Xerox Phaser 790DP Manual de usuario
Phaser 790
Getting Started
The Document Company
XEROX
©2000 Xerox Corporation. All rights reserved.
Copyright protection claimed includes all forms and matters of
copyrightable material and information now allowed by statutory or
judicial law or hereinafter granted, including without limitation, material
generated from the software programs that are displayed on the
screen such as styles, templates, icons, screen displays, looks, etc.
Xerox®, The Document Company®, the digital X®, and all Xerox product
names and product numbers mentioned in this publication are
registered trademarks of Xerox Corporation. Xerox Canada is a
licensee of all the trademarks. Other company brands and product
names may be trademarks or registered trademarks of their respective
companies and are also acknowledged.
Changes are periodically made to this document. Technical updates
will be included in subsequent editions.
Printed in the United States of America.
Xerox Phaser 790 Getting Started iii
Safety Notes, Compliances
Certifications, and other notices
Xerox Corporation reserves the right to change this information without
notice, and makes no warranty, express or implied, with respect to this
information. Xerox shall not be liable for any loss or damage, including
consequential or special damages, resulting from the use of this information,
even if loss or damage is caused by Xerox negligence or other fault.
Safety Notes
Your Phaser 790 and its supplies have been designed and tested to meet
strict safety requirements. These include safety agency examination and
approval, and compliance with established environmental standards. Please
read the following instructions carefully before operating the Phaser 790.
Failure to follow the recommendations in this section may result in personal
injury or rescinding of the machine maintenance agreement.
WARNING
An improper connection to the Phaser 790 grounding conductor can result in
electrical shock. Always connect the copier to a properly grounded wall
outlet. If in doubt, have the outlet checked by a qualified electrician.
Never use an extension cord between the copier power cord and an electrical
outlet.
Do not allow anything to rest on the power cord.
Do not place the Phaser 790 where people may step on the power cord.
Follow all warnings and instructions that are marked on or supplied with the
Phaser 790.
Never override or "cheat" electrical or mechanical interlock devices.
Always locate the Phaser 790 on a solid support surface with adequate
strength for the weight of the copier.
Do not use the Phaser 790 near water, wet locations, or outdoors.
Safety Notes, Compliances, Certifications, and other notices
Xerox Phaser 790 Getting Started
iv
Never push objects of any kind into the slots in the covers, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or
electric shock.
The Phaser 790 is designed to prevent user access to unsafe areas and to
ensure that the device will not operate with the covers opened. Never attempt
any maintenance function that is not specified in the Xerox Phaser 790 User
Information.
Never remove any covers or guards that require a tool for removal, unless
you are instructed to do so. Ensure that you read all Warnings and Cautions,
and follow each step in the instructions exactly as they are written.
Never attempt any activity that is not specified in the Xerox Phaser 790 User
Information, or on the User Interface, or that is not specifically directed by an
authorized Xerox Representative.
Do not look directly at the exposure lamps. The exposure lamps are not
harmful but they are very bright and may cause discomfort. It is
recommended that the Document Handler be closed when the Phaser 790 is
in use.
Never operate the Phaser 790 if unusual noises or odors are detected.
Disconnect the power cord from the wall outlet and call Xerox Service to
correct any problems.
Maintenance Safety
Refer to these instructions as needed in order to ensure the safe operation
of the Printer Copier.
Always use materials that are supplied or approved by Xerox. Use of other
materials may result in poor performance and could create a hazardous
situation.
Do not use aerosol cleaners. Follow the instructions in the Xerox Phaser 790
User Information for the appropriate cleaning methods.
Never use supplies or cleaning materials for purposes other than what they
were intended. Keep all supplies and cleaning materials out of the reach of
children.
Never place coffee or other liquids on the copier.
Never spill liquid of any kind on the copier.
The Phaser 790 is equipped with an energy-saving device to conserve power
when the machine is not in use.
Safety Notes, Compliances, Certifications, and other notices
Xerox Phaser 790 Getting Started v
Unplug the Phaser 790 from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
•When the power cord is damaged or frayed
•If liquid has been spilled into the Phaser 790
•If the Phaser 790 has been exposed to rain or water
•If the Phaser 790 is producing unusual noises or odors
If the system does not work or continues to malfunction after following the
Problem Solving procedures in the Xerox Phaser 790 User Information, call
your local Xerox Service Representative.
For additional safety information concerning the Phaser 790 or Xerox
supplied materials, call the following toll-free number:
1-800-828-6571
Ozone Safety
The Phaser 790 produces ozone during normal operation. The ozone
produced is heavier than air, and the quantity is dependent on the copy/print
volume. Providing the correct environmental parameters, as specified in
Xerox installation procedures, ensures that the concentration levels meet safe
limits for Ozone depleting substances per the US Clean Air Act (1990) and
the 1987 Montreal Protocols.
If additional information concerning ozone is needed, request the Xerox
publication, Ozone, 600P83222, by:
•Calling 1-800-828-6571
•Contacting your local Xerox representative
Laser Safety
Using the controls or adjustments, or performing any procedures other than
those specified herein, may result in a hazardous exposure to laser radiation
exposure.
This equipment complies with safety standards. With specific regard to laser
safety, the equipment complies with performance standards for laser products
set by government agencies as a Class I laser product and does not emit
hazardous lights, the beam is totally enclosed during all modes of customer
operation and maintenance.
.
Safety Notes, Compliances, Certifications, and other notices
Xerox Phaser 790 Getting Started
vi
Safety Notes
FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense
Changes or modifications to this equipment not specifically approved
by the Xerox Corporation may void the user’s authority to operate this
equipment.
Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
European Union
The CE marking applied to this product symbolises XEROX Limited
Declaration of Conformity with the following applicable Directives of the
European Union as of the dates indicated:
January 1, 1995:
Council Directive 73/23/EEC amended by Council Directive
93/68/EEC, approximation of the laws of the member states related to
low voltage equipment.
Safety Notes, Compliances, Certifications, and other notices
Xerox Phaser 790 Getting Started vii
January 1, 1996:
Council Directive 89/336/EEC, approximation of the laws of the
member states related to electromagnetic compatibility.
A full declaration, defining the relevant directives and referenced
standards can be obtained from your XEROX Limited representative or
by contacting:
•Environment, Health and Safety,
•XEROX Limited,
•PO Box 17,
•Bessemer Road,
•Welwyn Garden City,
•Hertfordshire
•AL7 1HE
•ENGLAND.
•Tel Number +44 (0) 1707 353434
WARNING
This product is certified manufactured and tested in compliance with strict
safety and radio frequency interference regulations. Any unauthorized
alteration which, includes the addition of new functions or the connection of
external devices, may impact this certification. Please contact your local
XEROX Limited representative for a list of approved accessories.
WARNING
In order to allow this equipment to operate in proximity to Industrial, Scientific
and Medical (ISM) equipment, the external radiation from the ISM equipment
may have to be limited or special mitigation measures taken.
Safety Notes, Compliances, Certifications, and other notices
Xerox Phaser 790 Getting Started
viii
WARNING
This is a Class B product. In a domestic environment this product may
cause radio frequency interference in which case the user may be required
to take adequate measures.
Changes or modifications to this equipment not specifically approved by Fuji
Xerox Australia Limited may void the user’s authority to operate this
equipment.
Shielded cables must be used with this equipment to maintain compliance
with the Radio Communications Act of 1992.
Documentation conventions
The following conventions are used through out the customer documentation.
WARNING
Warnings alert you to operations that could cause personal injury.
CAUTION
Cautions alert you to operations that may cause damage to the machine.
Notes contain additional information, explanations, and helpful suggestions.
Keypoints provide techniques or shortcuts.
Xerox Phaser 790 Getting Started xi
Table of contents
1. Setting up the Phaser 790.....................................................................................1-1
Preparing for the installation .....................................................................................1-1
Selecting a location ..............................................................................................1-1
Space requirements ..............................................................................................1-2
Checking the installation components................................................................1-3
Setting up the Printer Cabinet...................................................................................1-5
Installing the 2 Tray Module......................................................................................1-9
Unpacking the Printer..............................................................................................1-13
Installing the Phaser 790 on the Printer Cabinet only..........................................1-16
Installing the Phaser 790 on the 2 Tray Module only...........................................1-18
Printer installation ...................................................................................................1-25
Loading paper in the paper tray..............................................................................1-41
Switching on the power...........................................................................................1-45
Switching off the power...........................................................................................1-45
Printing a test page.................................................................................................1-47
Adding memory to the Printer .................................................................................1-49
2. Getting to know the Phaser 790 ............................................................................2-1
Printer, Front View....................................................................................................2-1
Printer, Rear View.....................................................................................................2-2
Printer, Internal View.................................................................................................2-3
Printer Control Panel.............................................................................................2-4
Accessories...............................................................................................................2-5
Accessories ordering information ..........................................................................2-5
Supply reorder numbers........................................................................................2-6
USA and Canada...............................................................................................2-6
Europe...............................................................................................................2-6
Table of contents User Documentation
Xerox Phaser 790 Getting Started
xii
3. Network Setup .......................................................................................................3-1
Installing the Token Ring Network card.....................................................................3-1
Windows 95/98 .........................................................................................................3-5
Before you begin ...................................................................................................3-5
Installing the print driver .......................................................................................3-5
Windows 2000 ..........................................................................................................3-7
Before you begin ...................................................................................................3-7
Installing the print driver .......................................................................................3-7
Windows NT 4.0........................................................................................................3-9
Before you begin ...................................................................................................3-9
Installing the print driver .......................................................................................3-9
Macintosh OS .........................................................................................................3-11
Before you begin .................................................................................................3-11
Installing the print driver .....................................................................................3-11
Setting up the Phaser 790 Chooser ....................................................................3-11
Otros manuales para Phaser 790DP
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Impresora de Xerox
Xerox
Xerox Phaser 4510 Manual de funcionamiento
Xerox
Xerox Phaser 6180 Manual de funcionamiento
Xerox
Xerox DocuPrint 4512 Manual de usuario
Xerox
Xerox DocuPrint P8EX Manual de usuario
Xerox
Xerox DocuPrint 180 Manual de usuario
Xerox
Xerox WorkCentre XD125F Manual de usuario
Xerox
Xerox DocuPrint P14 Manual de usuario
Xerox
Xerox ColorQube 8580 Series Manual de funcionamiento
Xerox
Xerox Phaser 3450 Manual de usuario
Xerox
Xerox Phaser 6300 Guía de instalación y uso
Xerox
Xerox Phaser 3450 Manual de usuario
Xerox
Xerox VersaLink C620 Manual de usuario
Xerox
Xerox Phaser EX7750 Guía de configuración
Xerox
Xerox Phaser 6110N Manual de usuario
Xerox
Xerox B230 Manual de usuario
Xerox
Xerox 3124 - Phaser B/W Laser Printer Manual de usuario
Xerox
Xerox DocuPrint 180 Manual de usuario
Xerox
Xerox WorkCentre XD130DF Manual de usuario
Xerox
Xerox DocuPrint 900 Manual de usuario
Xerox
Xerox Phaser 3250 Manual de usuario
