X-Vision XIR621 Manual de usuario

CCTV

Model:

XIR621

Colour Vandal Resistant Dome

Cameras with 25 metres Nightvision

Before you begin

•Please unpack the box carefully and identify that all the parts are present.

•Do not cut the camera cables, this will void the warranty.

•Makesure you use only the recommended power supply.Damage caused to the camera by

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when

choosing a mounting position.

•The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

•Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with

such a large lux level variation.

Model: XIR621

Colour 25m Nightvision

Dome Camera

Thank you for purchasing this Xvision camera. Before operating this

product, please read this instruction manual carefully.

When in use please avoid direct contact with eyes and do not touch

the camera body as it can get very hot.

When installing the camera, please avoid pointing it directly at

paper or flammable materials.

Please avoid all direct contact with the tempered glass cover to

avoid contamination. If you need to clean the cover use cotton wool

balls dipped in alcohol or glass wipes.

The XIR621 colour vandal resistant nightvision dome camera is

designed for high risk applications. It offers very high resolution 550

TVL images from its Sony 1/3" Ex View CCD sensor and will provide

images in complete darkness up to 25 metres and beyond 25 metres in

light levels above 0.05 lux. It features an Auto Iris Varifocal Lens and is

designed for internal or external use. The 3 axis mechanism allows it to

be wall or ceiling mounted without the need for extra brackets.

1. Safety Precautions

2. Product Description

Sony 1/3" Ex View CCD image sensor for 550 TVL resolution images

and 0.01 lux low light sensitivity

Varifocal Auto Iris 2.8 to 11.0mm lens with 26° to 92° viewing angle

for super sharp images and easy selection of the optimum viewing

angle during installation.

Integrated Long Life Infra Red LEDs turn on automatically in low light

conditions or complete darkness and provide up to 25 metres

Nightvision.

Dynamic Night View technology provides clear images without the

need for IR LEDs down to 0.002 lux, this is achieved by using Field

Integration, please note due to way in which field integration works,

whilst it is in operation the frame per second will reduce. The darker the

scene the lower the frame per second.

Smart DNR (Digital Noise Reduction) reduces the noise on the image

when viewing in low lux environments (likeat night), this reduces the

size of the image when being recorded by a DVR, resulting in a saving

of disk space.

3. Features

4. Contents

XIR621 Camera 4x Fixing Screws

4x Wall Plugs

1. Select a suitable position on the wall or ceiling to install the camera.

2. Remove the dome housing from the camera housing by removing the

four cross head retaining screws.

3. Secure the camera in the desired ceiling position with the four fixing

screws (as shown in Figure 1).

Figure 1

5. Installation

4. Adjust the camera viewing angle by first tilting (STEP 1) then rotating

the camera module (STEP 2), and then turn the horizontal adjustment

ring (STEP 3) to correct the image and achieve proper orientation (as

shown in Figure 2).

5. Place the dome cover on the camera and tighten it by turning it

clockwise.

Camera

Module Horizontal

Adjustment

Ring

Top

Tilt

Rotate

Figure 2

1. Connect the video output to the monitor or other video device

through a 75 Ohms type coaxial cable.

2. Connect the power source, insert the AC plug into the AC socket and

the DC plug into the DC Jack (+12V DC in jack centre) (as shown in

Figure 3).

3. Once the picture appears on the monitor, open the cover and make

the Zoom Adjustment by rotating the screw (NEAR-Anti-clockwise,

FAR-Clockwise) until you get the desired view. Next make the Focal

Adjustment by rotating the screw (TELE-Anti-clockwise, WIDE-

Clockwise) until you get the desired view (as shown in Figure 4).

4. Tighten the two screws,then replace the dome cover.

6. How to Operate

Figure 3

Figure 4

Press this Control

UP, DOWN

LEFT, RIGHT

SETUP (MENU)

Action

Select a new item

Select a menu item

Access a sub menu

7. Camera OSD Control

8. OSD Menu Structure

Push

DOWN

to Setup

LENS

●DC ●MANUAL

●AUTO ●OFF

SHUTTER

●OFF ●FLK●MANUAL ●ESC

WHITEBAL

●ATW●AWC●MANUAL

BACKLIGHT

●OFF ●LOW●MIDDLE●HIGH

AGC

●OFF ●LOW●MIDDLE●HIGH

DNR

●CAMERAID●COLOUR●SYNC

●MOTIONDET●PRIVACY●MIRROR

●SHARPNESS ●RESET●RETURN

SPECIAL

SENS UP/DSS

EXIT

SET UP MENU

9. SETUP Menu Functions

1LENS

Select lens type

2SHUTTER

Adjusts shutter settings.

Flickerless mode(FLK) reduces on-screen flickering.

Electronic Shutter Control(AUTO) adjusts brightness level on screen.

Manual mode allows you to adjust the shutter speed from

1/60~1/120,000 of a second(NTSC), or 1/50~1/100,000 (PAL).

FLK is the only option available when the camera lens is set to the

recommended DC mode.

3COLOUR

<Option: AUTO/ON>

AUTO= Automatically detect colour or black/white.

ON= Full time colour mode

4SYNC

INT = Synchronize the vertical interval sync

pulse of your camera with other equipment to

reduce the effect of picture roll on the monitor.

L/L (Line Lock) = Adjust the phase from 0° ~

359°.

INTERNAL = When line lock is not required.

LINELOCK = Adjust the vertical phase(VPH) from 000 - 359 (factory

default is 0). Line line is only available with 24VAC power.

RETURN = Press MENU to return to the SETUP menu.

5MOTION DET

<Option: OFF/ON>

Detect moving objects on screen; displays MOTION

DETECTED along with the number of movements

counted. Select the area on screen you want to

observe.

AREA SEL= Select a motion detection grid (top left, top right, bottom

left, bottom right) to modify.

AREA STATE= Activate or deactivate the selected grid.

TOP/DOWN/LEFT/RIGHT= Press LEFT or RIGHT menu control left or

right to alter the dimensions of the selected grid.

6PRIVACY

<Option: OFF/ON>

Mask up to 4 areas of the screen from video

monitoring

9. SETUP Menu Functions (continued)

AREA SEL= Select a motion detection grid (top left, top right, bottom

left, bottom right) to modify.

AREA STATE= Activate or deactivate the selected grid.

TOP/DOWN/LEFT/RIGHT= Press LEFT or RIGHT menu control left or

right to alter the dimensions of the selected grid.

7MIRROR

<Option: OFF/ON>

Adjust level of sharpness / contrast / CB_Gain / CR_Gain.

8SHARPNESS

<Option: OFF/ON>

Sharpen the image on screen.

Excessive sharpening may cause picture noise.

9RESET

Restore all factory default settings.

10 RETURN

Return to the main SETUP menu.

On the SETUP menu, press the menu control UP or DOWN and then

select SPECIAL.

Press the SETUP(MENU) control to access the SPECIAL MENU.

1CAMERA ID

<Option: OFF/ON>

Display a name and/or number on the monitor.

To add a camera title:

UP,DOWN,LEFT,RIGHT menu control= Select a character,then press

(SETUP) MENU to accept it. The character is saved and the title

cursor at the bottom of the screen moves to the next position.

<-- -->= Go back or forward in the title name to make changes.

CLR= Delete the entire name and start again.

POS= Position the camera title on the screen. Press (SETUP) MENU to

confirm the position.

END= Accept the new name.

10. SPECIAL Menu Functions

Tabla de contenidos

Otros manuales de Cámara de seguridad de X-Vision

X-Vision

X-Vision XSD27ZIR-2 Manual de usuario

X-Vision

X-Vision XC960BA Manual de usuario

X-Vision

X-Vision XC960DA Manual de usuario

X-Vision

X-Vision PC810 Manual de usuario

X-Vision

X-Vision XC960S30 Manual de usuario

X-Vision

X-Vision VIS200DX-2 Manual de usuario

X-Vision

X-Vision VIS238D Manual de usuario

X-Vision

X-Vision XSD27ZIR Manual de usuario

X-Vision

X-Vision PCC427 Manual de usuario

X-Vision

X-Vision XIR538 Manual de usuario

X-Vision

X-Vision XSD27ZS Manual de usuario

X-Vision

X-Vision XHC1080S10IRN Manual de usuario

X-Vision

X-Vision XC960VV Manual de usuario

X-Vision

X-Vision XSD27ZIR-2 Manual de usuario

X-Vision

X-Vision VIS200DX-3 Manual de usuario

X-Vision

X-Vision XP1080B Manual de usuario

X-Vision

X-Vision XHC1080VB Manual de usuario

X-Vision

X-Vision XP1080S20 Manual de usuario

X-Vision

X-Vision XSD27ZIR-2 Manual de usuario

X-Vision

X-Vision VIS249DX Manual de usuario

X-Vision

X-Vision XAM202-208 Manual de usuario

X-Vision

X-Vision XIR501 Manual de usuario

X-Vision

X-Vision VIS249D-2 Manual de usuario

X-Vision

X-Vision HD 960H Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario