Whispbar K390W Manual de usuario
K390W
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 1 x 1 x 1
x 1 x 4 x 4
Revision No: 7G 1
Fitting Kit K390W
MAX kgs (lbs)
W/P WHD
Audi
A4, 4dr Sedan 07-Nov 15 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
A4, 4dr Sedan 08-Feb 16 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
A4, 4dr Sedan 08-Nov 15 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
A4, 4dr Sedan 08-Nov 15 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
A4, 4dr Sedan 08-Nov 15 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
A4, 4dr Sedan 09-Feb 16 US 75 kgs (165 lbs) 75 kgs (165 lbs)
S4, 4dr Sedan 08-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
S4, 4dr Sedan 08-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
S4, 4dr Sedan 08-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
S4, 4dr Sedan 08-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
S4, 4dr Sedan 08-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
S4, 4dr Sedan 08-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit K390W
X
A B C 1 2 3
A4, 4dr Sedan 07-Nov 15 (ZA) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
A4, 4dr Sedan 08-Feb 16 (NZ) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
A4, 4dr Sedan 08-Nov 15 (AU) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
A4, 4dr Sedan 08-Nov 15 (EU) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
A4, 4dr Sedan 08-Nov 15 (CN) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
A4, 4dr Sedan 09-Feb 16 (US) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
S4, 4dr Sedan 08-+ (AU) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
S4, 4dr Sedan 08-+ (CN) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
S4, 4dr Sedan 08-+ (EU) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
S4, 4dr Sedan 08-+ (NZ) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
S4, 4dr Sedan 08-+ (ZA) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
S4, 4dr Sedan 08-+ (US) -330mm 410mm - 842mm 830mm -
-12 -1/1ths" 16 1/8ths" - 33 1/8ths" 32 11/16ths" -
3
Fitting Kit EN
K390W
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
4
Fitting Kit EN
K390W
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
5
Fitting Kit EN
K390W
●Remove locking screw.
●Apply protective strip as shown.
Trim if required.
●A = Clear
B = Grey
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
6
Fitting Kit EN
K390W
●Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
●Refer to the underside of the pad for the
part number.
●Letters refer to the pad part numbers and
position.
●Pad Part Number:
A = 11-04-251
B = 11-04-250
C = 11-04-246
D = 11-04-247
7
Fitting Kit EN
K390W
●Fit rubber pads (supplied with fitting kit) to
foot. Pad may vary in shape to that shown.
●Make sure the pad fits into the holes
underneath the foot.
Fitment
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Please check the front of this manual for
information relating specifically to your
vehicle.
8
Fitting Kit EN
K390W
●Locate vehicle's fixed points.
●Clamps directly to edge of roof under the
doors, pin locates in hole on vehicle
●Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
●Tighten locking screw on both legs evenly.
9
Fitting Kit EN
K390W
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Otros manuales para K390W
1
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Whispbar
Whispbar
Whispbar K096W Manual de usuario
Whispbar
Whispbar K592W Manual de usuario
Whispbar
Whispbar K385W Manual de usuario
Whispbar
Whispbar K869W Manual de usuario
Whispbar
Whispbar K451W Manual de usuario
Whispbar
Whispbar K485W Manual de usuario
Whispbar
Whispbar K463W Manual de operación e instalación
Whispbar
Whispbar K916W Manual de usuario
Whispbar
Whispbar S44W Manual de operación e instalación
Whispbar
Whispbar K621 Manual de usuario
Whispbar
Whispbar K072W Manual de usuario
Whispbar
Whispbar K189W Manual de operación e instalación
Whispbar
Whispbar K392W Manual de operación e instalación
Whispbar
Whispbar K563W Manual de usuario
Whispbar
Whispbar K347W Manual de usuario
Whispbar
Whispbar K723W Manual de usuario
Whispbar
Whispbar K992W Manual de usuario
Whispbar
Whispbar K935W Manual de usuario
Whispbar
Whispbar K890W Manual de usuario
Whispbar
Whispbar K619W Manual de operación e instalación
