Xerox 4215/MRP Manual de servicio

XEROX

Xerox MRP Family

4215/MRP, 4219/MRP, 4220/MRP, 4230/MRP

PCL 5 and PostScript

Printer Language Reference

March 1995

721P81072

Xerox Corporation

701 S. Aviation Boulevard

El Segundo, CA 90245

copyrightable material and information now allowed by statutory

or judicial law or hereinafter granted, including without limitation,

material generated from the software programs which are

displayed on the screen, such as icons, screen displays, looks,

etc.

Printed in the United States of America

Publication number: 721P81072

Xerox® and all Xerox products mentioned in this publication are

trademarks of Xerox Corporation. Products and trademarks of

other companies are also acknowledged.

Changes are periodically made to this document. Changes,

technical inaccuracies, and typographic errors will be corrected in

subsequent editions.

This document was created on the Xerox 6085 Professional

Computer System using VP software. The typeface is Optima.

Notices

Installation caution

Your Xerox laser printer is not customer installable. Only a

qualified service representative should install the equipment.

Safety

CAUTION: This equipment generates, uses, and can radiate

radio frequency energy, and if not installed and used in

accordance with the installation requirements, may cause radio

interference to radio communications.

U.S.A.

Your printer has been tested and found to comply with the limits

for a Class A computing device pursuant to Subpart J of Part 15

of FCC rules, which are designed to provide reasonable

protection against such interference when operated in a

commercial environment. Operation of this equipment in a

residential area is likely to cause interference. In such cases, the

user at his or her own expense is required to correct the

interference.

Canada

This digital apparatus does not exceed the Class A limits for radio

noise emissions from digital apparatus as set out in the radio

interference regulations of the Canadian department of

communications.

Les present appareil numerique n’emet pas de bruits

radioelectriques depassant les limites applicables aux appareils de

Classe A prescitees dans le reglement sur le brouillage

radioelectrique edicte par les ministre des communications du

Canada.

Europe: 50 Hz, 220 to 240 V equipment

This equipment has been tested and certified in conformance

with European commission directive 82/499/ECC and VDE

0871/0875, Class A, relating to radio frequency interference.

XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE iii

NOTICES

Laser safety

Your printer complies with appropriate safety standards.

Specifically regarding lasers, the equipment complies with laser

product performance standards set by governmental,

international and national agencies as a Class 1 laser product. It

does not emit hazardous light; the beam is totally enclosed

during all phases of customer operation and maintenance.

WARNING: Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

Be aware of all labels that warn you against removing panels or

covers. See the example below of a label located behind the

front cover, below the on/off switch.

DANGER - Invisible laser radiation

when open and interlock

defeated for service.

AVOID DIRECT EXPOSURE TO

BEAM

Instructions for safe service are

in SERVICE MANUAL.

These laser warning labels are placed on panels that cover areas

that are not operator serviceable. These panels are not to be

removed.

Operational safety

Your Xerox equipment and supplies are designed and tested to

meet strict safety requirements. These include safety agency

examination, approval, and compliance with established

environmental standards.

Attention to the following notes ensures the continued safe

operation of your equipment.

Do this

Always connect equipment to a properly grounded power source

receptacle. If in doubt, have the receptacle checked by a

qualified electrician.

WARNING: Improper connection of the equipment grounding

conductor can result in electrical shock.

Always place equipment on a floor with adequate strength for

the weight of the machine.

Always have your qualified service representative move or

relocate the equipment.

Always use materials and supplies specifically designed for your

Xerox equipment.

iv XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE

NOTICES

WARNING: Use of unsuitable materials may result in poor

performance and can possibly create a hazardous condition.

Always use a Xerox specified cordset with the Equipment Leakage

Circuit Interrupter/Residual Current Device (ELCI/RCD).

Use caution when installing or modifying telephone lines.

Do not do this

Never use an extension cord with the ELCI/RCD.

Never use the ELCI/RCD where water may enter the casing.

Never attempt any maintenance function that is not specifically

described in this document.

Never remove any covers or guards that are fastened with screws

unless otherwise instructed. There are no operator-serviceable

areas within these covers.

Never override or “cheat” electrical or mechanical devices.

Never operate the equipment if you notice unusual noises or

odors. Disconnect the power cord from the power source

receptacle and call Xerox service to correct the problem.

Never install telephone wiring during a lightening storm.

Never install telephone jacks in a wet location unless specifically

designated for wet locations.

Never touch uninsulated telephone wires or terminals unless the

telephone line has been disconnected at the network interface.

Avoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electrical shock

from lightening.

Never use a telephone to report a gas leak in the vicinity of the

leak.

U.S. only: If you need any additional safety information

concerning the equipment or Xerox supplied materials, call the

following toll-free number: 1-800-828-6571.

Approvals and certification

60 Hz, 115 V Listed by Underwriters Laboratories, UL1950 (UL). Meets CSA

standards, C22.2 NO 950 (CSA).

50 Hz, 220 to 240 V Meets the British Standards Institution, IEC950 (BSI).

Safety feature

Your printer equipped with an Equipment Leakage Circuit

Interrupter/Residual Current Device (ELCI/RCD). This safety

device protects you if an electric outlet supplying power to the

printer is improperly wired.

XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE v

NOTICES

U.S. configuration of ELCI/RCD

1 Window

2 Reset button

International configuration of ELCI/RCD

1 Window

2 Reset button

If power is interrupted to the printer, follow these steps:

1. Locate the safety device, using the U.S. or International

Configuration (above).

2. Check to see if a red flag displays in the window of the

safety device.

3. If the red flag does not display, press and release the black

Reset button.

The red flag displays and power is restored to the system.

If power is not restored by this procedure or if the device

interrupts power to the machine again, call your service

representative.

vi XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE

Table of contents

Notices iii

Installation caution iii

Safety iii

Laser safety iv

Operational safety iv

Introduction ix

About this manual ix

Text conventions ix

1. PostScript mode 1-1

Device-dependent features 1-1

Fonts available with the PostScript Language mode 1-1

Downloadable font types 1-2

Internal fonts 1-2

Adobe Type Manager fonts 1-3

Page Device setup 1-4

Page Device features 1-4

Resources 1-9

Compatibility operators 1-9

Miscellaneous PostScript features 1-9

2. HP LaserJet Emulation mode 2-1

HP PCL 5 compatibility 2-1

Job Control commands 2-2

Page Control commands 2-3

Image area 2-7

Fonts 2-7

Downloading fonts 2-7

Appendices A. HP PCL command quick reference A-1

B. HP-GL/2 command quick reference B-1

C. Related publications C-1

Index INDEX-1

XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE vii

Introduction

The Printer Language Reference is intended as an aid to

programmers using PostScript Page Description Language (PDL)

or Hewlett-Packard (HP) Printer Control Language (PCL) 5 to

write programs for a laser printer.

About this manual

This reference does not cover all aspects of HP PCL or PostScript

PDL.

Before using this manual, become familiar with its contents and

conventions.

Text conventions

The following text and procedure conventions are used

throughout this guide.

italics Italics are used for document and library names (for example, the

Xerox MRP Family 4220/MRP, 4230/MRP Operator Guide).

CAUTION: Cautions are associated with equipment safety.

WARNING: Warnings are associated with the safety of people.

NNotes: Hints that help you perform a task or understand the

text.

MB Megabyte.

K-byte Kilobyte.

K-bit Kilobit.

gsm Grams per one square meter of paper.

menus, modes, options, and commands These use downstyle capitalization (for example, Configuration

menu, Duplex mode, and Raster Graphics command).

XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE ix

Otros manuales para 4215/MRP

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Xerox

Xerox

Xerox DocuPrint N17 Manual

Xerox

Xerox 098N02176 - Network Kit Print Server Manual de usuario

Xerox

Xerox Phaser 3610 Manual de instrucciones

Xerox

Xerox 4890 Advanced Manual de usuario

Xerox

Xerox 8560/SDN - Phaser Color Solid Ink Printer Manual de usuario

Xerox

Xerox Phaser 6360 Manual de usuario

Xerox

Xerox Phaser 8860 Manual de funcionamiento

Xerox

Xerox Phaser 5550 Manual de funcionamiento

Xerox

Xerox 7300DX - Phaser Color Laser Printer Manual de usuario

Xerox

Xerox Phaser 6180 Manual de funcionamiento

Xerox

Xerox Phaser 860 Manual de usuario

Xerox

Xerox Phaser 6120 Manual de usuario

Xerox

Xerox Phaser 6120 Manual de usuario

Xerox

Xerox Phaser 5500 series Manual de instrucciones

Xerox

Xerox Phaser 7400 Manual de usuario

Xerox

Xerox Document Centre ColorSeries 50 LP Instrucciones de uso

Xerox

Xerox CX PRINT SERVER 550 Manual

Xerox

Xerox Phaser 6180 Manual de usuario

Xerox

Xerox B210 Manual de usuario

Xerox

Xerox Nuvera 100 Manual técnico

Xerox

Xerox Phaser 840 Manual de usuario

Xerox

Xerox DocuPrint 4635 IPS Series Guía del administrador

Xerox

Xerox D95 Manual de usuario

Xerox

Xerox Phaser 6020 Manual de funcionamiento

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario