Yaesu FTM-400XDR Manual de usuario
These Field Guides are for the
sole purpose of a quick reference
of the radios features that are not
generally used on a daily basis. If you
would like more information that is not
contained in these Field guides, PLEASE
don’t hesitate to send us a message
requesting the information.
You can also check out our website
at the link below for more information.
73,
KA6ETE-Back Country Ham
Websites:
www.backcountryham.com
www.ka6ete.com
Contact us at:
or
Turning on
APRS
Step 1. Tune band “B” to the APRS
frequency. (U.S.A. & Canada-144.390)
Step 2. Long press DISP/Setup button
Step 3. Press APRS
Step 4. Turn on Option 5 (APRS Modem)
and option 6 (APRS Mute *optional*).
Then exit to main display.
Step 5. Make sure the beacon is set to
desired type. This can be changed by
pressing the F/MW button followed by
the BEACON button. Filled in circle
indicates Auto Beacon. Empty Circle
indicates Smart Beacon.
Turning on
Cross Band Repeater
Step 1. Tune both “A” and “B” band to
desired frequencies. (Must be VHF
à
UHF
or UHF
à
VHF)
Step 2. Turn Radio Off
Step 3. While Pressing the GM, F/MW
and DISP/SETUP buttons power the radio
on.
To turn the Cross Band Repeater off follow
steps 2 and 3.
The purpose of this Field Guide is
intended for a quick reference guide
for the features most needed in the
field but not used on a daily basis.
You should familiarize yourself with
your radio prior to heading into the
Back Country. You can view
instructional videos on all features
outlined in this Field Guide on our
website at
www.backcountryham.com or
www.ka6ete.com
Programming
A Repeater
Step 1. Put the radio in VFO mode, this is
done by pressing the V/M button located
in the Function Menu.
Step 2. Enter the input frequency of the
repeater.
Step 3. Set the repeater shift direction.
(long press DISP/SetupàConfigàoption
5)
Step 4. Set the tone frequency
(long press
DISP/SetupàSignalingàoption 1)
Step 5. Set tone type
Press F/MW àSQL. Tap SQL until desired
tone type is displayed.
The radio is now set to transmit on the
repeater.
To save the Repeater into memory:
Step 1. Long press the F/MW button.
Step 2. Using top right VFO knob select
memory location.
Step 3. Long Press highlighted location to
enter name.
Step 4. Tap memory location to Confirm
to memory.
Step 5. Press Menu item 16 “Digi Path
Select” and select “Wide 1-1, Wide2-1”
Step 6. Press “Back Button”
Step 7. Press Menu item 23 “APRS Call
Sign”. Enter your FCC issued call sign
along with the appropriate SSID #.
Step 8. Press Option 26 and select “GPS”
Step 9. Press Menu item 30 “Smart
Beaconing” and select “Type 1”
Step 10. Press the “Back Button”
Now follow the steps outlined in
“Turning on APRS”
APRS
Settings
Step 1. Long press DISP/Setup
Step 2. Press APRS
Step 3. Menu item 14 “Beacon Status
Text”. Press and then select “Text 1”
followed by pressing Freq & Sql &
Shift. Enter additional information if
desired followed by the “ENT’ button.
Step 4. Press the “Back” button
Otros manuales para FTM-400XDR
4
Otros manuales de Radio de Yaesu
Yaesu
Yaesu FTA-250L Manual
Yaesu
Yaesu FTC-2003 Manual de usuario
Yaesu
Yaesu FT-911 Manual de usuario
Yaesu
Yaesu FT-470 Manual de usuario
Yaesu
Yaesu FT-411 MKII Manual
Yaesu
Yaesu FT-23R MKII Manual
Yaesu
Yaesu FT-23R MKII Manual
Yaesu
Yaesu FT-100D Manual de usuario
Yaesu
Yaesu FTC-2003 Manual de usuario
Yaesu
Yaesu FTDX101MP Manual de usuario
Yaesu
Yaesu FTM-400 Manual
Yaesu
Yaesu FT1DE Manual de usuario
Yaesu
Yaesu FT-991A Manual de usuario
Yaesu
Yaesu FRG-7700 Manual de usuario
Yaesu
Yaesu FT-530 Manual
Yaesu
Yaesu FV-301 Manual de usuario
Yaesu
Yaesu FTM-400DE Manual de usuario
Yaesu
Yaesu FTM-10R Instrucciones de funcionamiento
Yaesu
Yaesu FT-65R Manual de usuario
Yaesu
Yaesu FR-101 Manual de usuario
