Yaesu FTM-400 Manual

V1.0 22/07/2019 KB

Configure the Yaesu FTM-400 for GB7MT Technical

Information

Yaesu UK Limited

Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB

1) Please make sure that your callsign has been entered in your radio. If not, please refer the Operator Manual.

2) Enter the output frequency of GB7MT 439.6625MHz

Make sure the radio is in VFO mode

.

Touch to toggle between VFO and

Memory mode.

Press

The function menu will be displayed.

Touch

The number input screen will be displayed.

V1.0 22/07/2019 KB

Configure the Yaesu FTM-400 for GB7MT Technical

Information

Yaesu UK Limited

Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB

Touch the numbers

[4] [3] [9] [6] [6] [2]

The Frequency 439.66250 will be displayed

on the screen.

Press to hide the function menu.

3) Set the mode to C4FM.

Press the button until above the

mode indication is displayed. This will put

the radio is AMS mode, the radio will

automatically switch between DN, VW or

FM.

4) Setup the repeater shift frequency

Press for one second or longer.

The Setup Menu will be displayed.

Touch CONFIG

V1.0 22/07/2019 KB

Configure the Yaesu FTM-400 for GB7MT Technical

Information

Yaesu UK Limited

Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB

Turn to select [5 RPT SHIFT]

Touch [5 RPT SHIFT] until – is displayed

Turn to select [6 RPT SHIFT FREQ]

Touch [6 RPT SHIFT FREQ] so that the current

repeater shift frequency is highlighted in

yellow.

Turn until the repeater shift frequency is

9.00 MHz.

Touch three times until the radio is

back at the main frequency display.

5) Store the repeater frequencies into a memory channel.

Press for one second or longer.

The memory writing screen will be displayed.

The frequency will be automatically displayed

in the next empty memory channel.

Turn to select a different memory

channel if desired.

Press to save the data to memory.

If you wish to name the memory channel

please refer to Page 70 Steps 1 to 11 in

“Naming the memory” in the operating

manual.

V1.0 22/07/2019 KB

Configure the Yaesu FTM-400 for GB7MT Technical

Information

Yaesu UK Limited

Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB

Press to save the data to memory.

When the memory writing is completed the

frequency and memory channel number will

be shown in the display.

Touch to toggle between VFO and

Memory mode.

Tabla de contenidos

Otros manuales de Radio de Yaesu

Manuales populares de Radio de otras marcas

EisSound

EisSound KBSound iSelect Manual de usuario

Midland

Midland 1001LWX Manual de usuario

Konig

Konig HAV-SR41 Manual de usuario

Roberts

Roberts exprssion Manual de usuario

VDigi

VDigi DD3.0 Manual de usuario

Radio Shack

Radio Shack 21-1863 Manual de usuario

Roberts

Roberts Stream 207 Manual de usuario

Sony

Sony Walkman SRF-M97 Manual de usuario

Stanley

Stanley FatMax FMC770 Manual de usuario

auna

auna DAB-Radio 10026947 Manual de usuario

SOUNDMASTER

SOUNDMASTER UR190 Manual de usuario

HYT

HYT TC-320 Manual de usuario

auna multimedia

auna multimedia Yellowstone 10026851 Manual de usuario

B-Tech

B-Tech GMRS-V2 Manual de usuario

Weierwei

Weierwei VEV-V8 Manual de usuario

SOUNDMASTER

SOUNDMASTER DAB750 Manual de usuario

Telefunken

Telefunken TF-1505 Manual de usuario

Makita

Makita LXRM03 Manual de usuario