WIDCOMM DBT-120 Manual de usuario
SpyLite User’s Guide
for
BTW
General Release
April 18, 2003
Document Number: 110300-1048
Version: 2.5
SpyLite User’s Guide for BTW
LICENSED SOFTWARE
© Copyright 1999 - 2003, WIDCOMM, Inc. ("WIDCOMM"). All rights reserved.
WARNING: copyright law and international treaties protect this software and accompanying
documentation. Unauthorized reproduction or distribution of this software, or any portion of it, may result
in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the
law.
Use of this software is governed by the terms of the end user license agreement that accompanies or is
included with such software. Unless otherwise noted in the end user license agreement, or herein, no part
of the documentation accompanying this software, whether provided in printed or electronic form may be
reproduced in any form, or stored in a database or retrieval system, or transmitted in any form or by any
means, or used to make any derivative work (such as translation, transformation, or adaptation) without the
express, prior written consent of WIDCOMM.
Trademark(s) TM and Registered Trademark(s) ®
WIDCOMM and the WIDCOMM logo are trademarks of WIDCOMM, Inc.
Bluetooth is a trademark owned by the Bluetooth SIG, Inc., and used by WIDCOMM under license.
Microsoft and Windows are registered trademarks of Microsoft Corporation. Other brand and product
names may be registered trademarks or trademarks of their respective holders.
April 18, 2003 WIDCOMMinc i
SpyLite User’s Guide
Table of Contents
1 INTRODUCTION ........................................................................................................ 1
1.1 OPEN THE PROGRAM ................................................................................................. 1
2 THE SPYLITE TRACE WINDOW................................................................................ 2
3 MENUS & TOOLBAR ................................................................................................. 3
3.1 FILE MENU ............................................................................................................. 4
3.2 EDIT MENU ............................................................................................................. 5
3.3 TOOLS MENU .......................................................................................................... 6
3.3.1 Format.......................................................................................................... 6
3.3.2 File Logging Options... .................................................................................... 8
3.3.2.1 Saving log files for trace ...................................................................... 9
3.3.3 Set Protocol Trace ........................................................................................ 11
3.3.4 Clear Trace ................................................................................................. 11
Table of Figures
Figure 1: The SpyLite interface. ..................................................................................................... 2
Figure 2: SpyLite menus and toolbar options. .................................................................................. 3
Figure 3: File menu. ...................................................................................................................... 4
Figure 4: Find in Trace option ........................................................................................................ 5
Figure 5: The Find in Trace dialog box ........................................................................................... 5
Figure 6: Tools menu..................................................................................................................... 6
Figure 7: Tools menu > Format... > Trace Color tab......................................................................... 7
Figure 8: Tools menu > Format… > Set Font tab ............................................................................. 7
Figure 9: Tools menu > Format... > Trace background and text color pickers. .................................... 8
Figure 10: Tools menu > File Logging Options... dialog box. ............................................................. 9
Figure 11: The effects of the Append and Prepend options. .............................................................. 10
Figure 12: Tools menu > Set Protocol Trace options dialog box........................................................ 12
April 18, 2003 WIDCOMMinc ii
SpyLite User’s Guide
1 Introduction
The BTServer SpyLite (SpyLite) application is part of WIDCOMM’s BTW software.
The application allows the user to monitor Bluetooth trace information based on BTW
software version dependent profiles. You will have received the SpyLite application that
matches your selection of profiles in BTW
SpyLite monitors Bluetooth activity; when the application is open, the current activity is
displayed in the trace window in the sequence that the Bluetooth devices send and
respond to each other.
Some knowledge of the sequence of Bluetooth events is necessary to understand the
information that is displayed.
Data throughput analysis and data integrity check-functions are incorporated into the
displayed results
1.1 OPEN THE PROGRAM
Double-click SpyLite.exe in the BTW installation folder to run the program.
April 18, 2003 WIDCOMMinc 1
SpyLite User’s Guide
2 The SpyLite Trace Window
Bluetooth commands and the responses to those commands are displayed in this window
in the sequence that they are executed, depending on user configuration (Figure 1).
The trace information that is displayed is configurable; the options are described later in
this document.
Figure 1: The SpyLite interface.
April 18, 2003 WIDCOMMinc 2
SpyLite User’s Guide
3 Menus & Toolbar
Figure 2 shows the Menu items and Icon shortcuts of the SpyLite interface.
Each icon displays a ToolTip (ScreenTip) when the cursor is over it.
The remainder of this section describes the individual menu items and the selections
within each.
Figure 2: SpyLite menus and toolbar options.
April 18, 2003 WIDCOMMinc 3
SpyLite User’s Guide
3.1 FILE MENU
The File menu (Figure 3) has one option: Exit, which closes the SpyLite application.
Figure 3: File menu.
April 18, 2003 WIDCOMMinc 4
SpyLite User’s Guide
3.2 EDIT MENU
The Edit menu (Figure 4) has one option: Find in Trace.
This icon – — will also access Find in Trace dialog box (Figure 5).
Figure 4: Find in Trace option
Find in Trace allows the user to locate a word or group of words in the trace window.
• Type the text string to be found in the Find what: field.
• Check the “Match whole word only” and/or “Match case” options, as
appropriate, and click Find All to execute the search.
The Trace window must be the active window, i.e., it must have the “focus.”
Each instance of the search string will be highlighted in the trace window.
Figure 5: The Find in Trace dialog box
April 18, 2003 WIDCOMMinc 5
SpyLite User’s Guide
3.3 TOOLS MENU
The Tools menu (Figure 6) contains two groups of functions:
• Format/File Logging Options...—sets text and background colors; sets the font
and font size; sets log file options.
• Set Trace/Clear Trace Options—controls the display and level of trace messages;
clears the trace window
Figure 6: Tools menu.
3.3.1 Format...
Displays a dialog box with two tabs (Figure 7):
• Trace Colors (Figure 7)—displays a list of trace items for which custom text
colors and background colors can be set using the Windows color-picker.
To set the trace colors:
a) Click Tools > Format… and the Trace Colors tab.
b) Double-click an item, e.g., “Error trace,” in the list (Figure 7) to change its
color properties. The background color picker (Figure 9) appears.
c) Choose a background color from the color picker and click OK.
d) A second color picker appears to allow the selection of the text color.
Choose a text color and click OK.
The “Default” button on the Trace Colors tab resets the background and text
colors to their original settings.
NOTE: The Select Text Color picker appears in exactly the same location on the screen as the
Select Background Color picker. The only way to tell them apart is to read the
menu title bar.
• Set Font (Figure 8)—provides a means to select the font and font size of the text
in the Trace window.
To change the font and font size:
a) Select Tools > Format… and the Set Font tab
b) Choose a font from the drop-down menu. A sample of the font style appears
in the Preview section of the dialog box.
c) Choose a font size from the drop-down menu.
d) Click OK to apply the choices and close the Color and Font Options dialog
box.
The Default button resets the text font style and size in the Trace window to the
default, Courier New, nine points.
April 18, 2003 WIDCOMMinc 6
SpyLite User’s Guide
Figure 7: Tools menu > Format... > Trace Color tab.
Figure 8: Tools menu > Format… > Set Font tab
April 18, 2003 WIDCOMMinc 7
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Software de WIDCOMM
Manuales populares de Software de otras marcas
PS Audio
PS Audio PowerPlay Manual del propietario
Brady
Brady LOCKOUT PRO 3.0 Manual de servicio
Avaya
Avaya Interaction Center Manual de usuario
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manual
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario
Oracle
Oracle Application 9i Manual de usuario
Acer
Acer RDM Manual de usuario
Canon
Canon Vixia HF21 Manual de usuario
Canon
Canon ZR950 Manual de usuario
Samsung
Samsung Auto Backup Manual de usuario
Polycom
Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manual de usuario