Xiamen HT300 Manual de usuario
Label Printer
User Manual
HT300
HT330
Xiamen Hanin Electronic Technology Co.,Ltd
ADD:
Room 305A,Angye Building,Pioneering Park,
Torch High-tech Zone,Xiamen,China.
Tel.:
+86-(0)592-5885993
Fax:
+86-(0)592-5885992
Web:
www.hprt.com
Contents
Manual Information........................................................................................................................ 1
Important Safety Instructions......................................................................................................... 2
Chapter 1 Introduction................................................................................................................... 5
1.1 Packing List.........................................................................................................................5
1.2 Appearance and Components........................................................................................... 6
1.3 Dimension.......................................................................................................................... 8
Chapter 2 Specifications................................................................................................................. 9
Chapter 3 Installation & Usage..................................................................................................... 11
3.1 Media Loading................................................................................................................. 11
3.2 Power Connection............................................................................................................16
3.3 Peripherals Connection....................................................................................................17
3.4 Detection..........................................................................................................................18
3.5 Operation Panel............................................................................................................... 27
3.6 Basic Operation................................................................................................................ 29
Chapter 4 Interface....................................................................................................................... 31
4.1 USB Interface................................................................................................................... 31
4.2 Other Optional Interfaces................................................................................................ 32
Chapter 5 Maintenance & Adjustment.........................................................................................34
5.1 Cleaning Media Sensor.................................................................................................... 34
5.2 Cleaning Thermal Print Head........................................................................................... 34
5.3 Cleaning Roller and/or Paper Path...................................................................................35
Chapter 6 Label Printer Utility Instructions.................................................................................. 36
6.1 Installation Preparation................................................................................................... 36
6.2 Usage................................................................................................................................36
Chapter 7 Seagull Windows Driver Instructions........................................................................... 46
7.1 Introduction..................................................................................................................... 46
7.2 Installation Preparation................................................................................................... 46
7.3 Installation....................................................................................................................... 47
7.4 Usage................................................................................................................................52
7.5 Label’s Width....................................................................................................................68
Chapter 8 BarTender® Ultralite Instructions.................................................................................69
8.1 Introduction..................................................................................................................... 69
8.2 Installation Preparation................................................................................................... 69
8.3 Installation....................................................................................................................... 70
8.4 Usage................................................................................................................................74
HT300/HT330 User Manual
Statement
This manual content may be altered without permission, and our company reserves the rights
to make changes without notice in technology, spare parts, hardware and software of the
products. If more information is needed about the products, please contact our company.
Without any written permission from our company, any section of this manual is prohibited to
be copied or transferred in any form.
Copyright
This manual is printed in 2016, the copyright belongs to Xiamen Hanin Electronic Technology
Co. Ltd.
Printed in China
1.0 Version
Warnings
This must be complied with in order to avoid any damage to the human body and the
equipment.
This is showing the important information and tips for the printer operation.
Note: Due to continuous update of our product, the description of printer specification,
accessories, design in this manual may be slightly different. Please keep in kind prevail.
1
Manual Information
This user manual contains basic information for product usage as well as for emergency
measures that may be required.
The installation and usage of printer driver, utility tool and HPRT BarTender® Ultralite are also
included in the manual.
HT300/HT330 User Manual
2
Important Safety Instructions
Before using the present appliance, please carefully read the following safety regulations in
order to prevent any hazard or material damage.
1.Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the
print head after printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the
printer head.
2.Instructions
Warnings: Violating following instructions may cause serious injury or death.
1) Do not plug several products in one multiperture outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multiperture outlet.
2) You must use the supplied adapter.
• It is dangerous to use other adapters.
3) Do not pull the cable to unplug.
• This may damage the cable, which is the origin of a fire or a breakdown of the printer.
4) Do not plug in or unplug with your wet hands .
• You may be electrocuted.
5) Do not bend the cable by force or leave it under any heavy object.
• A damaged cable may cause a fire.
HT300/HT330 User Manual
3
Caution: Violating following instructions may cause slight damage of the appliance.
1) If you observe a strange smoke, odour or noise from the printer, unplug it before taking
following measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to repair it.
2) Install the printer on the stable surface.
• If the printer falls down, it may be broken and you may hurt yourself.
3) Use the approved accessories only and do not try to disassemble, repair or remodel it by
yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
4) Do not let water or other foreign objects drop into the printer.
• If this happened, switch off and unplug the printer before calling your dealer.
5) Do not use the printer when it is out of order. This can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
6) Other considerations:
• Place the printer on a solid and even base so that it cannot fall.
• Leave enough space around printer for operation and maintenance.
• Keep all liquids away from the printer.
• Do not expose the printer to high temperatures, direct sunlight or dust.
• Ensure the printer is connected to a socket with the correct mains voltage.
• Switch off the printer POWER supply when it’s not in use for a long time.
• To ensure the printing quality and reliability, suggest use the same quality or recommend
paper supplier.
• Pls. switch off the POWER supply when connect/disconnect all the ports or it will cause
damage to the printer control circuit.
• Never carry out maintenance or repair work yourself. Always contact a qualified service
Technician.
HT300/HT330 User Manual
4
• Keep this User Manual in a place which is easily accessible at all times.
3.Other Precautions
The copyright for this user manual and various other manuals is property of our company. Any
copying or conversion into electronic form and saving of this material without the express
written permission is strictly prohibited. Use of the information contained in this manual is not
subject to any patent liability. This manual has been prepared with utmost care and attention
to detail but may contain certain errors and/or omissions. Our company is not legally liable for
any damages resulting from the use of the information in this manual. Our company and its
affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or
expenses that result from the breakdown, malfunction, and/or misuse of the product due to
violation or neglect of the operation and maintenance information and instructions provided
by our company, as well as from the unauthorized alteration, repair, and/or modification of the
product by the user and/or third party. We are not legally liable for any damages and/or issues
resulting from the use of options and/or parts that are not authentic or authorized products.
4.WEEE (Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the corresponding
item should not be discarded at the end of its working life with other household
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate marked items from other types of
waste and recycle them responsibly to promote the sustained reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office for details of where and how they can conduct environmentally safe
recycling of such items. Commercial users should contact their suppliers and check the terms
and conditions of purchase contracts. This product should not be combined with other
commercial waste for disposal.
Caution: This is a Class A product. In a domestic environment this product may cause
radio interference in which the user may be required to take adequate measures.
HT300/HT330 User Manual
Rev.1.0
5
Chapter 1 Introduction
1.1 Packing List
Note:
1.Unpack the printer and keep the packing materials in case you need to ship the printer in the
future.
2.Any damages exist, please contact the local dealer.
Printer AC Adapter Power Cord
USB Cable Empty Ribbon Core Ribbon
Label Supply Spindle Label Supply Plates Ribbon Spindles
Label Roll CD Quick Start Guide
Note：The packing materials are actually based on the order.
HT300/HT330 User Manual
Rev.1.0
6
1.2 Appearance and Components
￭Front View
￭Rear View
HT300/HT330 User Manual
Rev.1.0
7
￭Inside View
Note：The views above are for your reference. Ports vary by your choice.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Etiquetadora de Xiamen
