario

Yamato

Yamato DP-6200 Manual de usuario

Yamato

Yamato SPC Series Manual de usuario

Yamato

Yamato PPC-200W Manual de usuario

Yamato

Yamato Clock MINI DF301 Manual de usuario

Yamato

Yamato CPC-2000 Manual de usuario

Yamato

Yamato BC-10 Manual de usuario

Yamato

Yamato DP-6700 Manual de usuario

Yamato

Yamato PB-200 Manual de usuario

Yamato

Yamato AW-WPS Manual de usuario

Yamato

Yamato DSR-400 Manual de usuario

Yamato

Yamato AW-WLG Series Manual de usuario

Yamato

Yamato PPC-200 Manual de usuario

Yamato

Yamato PPC-300 Manual de usuario

Yamato

Yamato DP-6900 Manual de usuario

Yamato

Yamato Delicell Manual de usuario

Yamato

Yamato PLS Series Manual de usuario

Yamato

Yamato DP-6200 Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario