X-Rite 890 Manual de usuario

890

AUTOMATIC STRIP READING DENSITOMETER

Operation Manual

Dear Customer:

Congratulations! We at X-Rite, Incorporated are proud to present you with

X-Rite 890 Auto Strip Reading, Color Photographic Densitometer. This

instrument represents the very latest in microcontrollers, integrated circuits,

optics, and display technology. As a result, your X-Rite instrument is a

rugged and reliable instrument whose performance and design exhibit the

qualities of a finely engineered instrument, which is not surpassed.

To fully appreciate and protect your investment, we suggest that you take the

necessary time to read and fully understand this manual. As always, X-Rite

stands behind your instrument with a one year limited warranty, and a dedicated

service organization. If the need arises, please don’t hesitate to call us.

Thank you for your trust and confidence.

X-Rite, Incorporated

I N T R O D U C T I O N

FCC

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

Canada

This Class A digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

NOTE: Shielded interface cables must be used in order to maintain compliance

with the desired FCC and European emission requirements.

CAUTION: Operational hazard exists if AC adapter other than X-Rite SE30-77

(100-240V) is used.

VORSICHT: Betriebsgefahr besteht bei Gebrauch von anderen Adaptern als

X-Rite SE30-77 (100-240 V).

AVISO: No use otro adaptador C.A. que no sea la pieza X-Rite SE30-77 (100-

240V), por el riesgo de mal funcionamiento del equipo.

ATTENTION: Ne pas utiliser d’adaptateur autre que SE30-77 (100-240V) de X-

Rite au risque de mauvais fonctionnement de l’appareil.

AVVISO: Non usare un altro adattatore C.A. che non è del pezzo X-Rite SE30-

77 (100-240V), per il rischio di malfunzionamento dell'apparecchio.

The Manufacturer: X-Rite, Incorporated

Der Hersteller: 4300 44th Street, S.E.

El fabricante: Grand Rapids, Michigan 49512

Le fabricant:

Il fabbricante:

Declares that: Densitometer

gibt bekannt: 890

advierte que:

avertit que:

avverte che:

is not intended to be connected to a public telecommunications network.

an ein öffentliches Telekommunikations-Netzwerk nicht angeschlossen werden soll.

no debe ser conectado a redes de telecomunicaciones públicas.

ne doit pas être relié à un réseau de télécommunication publique.

non deve essere connettuto a reti di telecomunicazioni pubblici.

U S E R I N F O R M A T I O N

iii

CE DECLARATION

Manufacturer's Name: X-Rite, Incorporated

Manufacturer's Address: 4300 44th Street, S.E.

Grand Rapids, Michigan 49512

U.S.A.

Model Name: Densitometer

Model No.: 890

Directive(s) Conformance: EMC 89/336/EEC LVD 73/23/EEC

WEEE

As of August 13, 2005, X-Rite products meet the European Union – Waste Electrical and

Electronic Equipment (WEEE) directive. Please refer to www.xrite.com for more information on

X-Rite’s compliance with the WEEE directive.

Warning: This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

PROPRIETARY NOTICE

The information contained in this manual is derived from patent and

proprietary data of X-Rite, Incorporated. This manual has been prepared

solely for the purpose of assisting in the use and general maintenance of this

instrument.

The contents of this manual are the property of X-Rite, Incorporated and are

copyrighted. Any reproduction in whole or part is strictly prohibited.

Publication of this information does not imply any rights to reproduce or use

this manual for any purpose other than installing and operating the

equipment described herein.

No part of this manual may be reproduced, transcribed, transmitted, stored in

a retrieval system, or translated into any language or computer language, in

any form or by any means, electronic, magnetic, mechanical, optical, manual,

or otherwise, without the prior written permission of an officer of

X-Rite, Incorporated.

This instrument may be covered by one or more patents. Refer to the

instrument for actual patent numbers.

X-Rite®is a registered trademark of X-Rite, Incorporated

All other logos, product names, and trademarks mentioned are the property of their respective holders.

I N T R O D U C T I O N

LIMITED WARRANTY

X-Rite, Incorporated (“X-Rite”) warrants each instrument manufactured to

be free of defects in material and workmanship (excluding battery pack) for a

period of 12 months. This warranty shall be fulfilled by the repair or

replacement, at the option of X-Rite, of any part or parts, free of charge

including labor, F.O.B. its factory or authorized service center.

This warranty shall be voided by any repair, alteration, or modification, by

persons other than employees of X-Rite, or those expressly authorized by X-

Rite to perform repairs, and by any abuse, misuse, or neglect of the product,

or by use not in accordance with X-Rite’s published instructions.

X-Rite reserves the right to make changes in design and /or improvements to

its products without any obligation to include these changes in any products

previously manufactured. Correction of defects by repair or replacement

shall constitute fulfillment of all warranty obligations on the part of X-Rite.

THIS WARRANTY IS EXPLICITLY IN LIEU OF ANY OTHER

EXPRESSED OR IMPLIED WARRANTIES, INCLUDING ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR

ANY PARTICULAR PURPOSE. THIS WARRANTY OBLIGATION IS

LIMITED TO REPAIR OR REPLACEMENT OF THE UNIT RETURNED

TO X-RITE OR AN AUTHORIZED SERVICE CENTER FOR THAT

PURPOSE.

This agreement shall be interpreted in accordance with the laws of the State

of Michigan and jurisdiction and venue shall lie with the courts of Michigan

as selected by X-Rite, Incorporated..

TABLE OF CONTENTS

This manual is organized into eight sections and four appendices. In order to

make the best use of your instrument, it is recommended that you read all

sections and appendices.

SECTION ONE -Getting Started

Unpacking and Inspection__________________________________1-1

Packing Drawing and Parts List_______________________1-1

Product Description_______________________________________1-2

Applying Power _________________________________________1-3

User Interface ___________________________________________1-4

Channel and Function Menus_________________________1-4

Display and Keyswitch Definition_____________________1-5

Menu Keys _______________________________________1-5

Help Messages ____________________________________1-5

Adjusting the Paper Guides_________________________________1-6

Strip Measurement Techniques______________________________1-7

Strip Information __________________________________1-7

Paper Strip _______________________________________1-7

Film Strip ________________________________________1-10

Printer Balance Strip _______________________________1-10

SECTION TWO - Instrument Calibration

Calibration Information____________________________________2-1

Frequency of Calibration ____________________________2-1

Auto Calibration Procedure_________________________________2-2

Manual Calibration Procedure_______________________________2-3

SECTION THREE - Setting System Configuration

Instrument Configuration __________________________________3-1

Page 1 Configuration Options ________________________3-1

Page 2 Configuration Options ________________________3-2

Page 2a Configuration Options _______________________3-2

Page 2b Configuration Options _______________________3-3

Page 2c Configuration Options _______________________3-3

Page 2d Configuration Options _______________________3-3

Configuration Setup Procedure _______________________3-3

I N T R O D U C T I O N

SECTION FOUR - Strip Operation

Measuring Strips _________________________________________4-1

View Strip Data ___________________________________4-3

Manually Transmitting Strip Data____________________________4-5

SECTION FIVE - Service and General Maintenance

Repair Information _______________________________________5-1

Cleaning the Instrument ___________________________________5-2

General Cleaning __________________________________5-2

Cleaning the Optics ________________________________5-2

Cleaning the Calibration Strip ________________________5-3

Replacing the Read Lamp __________________________________5-4

Troubleshooting Tips _____________________________________5-5

APPENDIX A - Technical Specification

APPENDIX B - Display Messages

APPENDIX C - Term Abbreviations

APPENDIX D - Parts List and Packaging Drawing

APPENDIX E - 890 Instrument Firmware Update

1-1

S E C T I O N O N E

Getting Started

This section covers unpacking, inspection, and general set up of your

instrument. Product description, paper guide adjustments, and measurement

techniques are also include.

Section One Contents

•Unpacking and Inspection

•Product Description

•Applying Power

•User Interface

•Adjusting the Paper Guides

•Strip Measurement Techniques

UNPACKING AND INSPECTION

After removing the instrument from the shipping carton, inspect for possible

damage. If any damage occurred during shipping, immediately contact the

transportation company. Do not proceed with installation until the carrier’s

agent has inspected the damage.

Your instrument was packaged in a specially designed carton to assure

against damage. If reshipment is necessary, the instrument should be

packaged in the original carton. If the original carton is not available, contact

X-Rite to have a replacement shipped to you.

Packaging Drawing and Parts List

Check your packaging contents against your packing list and your original

order. Detailed packaging drawing and parts list is included in this manual as

Appendix D.

SECTION ONE

1-2

PRODUCT DESCRIPTION

The X-Rite 890 automated instruments measures paper, film, and printer

balance control strips. Simply insert the strip into the instrument for

motorized, automatic measurements. Red, green, and blue density data is

sorted for fields such as HD, LD, and Stain, then simultaneously displayed

and transmitted to a minilab printer for analysis.

To accommodate the different size control strips, the instrument has adjustable

paper guides on each side of the control strip entrance. Adjustment is made by

simply sliding the paper guides to the settings displayed for the selected strip.

The instrument communicates through a standard RS-232 interface. If you

wish to remotely control your instrument, you must use the remote control

interface protocol discussed in the RS-232 Interface Manual—available from

X-Rite, Incorporated.

2 x 16 Character

Display

Operating Key l

Paper Guide

35mm Strip Entrance Power Input

RS-232 Serial

Interface

Paper Guide

Operating Key ll

Operating Key lll

Operating Key llll

Tabla de contenidos

Otros manuales de Instrumento de medición de X-Rite

X-Rite

X-Rite PANTONE i1 PRO 3 PLUS Manual de usuario

X-Rite

X-Rite RapidMatch XI Manual de usuario

X-Rite

X-Rite Ci61 Manual de usuario

X-Rite

X-Rite MA 3 Manual de usuario

X-Rite

X-Rite 939 Manual de usuario

X-Rite

X-Rite 891 Manual de usuario

X-Rite

X-Rite RM200QC Manual de usuario

X-Rite

X-Rite 552 Manual de usuario

X-Rite

X-Rite i1 Display Pro Manual de usuario

X-Rite

X-Rite 301 Manual de usuario

X-Rite

X-Rite COLOREYE XTH Manual de usuario

X-Rite

X-Rite X-Rite Manual de usuario

X-Rite

X-Rite i1Studio Manual de usuario

X-Rite

X-Rite DTP32 Manual de usuario

X-Rite

X-Rite Color i7 Manual de usuario

X-Rite

X-Rite BASF 12/6 Manual de usuario

X-Rite

X-Rite EyeOne Pro Manual de usuario

X-Rite

X-Rite capsure Manual de usuario

X-Rite

X-Rite 962 Manual de usuario

X-Rite

X-Rite CAPSURE Cosmetic Manual de usuario

X-Rite

X-Rite iCPlate2 Manual de usuario

X-Rite

X-Rite Ci7860 Series Manual de usuario

X-Rite

X-Rite i1Pro Manual de usuario

X-Rite

X-Rite Ci51 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario