Xerox D95 Manual de usuario

Xerox®D95/D110/D125 Printer and

Copier/Printer

Xerox®Secure Access Installation Guide

Version 1.0

March 2012

702P00634

and Xerox SecureAccess Unified ID systems® are trademarks in the United States and/or other countries.

Equitrac®is a registered trademark of Equitrac Corporation.

BR1663

Table of Contents

Xerox Secure Access Installation Guide ..................................................1

Overview......................................................................................................................................1

Prerequisites...............................................................................................................................1

Installation.................................................................................................................................1

Connecting the USB card reader..........................................................................1

Configuring the machine to communicate with the USB card

reader........................................................................................................................2

Enabling the plug-in feature on the machine....................................2

Uploading the two Equitrac Provider plug-ins...................................2

Checking the status of the embedded plug-ins................................3

Deactivating the plug-ins........................................................................................3

Activating the plug-ins..............................................................................................4

Configuring the machine to use Xerox Secure Access for

authentication....................................................................................................................5

Enabling Xerox Secure Access settings..............................................................6

Disabling the USB card reader............................................................................................7

Deactivating the two Equitrac Provider plug-ins............................................7

Disabling the plug-in feature.................................................................................8

Disconnecting the USB card reader from the USB port on the

machine...................................................................................................................9

iii

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Table of Contents

Xerox Secure Access

Installation Guide

Overview

This document describes how to configure the Xerox Secure Access Unified ID System®

with a USB card reader. The USB card reader is connected directly to the USB port on

the Xerox machine. When the USB card reader is connected to the machine, a traditional

card reading device is no longer required.

Prerequisites

•Xerox Secure Access unified solution: Xerox Secure Access server software version

4.1.0.3287 or higher

•Equitrac®provider and libraries for USB card reader: EqXCPProvider,

LibforEqXCPProvider

•Support card and cards readers: Please see Xerox Secure Access documentation on

supported card and card readers

•Configuration: SSL (Secure Socket Layer) has to be enabled

Note

Extensible service setup has to be enabled if the EIP application is used.

Installation

Connecting the USB card reader

Two USB ports are located on the back of the Xerox machine. The two USB ports are

located next to each other.

Insert the USB connection from the card reader into the USB port on the right side.

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Configuring the machine to communicate with the USB card reader

Enabling the plug-in feature on the machine

1. Open an internet web browser.

2. Enter the IP address of the machine in the address field.

3. Press Enter to go to CentreWare®Internet Services.

4. Select the Properties tab.

5. If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

6. Select OK.

7. Select the Security folder.

8. In the Security folder, select Plug-in Settings.

9. In the Plug-In Settings folder, select Plug-in Settings in the directory tree.

10. In the Plug-in Settings area perform the following steps:

a) Check the Enabled checkbox for Plug-in Settings.

b) Select Apply.

A message is displayed stating that the machine must be rebooted before the

new settings can take effect.

11. Select Reboot Machine.

A message displays asking: Do you want to reboot?

12. Select OK.

Uploading the two Equitrac Provider plug-ins

1. Open an internet web browser.

2. Enter the IP address of the machine in the address field.

3. Press Enter to go to CentreWare®Internet Services.

4. Select the Properties tab.

5. If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

6. Select OK.

7. Select the Security folder.

8. In the Security folder, select Plug-in Settings.

9. In the Plug-in Settings folder, select List of Embedded Plug-ins (from the directory

tree).

10. Select the Upload button.

The Upload Plug-in page displays.

11. From the Upload Plug-in page perform the following:

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Xerox Secure Access Installation Guide

Select the Browse button.a)

b) Select Equitrac XCP Provider file and select the Open button.

c) Select the Upload button.

12. Select the Security folder.

13. In the Security folder, select Plug-in Settings.

14. In the Plug-in Settings folder, select List of Embedded Plug-ins (from the directory

tree).

15. Select the Upload button.

The Upload Plug-in page displays.

16. From the Upload Plug-in page perform the following:

a) Select the Browse button.

b) Select Libraries for Equitrac XCP Provider file and select the Open button.

c) Select the Upload button.

17. Reboot the machine.

a) Select the Status tab.

b) Select Reboot Machine.

A message displays asking: Do you want to reboot?

c) Select OK.

Checking the status of the embedded plug-ins

1. Open an internet web browser.

2. Enter the IP address of the machine in the address field.

3. Press Enter to go to CentreWare®Internet Services.

4. Select the Properties tab.

5. If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

6. Select OK.

7. Select the Security folder.

8. In the Security folder, select Plug-in Settings.

9. In the Plug-in Settings folder, select List of Embedded Plug-ins (from the directory

tree).

10. Under the Status heading, check the status of the plug-ins.

The plug-ins should display Activated.

11. If the Status does not display Activated, select the Start button to activate the plug-in.

12. Ensure that the status for all embedded plug-ins displays Activated.

Deactivating the plug-ins

1. Open an internet web browser.

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Xerox Secure Access Installation Guide

2. Enter the IP address of the machine in the address field.

3. Press Enter to go to CentreWare®Internet Services.

4. Select the Properties tab.

5. If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

6. Select OK.

7. Select the Security folder.

8. In the Security folder, select Plug-in Settings.

9. In the Plug-in Settings folder, select List of Embedded Plug-ins (from the directory

tree).

10. Select Equitrac XCP Provider.

11. Select the Stop button.

A message displays asking Do you want to deactivate the selected plug-in.

12. Select OK.

13. Reboot the machine to deactivate the current plug-in.

a) Select the Status tab.

b) Select Reboot Machine.

A message displays asking: Do you want to reboot?

c) Select OK.

Activating the plug-ins

1. Open an internet web browser.

2. Enter the IP address of the machine in the address field.

3. Press Enter to go to CentreWare®Internet Services.

4. Select the Properties tab.

5. If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

6. Select OK.

7. Select the Security folder.

8. In the Security folder, select Plug-in Settings.

9. In the Plug-in Settings folder, select List of Embedded Plug-ins (from the directory

tree).

10. Under the Status heading, check the status of the plug-ins.

The plug-ins should display Activated.

11. If the Status does not display Activated, select the Start button to activate the plug-in.

12. Recheck that the status for the plug-ins.

The status displays Reboot to Activate.

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Xerox Secure Access Installation Guide

13. Reboot the machine to activate the plug-in.

a) Select the Status tab.

b) Select Reboot Machine.

A message displays asking: Do you want to reboot?

c) Select OK.

After the machine reboots the status then displays Activated.

14. Ensure that the correct version of the plug-in was uploaded and activated.

a) Select the specific plug-in.

b) Select Details to view the correct version of the plug-in.

c) Select Close to return to the List of Embedded Plug-Ins.

Configuring the machine to use Xerox

Secure Access for authentication

The following steps are required for Xerox Secure Access to communicate with the

Authentication feature.

1. Open an internet web browser.

2. Enter the IP address of the machine in the address field.

3. Press Enter to go to CentreWare®Internet Services.

4. Select the Properties tab.

5. If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

6. Select OK.

7. Select the Security folder.

8. Select Authentication Configuration in the directory tree.

9. The Authentication Configuration > Step 1 of 2 displays.

a) Select Xerox Secure Access from the Login Type drop-down menu.

b) Select Apply.

A message displays.

c) Select OK.

d) Select the Status tab.

e) Select Reboot Machine.

A message displays asking: Do you want to reboot?

f) Select OK.

10. Repeat the following steps:

a) Open an internet web browser.

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Xerox Secure Access Installation Guide

b) Enter the IP address of the machine in the address field.

c) Press Enter to go to CentreWare®Internet Services.

d) Select the Properties tab.

e) If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

f) Select OK.

g) Select the Security folder.

h) Select Authentication Configuration in the directory tree.

i) The Authentication Configuration > Step 1 of 2 displays.

11. Select Next.

The Authentication Configuration > Step 2 of 2 displays.

12. Select Configure for Authentication System.

The following steps are OPTIONAL and are used for setting access control.

13. Select Authentication Configuration in the directory tree.

14. The Authentication Configuration > Step 1 of 2 displays.

15. Select Next.

The Authentication Configuration > Step 2 of 2 displays.

16. In the Device Default State Configuration area, select the Configure button (for

Service Access).

17. Select one of the following settings for each service you want to control:

•Unlocked: This selection allows unrestricted access.

•Locked (Show Icon): This selection requires the user to login in order to gain

access. The service icon is visible to all users in the All Services screen.

•Locked (Hide Icon): This selection requires the user to login in order to gain access.

The service icon is hidden until an authorized user logs in.

18. Select Apply.

If prompted, enter the system administrator user name and password.

The default user name is admin and the default password is 1111.

19. Select OK.

20. Reboot the machine.

a) Select Reboot Machine.

A message displays asking: Do you want to reboot?

b) Select OK.

Enabling Xerox Secure Access settings

1. Open an internet web browser.

Xerox®D95/D110/D125 Printer and Copier/Printer

Xerox® Secure Access Installation Guide

Xerox Secure Access Installation Guide

Otros manuales para D95

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Xerox

Xerox

Xerox DOCUCOLOR 12 Manual de usuario

Xerox

Xerox Phaser 4510 Manual de instrucciones

Xerox

Xerox Phaser EX7750 Manual de usuario

Xerox

Xerox DocuColor 7000 Manual de usuario

Xerox

Xerox 3130 - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox Phaser 6360 Manual de funcionamiento

Xerox

Xerox Phaser 6280 Manual de usuario

Xerox

Xerox Phaser 4 400 Manual de usuario

Xerox

Xerox Phaser 6300 Manual de usuario

Xerox

Xerox ColorQube 8580 Manual de funcionamiento

Xerox

Xerox DOCUCOLOR 12 Instrucciones de montaje

Xerox

Xerox DocuPrint C1618 Manual de usuario

Xerox

Xerox Legacy 4110 Manual de usuario

Xerox

Xerox Phaser 5500 series Manual de usuario

Xerox

Xerox Phaser 4622 Manual

Xerox

Xerox Nuvera 100 Manual técnico

Xerox

Xerox 3600DN - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox DOCUCOLOR 12 Manual del propietario

Xerox

Xerox ApeosPort C6550 I Manual de servicio

Xerox

Xerox DocuPrint 92C NPS Manual de usuario

Xerox

Xerox PHASER 3116 Manual de usuario

Xerox

Xerox 4250 - WorkCentre - Copier Instrucciones y recetas

Xerox

Xerox Docutech 6100 Manual

Xerox

Xerox Versant 3100 Press Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario