Wave W10 Manual de usuario
WAVE w10 Swimmer Safety System
USER GUIDE
v0721-1.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of1 27
IMPORTANT. Please read this guide
thoroughly before using your w10 system.
Design subject to change.
TABLE OF CONTENTS
Safety Instructions …………………………………………………………………. 3
Warnings/Cautions ………………………………………………………………… 3
Compatibility ……………………………………………………………………….. 5
Legal Information ………………………………………………………………….. 5
Welcome … ………………………………………………………………………… 6
What’s in the Box ….……………………………………………………………….. 7
Powering and Charging Your w10 Hub …………………………………………. 8
WAVE w10 Management App ……………………………………………………. 9
Using the App ……………………………………………………………………… 10
Using Wearables …….………………………………………………………………17
Using Your w10 ..……………..…………………………………………………….. 20
Troubleshooting ……………………………………………………………………. 23
Customer Support …………………………………………………………….…… 25
Water Safety Information …………………………………………………………. 26
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of2 27
Important Safety Instructions
1. These instructions are accurate as of date of release and may be updated as needed. Always check
the WAVE website, www.wavedds.com/support for the most recent version which may contain
important updates.
2. Heed all warnings.
3. Always follow these instructions.
4. Clean only with a damp clean cloth. Do not use cleaning products containing ammonia.
5. Do not block any ventilation openings.
6. Do not install near any heat sources such as radiators, stoves, or other apparatus that produce heat.
7. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the equipment.
8. Only use attachments/accessories specified, approved or authorized by WAVE SYSTEMS INC.
9. Use only with the cart, stand, tripod, or bracket specified by WAVE SYSTEMS INC or sold with the
equipment. When a cart is used, use caution when moving the cart/equipment combination to avoid
injury from tip-over.
10. Unplug this equipment during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified personnel. Servicing is required when the equipment has been
damaged in any way, liquid has been spilled or objects have fallen into the equipment, does not
operate normally, or has been dropped.
WARNINGS/CAUTIONS
IMPORTANT! WAVE SYSTEM products are designed to supplement and NEVER
replace responsible human supervision of swimmers. Only another human being can
investigate, intervene and rescue a potential drowning victim if necessary. NEVER LET
ANYONE SWIM ALONE OR UNATTENDED REGARDLESS OF AGE OF SWIMMING
ABILITY LEVEL OR EXPERIENCE.
• Contains small parts which may be a choking hazard.
• Equipment may contain magnetic material. Consult your physician on whether this might affect an
implantable medical device.
• To reduce the risk of fire or electrical shock, do NOT expose the AC Charging/Power Adapter to
dripping or splashing, and do not place objects filled with liquids on or near the product.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of3 27
• Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as
lighted candles, on or near the product.
• Do NOT make unauthorized alterations to this product.
• Do NOT use unauthorized products and accessories with this equipment.
• Do NOT use AC charging/power adapters other than the unit included with this equipment.
• Where the AC mains plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
• Internal batteries provided with this product may present a risk of fire or chemical burn if mishandled.
• If a battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made,
seek medical advice immediately.
• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire
or the like).
Avoid leaving equipment in direct sunlight on extremely hot days (100ºF +).
Avoid direct water spray at equipment.
Dispose of used batteries properly following local regulations. Do not incinerate.
NOTE: Appropriate compliance protocols for this equipment in process as of the time of this writing.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for
Changes or modifications not expressly approved by WAVE SYSTEMS INC may void the user’s authority
to operate this equipment.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of4 27
Compatibility
Only WAVE SYSTEM INC approved, recommended or authorized products may be used with this
equipment. Use of any non-authorized products may void your warranty.
Legal Information
Security Information: This product is capable of receiving automatic security updates from WAVE. To
receive automatic security updates, you must complete the product setup process in the WAVE
Management app and connect the product to the Internet. If you do not complete the setup process,
you will be responsible for installing security updates that WAVE makes available.
By using WAVE SYSTEM products you acknowledge and agree that WAVE products are
NOT intended and will NOT be used as a replacement or substitute for responsible and
diligent human supervision of swimmers and non-swimmers around water. Furthermore
you agree to hold WAVE SYSTEMS INC., its partners, affiliations, manufacturers,
suppliers and vendors harmless for any injuries or damages, physical or otherwise, as a
result of the correct or misuse of WAVE SYSTEM INC products.
Not for use while diving or snorkeling.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Wi-Fi is a registered trademark of Wi-Fi Alliance®
WAVE Systems Inc: 1-203-429-4636
© WAVE SYSTEMS INC. v0721.1 No part of this work may be reproduced, modified, distributed or
otherwise used without prior written permission.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of5 27
WELCOME.
Congratulations and thank you for your purchase of the w10 Swimmer System! You have taken a very
wise initiative to dramatically improve the safety of your loved ones, friends and guests around water.
The WAVE w10 uses proven tracking technologies to
accurately determine the real time status of your
swimmers each time they enter the water, alerting you or
caregivers immediately if a swimmer remains underwater
beyond an acceptable period of time. The w10 will also
immediately alert you should a non-swimmer enter the
water as well.
WAVE is simple to use, deploys quickly, and is portable.
It can work in all water types including lakes and other
natural bodies of water.
To be effective, the WAVE w10 must be used properly each and every time people are in or near the
water. All swimmers, regardless of age or swimming ability, should be using WAVE wearables, and doing
so should be considered as normal as wearing seat belts when in a car or wearing a helmet while cycling.
While we have worked hard to make WAVE as reliable as possible, no technology is a perfect solution in
and of itself. The system should never be used as a replacement for diligent responsible human
supervision. Only another human being can intervene and save a potential drowning victim. Therefore
never let anyone swim alone regardless of their age or swimming ability. Never rely solely on the
w10 for supervision of people in or around water.
Used along with common-sense safety measures, we are confident that the w10 will provide you and
your family with years of safe and enjoyable swimming.
The WAVE Team
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of6 27
Optional accessories may be depicted. Design subject to change.
WHAT’S IN THE BOX
• 1 x WAVE w10 Swimmer Safety System Hub
• 1 x Wall Mount
• 1 x Charging/Power Adapter
• 1 x Power Cord
•Optional Goggle Clip Wearables*
•Optional BuddyTag™ Wearables*
• Optional Tracker Wearables*
*Included quantities may depend on your specific order and/or may be shipped separately.
NOTE: If any item is missing please contact Customer Support at 1-203-429-4636 or [email protected].
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of7 27
GOGGLE CLIPS*
TRACKERS
BUDDYTAGS*
QUICK START GUIDE
POWER CORD
AC ADAPTER
WALL MOUNT
SYSTEM HUB
POWERING & CHARGING YOUR w10 Hub
The w10 Hub may be powered via the internal battery
or the AC Charging/Power Adapter. The standard
battery will last up to 6 hours of typical use*.
Fully charging the battery normally takes a few hours.
After this initial set up process you may view the
Hub’s battery level at any time by using the WAVE
Management App (see below).
START UP PROCESS
Press the Power Button to initiate the startup process. After
a few seconds the LED on the Power Button will glow green, the Strobe will light up in a chase
pattern, and depending on your software version installed, a tone may sound. Once the start
up process is complete (typically up to 2 minutes), the Strobe will begin a slow fade in/fade out
pattern to indicate that the Hub is on.
POWER DOWN PROCESS
Press and hold the power button down for approximately 5 seconds to power down the w10.
The green LED on the Power Button will turn off. Depending on the system software version
installed in your w10, it may sound a tone and the Strobe will light in a pattern during the shut
down process.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of8 27
Power/Charging Port
Power Cord
AC Charging/
Power Adapter
Power
Button
Strobe
* Your actual battery life may vary depending on system alerts, notifications and environmental factors.
WAVE w10 MANAGEMENT APP
The WAVE w10 Management App is a simple to us app that enables you to monitor
the status of the Hub, wearables and other accessories. The app may be used on
smartphones and tablets (recommended).
Note: Although recommended, it is not necessary to have the WAVE app open or
active while using your w10. The system will monitor your swimmers and non-
swimmers using the most recent settings.
SETTING UP THE APP
1. Power on the w10 and allow the Hub to fully complete the Start Up Process.
2. Open your device’s settings and go to the WiFi settings page.
3. Look for the WAVE wireless hotspot w10-ap-1539d6 to appear.
4. Select and join the WAVE wireless network using the password “WaveNetwork”.
5. Open your device’s web browser program (Chrome, Safari, etc.).
6. Enter the following URL in the address bar: http://start.wavew10.com:3001 or http://
192.168.8.1:3001, if the first does not work.
You should be automatically redirected to the WAVE management page, but if that
does not happen after a few minutes, please restart the Hub.!To do so, press the power
button for 5 seconds and release it.!Wait 30 seconds, then turn the Hub on again by
pressing the power button again.!Once the Hub is up and running, open your device’s
browser and go to http://w101539d6.hub.wavedds.net to access the WAVE system
page directly. If it does not appear after a few seconds, reload/refresh the page.
Note: Your device must have WiFi activated and be on the WAVE wireless network to
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of9 27
connect to and manage the w10. Depending on how your device is configured, its
access to the Internet may be interrupted while on the WAVE network.
USING THE APP
Note: We often release software updates to improve user experience. As a result, your
version of the Management App may look different and/or have different functionality
from this guide. Please make sure to check your email for update notices from WAVE,
and return to this guide for updated versions.
MONITOR PAGE
This is the page that will appear when the app is first opened. This page enables you to
view the general status of both the system and all enabled wearables on one screen
1. Hub Battery Level. Provides the current internal battery level. Changes to a charging icon
when plugged into wall power.
2. Wearables.Number of wearables that the system is currently monitoring.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of10 27
1
2
3
4
5
6
7
8
10
11
9
Smith Family Pool
Tabla de contenidos
Otros manuales de Sistema de seguridad de Wave
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario