Volt All Star Mini Twinnovator Manual de usuario

VOLT®Low Voltage Landscape Lighting

VOLT® All-StarTM Mini Twinnovator Path & Area Light

VPL-3026 Series

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

reserved. [email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

VOLT®All StarTM Mini Twinnovator

VPL-3026 Series

Important: Please Read Before Installation

Important Safety Instructions

INSTALLATION INSTRUCTIONS

www.voltlighting.com

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.voltlighting.com or call 1-813-978-3700.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

- 2 -

[email protected] • 813.978.3700

Package Contents

A. (1) Fixture Body

B. (2) Stake

Product Dimensions

Parts Required

A. (2) MR11 Lamps

B. (1) Stake Cover (optional)

6”

2.7”

26.2”

4.5”

3.2”

14.65”

- 3 -

www.voltlighting.com

Install Lamp

MR11 Lamp

Socket Insert the lamp with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire

label.

NOTE: DO NOT touch lamp with

bare hands. Use soft cloth to

handle lamp.

Install Stake

Board

Stake

Soil

Ground

Determine the desired location for

mounting the xture. Hammer the stake

into the ground until ange of stake is

ush to grade. To avoid damage to the

stake, place a board on top of the stake

while hammering.

NOTE: If the ground is hard and the

stake is dicult to install, make a

crosscut in the ground using a at

shovel.

Remove Shield and Glare Guard

Glare Guard

Shield

Set Screw

Fixture Body Loosen the set screw and remove

the glare guard from the shield.

Remove the shield from the

xture.

INSTALLATION INSTRUCTIONS

- 4 -

VOLT®All StarTM Mini Twinnovator

VPL-3026 Series

[email protected] • 813.978.3700

Install Shield and Glare Guard

Glare Guard

Shield

Set Screw

Fixture Body Place the shield over the lamp and

thread onto the xture. Attach the

glare guard back onto the shield

and secure with the set screw.

Tighten until snug.

- 5 -

Install Fixture to Stake

Pigtail

Fixture

Stake

Cover (sold

separately)

Wireway Slot

Clear away an area in the ground

at the wireway slot on top of the

stake. Align the wireway slot of

the stake cover and the stake.

Lay the luminaire pigtail into

the wireway slot and attach the

xture onto the stake.

www.voltlighting.com

Adjust Angle of Fixture Body

Allen Wrench Using an Allen Wrench, loosen the

adjustment screws and modify

the xture bodies to the desired

angles. Then tighten the

adjustment screws.

Wire Connections

Pigtail

Main Supply Cable

Wire Connectors

Strip both leads from the luminaire pigtail. Using two wire

connectors (sold separately), connect the leads from the

luminaire to the main supply cable leads.

Adjustment Screw

INSTALLATION INSTRUCTIONS

- 6 -

VOLT®All StarTM Mini Twinnovator

VPL-3026 Series

Install/Replace Lamp

Loosen the set screw on glare guard, remove the glare guard and the

shield to expose the lamp. Replace it with the correct wattage and

type marked on the xture label. Then reinstall the shield and glare

guard and tighten with the set screw.

IMPORTANT: Halogen lamps must be protected from moisture and

dust at all times. Always reinstall the shield and glare guard when

moved.

[email protected] • 813.978.3700

- 7 -

IS-VPL-3026-ver2.pdf

Specications and product details subject to change without notice.

reserved. [email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 8 -

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Iluminación de paisajes de Volt

Volt

Volt 310 Series Manual de usuario

Volt

Volt VFL-4501-4-BBZ Manual de usuario

Volt

Volt VDL-6008-4-BBZ Manual de usuario

Volt

Volt VWL-705 Manual de usuario

Volt

Volt 2-in-1 Tiki-Brass Torch Light Manual de usuario

Volt

Volt VSAC-PANEL1-SBK Manual de usuario

Volt

Volt RGBW BuddyPro VHS-6725-0-BRB Manual de usuario

Volt

Volt VAL-2000-4-BBZ Manual de usuario

Volt

Volt VWL-7125-BBZ Manual de usuario

Volt

Volt VAL-2043-LI-ABK Manual de usuario

Volt

Volt VHS-6719-BBZ Manual de usuario

Volt

Volt VPL-1048-4-BBZ Manual de usuario

Volt

Volt VPL-3024-BBZ Manual de usuario

Volt

Volt VUL-6804-25-BBZ Manual de usuario

Volt

Volt LPL-PLKIT Manual de usuario

Volt

Volt VFL-4007-4-BBZ Manual de usuario

Volt

Volt VWL-703-BBZ Manual de usuario

Volt

Volt VFL-4601-4-BBZ Manual de usuario

Volt

Volt VAL-2101-0-BBZ Manual de usuario

Volt

Volt Top Dog Scotty Mini Twinnovator Brass Manual de usuario

Volt

Volt VDL-600 Series Manual de usuario

Volt

Volt VSPL-9001-25-BBZ Manual de usuario

Volt

Volt Atom Mini VAL-2009-4-BBZ Manual de usuario

Volt

Volt VDL-6009-4-BBZ Manual de usuario

Manuales populares de Iluminación de paisajes de otras marcas

Intex

Intex SL1006 Manual de usuario

LED Group

LED Group ROBUS R2IN13W Manual de usuario

Patriot Lighting

Patriot Lighting 343-1484 Manual de usuario

Hess

Hess SERA G: SERA S Manual de usuario

LIGMAN

LIGMAN JET 44 Manual de usuario

LIGMAN

LIGMAN MALTA 1 Manual de usuario

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manual de usuario

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manual de usuario

Saxby Lighting

Saxby Lighting Islay 68784 Manual

LIGMAN

LIGMAN EU-10016-3 Manual de usuario

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manual de usuario

LIGMAN

LIGMAN KI-60475 Manual de usuario

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manual de usuario

Malibu Boats

Malibu Boats CL905K Manual de usuario

LIGMAN

LIGMAN NYB-30161 Manual de usuario

LIGMAN

LIGMAN SI-80021 Manual de usuario

Malibu Boats

Malibu Boats CM110P Manual de usuario

U.S.T.E.

U.S.T.E. VISTA 8202 Manual de usuario