Whalen WMFP60FH-14 Manual de usuario

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2017-05-29 Rev. 0001-B Factory: KONRIC

60" Fall Harvest Fireplace

Model # WMFP60FH-14

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURC

HASE

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: 60" Fall Harvest Fireplace

MODEL #: WMFP60FH-14

MADE IN CHINA

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be adjusted

slightly, turn the appropriate screw, as illustrated.

1. TO ADJUST DOOR FORWARD OR BACKWARD.

2. TO ADJUST DOOR TO RIGHT OR TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

MAXIMUM RECOMMENDED WEIGHT LOADS

MAXIMUM LOAD 50 lb. (22.6 kg)

FITS UP TO MOST 70” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

PLACE TV BEHIND THE STOPPER

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT

PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS.

NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT. TO

AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF THE UNIT; THE BASE OF THE

TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE UNIT WITHOUT

OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS

OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL

OFF OR BREAK THE UNIT, CAUSING POSSIBLE

SERIOUS INJURY.

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw Cam Bolt into the pre-drilled small holes on panel. Connect both panels together; making

sure Cam Bolt goes into pre-drilled hole on the end of panel with Cam Lock.

2. Insert Cam Lock into pre-drilled large hole on panel. Make sure arrow on Cam Lock is pointed toward

Cam Bolt.

3. Once Cam Bolt is connected inside Cam Lock, take a Phillips screwdriver and tighten Cam Lock

clockwise.

4. Plug Cam Cap into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

FINAL

1 2 43

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Center Shelf (Qty. 1) C- Bottom Panel (Qty. 1)

D- Bottom Front Molding (Qty. 1) E- Bottom Back Stretcher (Qty. 1) F- Left Lower Side Panel (Qty. 1)

G- Right Lower Side Panel (Qty. 1)

H- Left Lower Partition Panel (Qty. 1)

I- Middle Left Stile (Qty. 1)

J- Right Lower Partition Panel K- Middle Right Stile L- Middle Crossbar Assembly

(Qty. 1)

(Qty. 1) (Qty. 1)

M- Upper Side Panel (Qty. 2)

N- Upper Partition Panel (Qty. 1) O- Left Door (Qty. 1)

P- Right Door (Qty. 1)

Q- Adjustable Shelf (Qty. 2)

R- Upper Back Panel (Qty. 1)

S- Lower Back Panel (Qty. 2)

T-Top Front Stretcher

(Qty. 1)

U- Stop Rail (Qty. 1)

Parts and Hardware List

Fireplace Insert (Qty. 1) Remote Control with Battery (Qty. 1)

(1) Cam Lock

(2) Cam Bolt

(3) M8 x 30 mm Wood Dowel

(Qty. 43+2 extra) (Qty. 43+2 extra) (Qty. 43+2 extra)

(4) M3.5 x 12 mm Flat Head Screw (5) M4 x 25 mm Screw (6) Rubber Bumper

(Qty. 12+1 extra) (Qty. 6+1 extra) (Qty. 4+1 extra)

(7) M4 x 50 mm Wood Screw (8) M3.5 x 15 mm Washer Head Screw (9) Straight Metal Bracket

(Qty. 4+1 extra) (Qty. 38+1 extra) (Qty. 2)

(10) Shelf Support (Qty. 8+1 extra) (11) Angle Metal Bracket (Qty. 2) (12) Floor Leveler (Qty. 2)

(13) Cam Lock Cover (14) L-shaped Metal Bracket (15) M4 x 12 mm Pan Head Screw

(Qty. 30+1 extra)

(Qty. 2) (Qty. 2+1 extra)

(16) Handle and Back Plate (Qty. 2) (17) Handle Bolt (Qty. 2) Glue (Qty. 1)

Touch-up Pen (Qty. 1) Tipping Restraint Hardware Kit (Qty. 2)

(Included in plastic bag)

Tools required: Phillips screwdriver and hammer (not provided).

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), Lower Side

Panels (F and G) and Bottom Panel (C) using a Phillips screwdriver, as shown in the illustration.

Cam Bolt

(20 used in this step)

②

Assembly Instructions

3. Securely screw the Cam Bolts (2) into the designated small holes on the Center Shelf (B) and the

Partition Panels (J and H) as shown.

Cam Bolt

(17 used in this step)

②

Assembly Instructions

4. Insert two Wood Dowels (3) into the inner holes of the Middle Crossbar Assembly (L). Tap it in with a

rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.

5. Align the drilled holes on the Center Shelf (B) with the inserted Wood Dowel (3) on the Middle

Crossbar Assembly (L), and then press them together. Attach the Middle Crossbar Assembly (L) in

place by engaging three Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).

Wood Dowel

(2 used in this step)

③

Cam Lock

(3 used in this step)

①

Assembly Instructions

6. Align and attach the Middle Left Stile (I) to the Left Lower Partition Panel (H) with two 30 mm Wood

Dowels (3) and three Cam Locks (1).

7. Repeat the same procedure to combine the Middle Right Stile (K) with the Right Lower Partition Panel

(J).

Wood Dowel

(4 used in this step)

③

Cam Lock

(6 used in this step)

①

Assembly Instructions

8. Align and attach the Bottom Front Molding (D) to the Bottom Panel (C) by using three Wood Dowels

(3) and four Cam Locks (1).

9. Repeat the same procedure to attach the Bottom Back Stretcher (E) to the Bottom Panel (C).

Wood Dowel

(6 used in this step)

③

Cam Lock

(8 used in this step)

①

Tabla de contenidos

Idiomas:

Otros manuales de Chimenea de interior de Whalen

Whalen

Whalen Millstead WSF60MS26GAO Manual de usuario

Whalen

Whalen Windham Manual de usuario

Whalen

Whalen MNFP52EW26CA Manual de usuario

Whalen

Whalen WSF42OW23W Manual de usuario

Whalen

Whalen WSF61DL26C-AC Manual de usuario

Whalen

Whalen Linwood MNFP48LW23IO Manual de usuario

Whalen

Whalen Menards Barston WS03060726 Manual de usuario

Whalen

Whalen Shelby WSF72SY26C Manual de usuario

Whalen

Whalen WS3060926FP Manual de usuario

Whalen

Whalen Glenmore WS03061226 Manual de usuario

Whalen

Whalen WMFP31EC-1 Manual

Whalen

Whalen WS3062426FP Manual de usuario

Whalen

Whalen FP32EC23I-1BC Manual de usuario

Whalen

Whalen Evanston MNFP60ES26GA Manual de usuario

Whalen

Whalen WH300-26C2D-RGBM Manual de usuario

Whalen

Whalen SUMCMF-23 Manual de usuario

Whalen

Whalen Middleton WSF32WV23-DB Manual de usuario

Whalen

Whalen Kellum WMFP48EC-26GR Manual de usuario

Whalen

Whalen WSLWFP54-6 Manual de usuario

Whalen

Whalen Farmstead WSF60FM23R-AO Manual de usuario

Whalen

Whalen Bookcase Media Fireplace Manual de usuario

Whalen

Whalen MNFP60PV26WT Manual de usuario

Whalen

Whalen Ashton MNFP54AS-18 Manual de usuario

Whalen

Whalen WMFP41AE-13 Manual de usuario

Manuales populares de Chimenea de interior de otras marcas

Brigantia

Brigantia 35-DVRS31N-2 Manual del propietario

Nordpeis

Nordpeis Bergen Manual de usuario

Superior

Superior BCT2536TMN Manual de usuario

Quadra-Fire

Quadra-Fire 5100I-GD-B Manual de usuario

Renaissance

Renaissance RUMFORD 1000 Manual de usuario

Lacunza

Lacunza IV-800 Manual de usuario

Baxi

Baxi 940 Instrucciones de uso

Dru

Dru Maestro 60/2 Tall RCH Manual de usuario

Diamond Fireglass

Diamond Fireglass SS-O22 Manual de usuario

HearthStone

HearthStone Windsor Bay 8830 Manual de programación

Napoleon

Napoleon ASCENT B42 Manual de usuario

Enviro

Enviro E33GI Manual de usuario

Smeg

Smeg L30 FABE Instrucciones de montaje

KEDDY

KEDDY K700 Manual de usuario

Godin

Godin 3451 Manual de usuario

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manual de usuario

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manual de usuario

Desa

Desa CCFPDFT Manual de operación