Watts MILUX Manual de usuario

The MILUX Chrono-thermostat is a programmable digital thermostat able to control and regulate directly

your central heating (Electric, Gas, Oil) or cooling system.

It’s weekly programmable function enables power savings according to your every day life.

Features

• 7 days program ( except for daily version)

• 9 Built-in programs

• 4 User programs

• Program graphic display

• Room temperature and Time display

• Comfort / Reduced / Anti-freeze temperatures

• Temporary temperature override

• Automatic or Manual operation

• Holiday function

• Select HOT or COLD operation

• Easy wiring (2 conductor wire)

• Keypad lock function (child safety)

• Battery powered to prevent loss of program

and time during power cuts

• Battery weakness monitoring

• Battery replacement without loss of program

• Reset function

Measured temperature precision 0.1°C (or 0.2°F)

Set temperature precision 0.5°C (or 0.5°F)

Set temperature range in comfort & reduced : 5°C – 35°C (or 41°F – 95°F)

in anti-freeze : 0,5°C – 10°C (or 33°F – 50°F)

Regulation characteristics - regulation speed: 7.5 cycle per hour (8 minutes cycle)

- regulation band: 2°K of proportional band (adjusted power)

Driving element 8A RELAY (with heater and cooling devices contacts)

Connection 3 points screw connector on the rear part of the box

Batteries 3x LR6 AA 1.5V batteries

Installation & Wiring

1 Place the MILUX thermostat (A) on a plain wall away from windows and doors and not to close to the heater.

Put the connection wires (B) thru the back hole of the rear part. Use the screws (C) to mount the rear part on the wall.

2 Connect the wires to the connector (D).

Follow the connection diagram

3 Remove the plastic isolator on the batteries to power up the

MILUX. Then close the MILUX as explained in step 3 of

the batteries replacement (last page)

4 Adjust the time and follow the QUICK START instructions

DIM

Instructions

Quick Start

With keys Slide the frame inside the top MENU to change operating mode (see Modes description)

With keys change set temperature or adjust what is blinking on the screen.

With key switch between actual room temperature and set temperature or validate an adjustment.

First go to set clock and adjust time (use to adjust minutes, press OK, adjust hours, OK,adjust days, OK )

Go to program menu and select built-in week program to (or edit user program to , see

below)

Go to comfort mode and adjust comfort temperature required with keys (Default comfort temp. is 21°C)

Go to reduced mode and adjust reduced temperature required with keys (Default reduced temp. is 17°C)

Finally go to automatic mode. Your MILUX Chrono-thermostat is now working and follows the program.

Modes Description

Manual COMFORT operating mode :

Force comfort temperature operation indefinitely or for a few hours or days (see Holiday function).

By pressing + or - key the comfort temperature start to blink and can be adjusted. If you wait a few seconds the actual

room temperature reappears. MILUX regulation will now follow comfort temp.

AUTOMATIC operating mode :

MILUX Chrono-thermostat will follow automatically the program according to the actual time.

By pressing +or -key you can override the current set temperature until the next change in the program.

The segment will lit up. Use + / - keys to adjust the temporary required temperature.

At the next program change the will disappear and the program continues without any alteration.

Manual REDUCED operating mode :

Force reduced temperature operation indefinitely or for a few hours or days (see Holiday function).

By pressing + or - key the reduced temperature start to blink and can be adjusted. If you wait a few seconds the actual

room temperature reappears. MILUX regulation will now follow reduced temp.

Manual ANTI-FREEZE operating mode :

(only for Heating systems, HOT operation selected)

Force anti-freeze operation indefinitely or for a few hours or days (see Holiday function).

By pressing + or - key the anti-freeze temperature starts to blink and can be adjusted. If you wait a few seconds the

actual room temperature reappears. MILUX will keep temperature above freezing.

OFF mode: Use this mode if your Heating or cooling installation needs to be turned OFF.

MILUX Chrono-thermostat will switch off the installation and then switch itself OFF (blank screen).

User programs are saved, time is kept running and battery consumption becomes very low.

Any key will wake up the MILUX. The OK / key displays the actual room temperature.

DANGER : IN THIS MODE YOUR INSTALLATION CAN FREEZE because the MILUX is stopped.

Set CLOCK menu :

Use this menu to adjust the MILUX clock to the actual time.

use to Press

adjust minutes OK

use to Press

adjust hours OK

use to Press

adjust days OK

PROGRAM menu : By pressing + or - key the Program number start to blink,

If you select a built-in program to and press OK this program will be followed in

If you select an user program to and press OK you will enter the USER PROGRAM EDITION.

Special Features

Battery Replacement

Press on then left side

button and

pull the front panel to

remove it.

You now have access to

the

batteries.

Replace the three LR6 AA

1.5V

batteries with new ones

IMPORTANT: You have 1

minute to

change the batteries

To close the MILUX,

Place the front panel in front of

the rear part. Insert the three

contacts in the connector holes.

Then push the front panel while

keeping it parallel to the rear part.

You can help the button to click

pressin

sli

htl

on it.

Tabla de contenidos

Otros manuales de Termostato de Watts

Watts

Watts tekmar 562 Manual de usuario

Watts

Watts Milux Star Manual de usuario

Watts

Watts tekmar Invita Instrucciones de instalación

Watts

Watts W561 Manual de usuario

Watts

Watts BT-DRF Manual de usuario

Watts

Watts SunStat Dial Manual de usuario

Watts

Watts Wattstemp 740 Manual de usuario

Watts

Watts BT-TH02 RF Manual de usuario

Watts

Watts BT-DPRF-02 Manual de usuario

Watts

Watts Tekmar WiFi Thermostat 561 Manual de usuario

Watts

Watts Tekmar 563 Manual de usuario

Watts

Watts tekmar 562 Manual de usuario

Watts

Watts WS-C321 Series Manual de usuario

Watts

Watts tekmar 518 Manual de usuario

Watts

Watts Tekmar 563 Series Manual de usuario

Watts

Watts Dual Sensing Thermostat Guía

Watts

Watts Vision BT-D03 RF Manual de usuario

Watts

Watts BT DP-01 Manual de usuario

Watts

Watts Tekmar WiFi Thermostat 561 Manual de usuario

Watts

Watts Tekmar Invita 564 Manual de usuario

Watts

Watts FloorStat 500650-120CS Manual de usuario

Watts

Watts FloorStat 500650-120CS Manual de usuario

Watts

Watts WTC-ES Manual de usuario

Watts

Watts tekmar 560 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario