Volt VPL-1006 Manual de usuario

VOLT®Low Voltage Landscape Lighting

VOLT® Coachman LED Path & Area Light

VPL-1006

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

reserved. [email protected] • 813.978.3700

- 1 -

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT®Coachman LED Path & Area Light

VPL-1006

Important: Please Read Before Installation

Important Safety Instructions

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 2 -

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the warranty.

These instructions do not intend to cover all variations in installation, operation

maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

[email protected] • 813.978.3700

Package Contents

A. (1) Fixture

B. (1) Stem

Additional Parts Required (sold separately)

A. (1) LED SCB Lamp

Product Dimensions

62.25”

TOP VIEW

11”

9.5”

- 3 -

C. (1) Ultra Realistic LED Moving

Flame Bi-Pin Candle

D. (1) 17” Stake

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 4 -

VOLT®Coachman LED Path & Area Light

VPL-1006

Remove the Hat

Hat

Set

Screw

Hat Mount

Stem

Inner Lens

Remove the hat from the stem by

removing the set screws from the

hat mount.

Install LED Lamp

Insert the lamp with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle

bulb.

Lower

Socket

LED

SCB

LAMP

Hat

[email protected] • 813.978.3700

- 5 -

Reinstall Hat

LED SCB

Lamp

Hat

Set

Screw

Hat

Mount

Stem

Inner Lens

After installing the LED lamp into

the socket, place the hat back

onto the mount at the top of the

stem.

Secure both pieces in place

with the set screws previously

removed. Hand tighten until

snug.

Remove Upper Part of Hat

Remove the upper part of the hat

by loosening the set screws.

Lower Hat

Upper Hat

Set Screw

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 6 -

VOLT®Coachman LED Path & Area Light

VPL-1006

Install LED Bi-Pin Candle

LED Bi-Pin

Candle

Upper

Socket

Insert Ultra Realistic LED

Moving Flame Bi-Pin Candle.

CAUTION: Do not exceed

maximum wattage marked

on luminaire label.

Reinstall Upper Part of Hat

Place the upper part of the hat

back onto the lower part of

the hat and secure with the set

screws previously removed. Hand

tighten until snug.

Upper

Hat

Set Screw

[email protected] • 813.978.3700

- 7 -

Install Stem

Extension

Stem

Supply

Wires

Pass the supply wires through the

stem and extension. Then thread

the extension onto the stem. Hand

tighten until snug.

www.voltlighting.com

- 8 -

Stake

Stabilizer

Grid

Conduit

Ground Level

Install Stake and Conduit

Dig a hole in the ground for the conduit runs and the stake. Install

the conduit. Slide the stabilizer grid onto the stake and secure with

the screws. Place the stake over the conduit runs. Backll against

the mounting stake.

Remove Cap from Stake

Remove the cap from the

stake by loosening the set

screws.

Set Screw

Cap

Stake

Extension

Fixture Wires

Cap

Install Cap to Fixture

Thread the cap onto the xture body and

hand tighten until snug.

Wire Connection and Fixture Installation

Set Screw

Cap

Stake

Wire Connector

Supply Wires

Fixture

Wires

[email protected] • 813.978.3700

- 9 -

Strip both leads from the luminaire pigtail. Using two wire

connectors (sold separately), connect the leads from the

luminaire to the main supply cable leads.

www.voltlighting.com

- 10 -

Otros manuales para VPL-1006

Otros manuales de Iluminación de paisajes de Volt

Volt

Volt VFL-4027 Manual de usuario

Volt

Volt VWL-705-BBZ Manual de usuario

Volt

Volt 510 Series Manual de usuario

Volt

Volt VSPL-1045-BBZ Manual de usuario

Volt

Volt All-Star VAL-1814-40-BBZ Manual de usuario

Volt

Volt VPL-1012-BBZ Manual de usuario

Volt

Volt VAL-2101-0-BBZ Manual de usuario

Volt

Volt VPL-1050-4-BBZ Manual de usuario

Volt

Volt VAL-2103-0-BBZ Manual de usuario

Volt

Volt 3601 Series Manual de usuario

Volt

Volt VAL-180 Manual de usuario

Volt

Volt VDL-6007 Manual de usuario

Volt

Volt VHS-6720-X-BBZ Manual de usuario

Volt

Volt RGBW Max All-Star VAL-2045-ABK Manual de usuario

Volt

Volt VAL-2001 Series Manual de usuario

Volt

Volt VPL-1041-4-BBZ Manual de usuario

Volt

Volt VAL-2043-LI-ABK Manual de usuario

Volt

Volt VSPL-9001-25-BBZ Manual de usuario

Volt

Volt STK-17LI Series Manual de usuario

Volt

Volt VHS-6720-X-BBZ-R1 Manual de usuario

Volt

Volt VHS-67 Series Manual de usuario

Volt

Volt VUL-6802-25-BBZ Manual de usuario

Volt

Volt VFL-4501-4-BBZ Manual de usuario

Volt

Volt Top Dog Scotty Mini Twinnovator Brass Manual de usuario

Manuales populares de Iluminación de paisajes de otras marcas

Intex

Intex SL1006 Manual de usuario

LED Group

LED Group ROBUS R2IN13W Manual de usuario

Patriot Lighting

Patriot Lighting 343-1484 Manual de usuario

Hess

Hess SERA G: SERA S Manual de usuario

LIGMAN

LIGMAN JET 44 Manual de usuario

LIGMAN

LIGMAN MALTA 1 Manual de usuario

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manual de usuario

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manual de usuario

Saxby Lighting

Saxby Lighting Islay 68784 Manual

LIGMAN

LIGMAN EU-10016-3 Manual de usuario

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manual de usuario

LIGMAN

LIGMAN KI-60475 Manual de usuario

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manual de usuario

Malibu Boats

Malibu Boats CL905K Manual de usuario

LIGMAN

LIGMAN NYB-30161 Manual de usuario

LIGMAN

LIGMAN SI-80021 Manual de usuario

Malibu Boats

Malibu Boats CM110P Manual de usuario

U.S.T.E.

U.S.T.E. VISTA 8202 Manual de usuario