Wildview Infrared Xtreme STC-TGL2IR Manual de usuario
STC-TGL2IR
User’s Manual
Toll Free Customer Support 1-888-304-612
www.wildviewcam.com
Version 1.0 07/07
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 2
For Customer Service or Warranty Information Call
Toll Free
888-304-612
WILDVIEW
P.O. Box 5 5189
Grand Prairie, Texas 7505 -5189
Wildview Limited Warranty
Your Wildview scouting camera is covered by a 90 days Limited
Warranty on parts and labor from the date of original purchase, and
purchases must be made through an authorized dealer. The warranty
covers defects in workmanship and materials. The warranty does not
apply to units, which have been damaged or abused intentionally or
unintentionally. A purchase from individuals or unauthorized internet
sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any
unauthorized service will void warranty. Original sales receipt must be
produced for any warranty service and a Return Authorization (RA)
number must be obtained from customer service at 888- 04-6125
prior to returning product
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 3
Manual Contents
Camera overview 4
Camera kit contents 6
Battery and memory Installation 6
Definition 10
Programming 11
Mounting the camera 14
Viewing images 18
Saving and Deleting images 21
Memory compatibility chart 24
Technical Specs 25
General Information 28
Image Capacity Chart 0
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 4
Camera overview
Front view Side view
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 5
Open view image with major parts indication
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 6
Camera kit contents
• STC-TGL2IR Digital Scouting Camera
• Camera driver
• User Manual
• USB cable
• Strap
Battery & memory installation
The Wildview Digital Scouting Camera is designed to
operate using alkaline batteries for optimum performance.
Warning:
Do not use a different Voltage lead
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 7
NOTE: Always have camera in the OFF position when
installing or removing batteries.
Batteries “C” cell
The internal battery compartment accepts 4 “C” cell
batteries. Be sure to use high quality brand name
alkaline batteries. Install batteries with correct polarity
(+/-) as noted inside the battery compartment.
12V Lead Acid external battery
The Wildview Scouting Camera is equipped with an
external power jack designed to accept a barrel plug
cable to attach to a sealed lead acid battery. (sold
separately). Battery cable and complete 12V Lead Acid
battery kits are available wherever Wildview scouting
cameras are sold or call toll free 888- 04-6125. Only
Wildview external battery accessories are recommended.
• Insert the battery pack plug into the DC 12V jack at
the bottom of camera housing
• Turn on the camera by sliding the power switch to
PIR position
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 8
Please make sure the voltage and polarity (+/-) are
correct before connection. Incorrect voltage or
polarity (+/-) will damage the camera.
Memory Options
Your Wildview scouting camera is equipped with 16MB
internal memory.
The camera is also equipped with an expandable media
card slot capable of accepting up to 2GB* SD card (sold
separately). With no memory card inserted into the slot,
the camera will use the built in SDRAM memory to store
images. If an SD card is inserted into the slot then the
camera will bypass the built in memory and utilize the SD
memory. The front counter display will show the number
of images on the built in memory unless the expansion
card is inserted at which point the front counter will only
display the number of images stored in the expansion
card.
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 9
Inserting SD card
ake sure camera is in the OFF position whenever
adding or removing memory.
• Insert SD memory card in to the SD card slot
completely and in the correct direction as shown on
the inside of the housing.
• To remove the SD memory card, depress the SD
card and pull out the card gently.
SD cards must be clean (no images from other
sources.)
STC-TGL2IR
www.wildviewcam.com Toll Free 888- 04-6125 10
Definition
• Time out: To set the amount of preset time in
minutes the camera will sleep between PIR triggering
• Resolution: The resolution selection that you have
selected.
Model Hi Low
STC-TGL2IR 2.0M 1. M
• Date/Time: To set date and time stamp in the picture
• Infrared: Auto / On / Off mode
• Burst: To set the number of pictures the camera will
take per PIR triggering
o 1P: Single image capturing per PIR triggering
o 2P: Two images continuous capturing per PIR
triggering
o P: Three images continuous capturing per PIR
triggering
Tabla de contenidos
Otros manuales de Cámara de exploración de Wildview
Wildview
Wildview Wildview STC-TGL2M Manual de usuario
Wildview
Wildview TGLX8IR Series Manual de usuario
Wildview
Wildview TGLX2IR Series Manual de usuario
Wildview
Wildview TGLX5IR Series Manual de usuario
Wildview
Wildview TGLX8IR Series Manual de usuario
Wildview
Wildview Xtreme 3 Manual de usuario
Wildview
Wildview STC-TGLBC2 Manual de usuario
Wildview
Wildview Infrared Xtreme STC-TGL5IR Manual de usuario
Wildview
Wildview STC-WV40NG Manual de usuario
Wildview
Wildview InfraredXtreme STC-TGLX35IR Manual de usuario
