Vivo STAND-LAP1F Manual de usuario
Aluminum Laptop Floor Stand
Instruction Manual
SKU: STAND-LAP1F
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-lap1f
2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME PARTS INCLUDED MAY NOT BE USED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF THE STAND
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT
SUPERVISION IS REQUIRED.
T-A x1)
Allen Wrench Set
S-B x1)
M10x25mm
S-C x1)
M5x16mm
S-A x2)
M6x10mm
PACKAGE CONTENTS
A (x1)
Base
D (x1)
Arm
C (x1)
Pole
I (x1)
Laptop Tray
F(x1)
Laptop Hinge
G (x1)
Tablet Hinge
H (x1)
Tablet Holder
E x1)
Pole Cap
B (x1)
Le Foot
3
ASSEMBLY STEPS
STEP 1
Assemble the Le Foot (B) to the Base (A) using M6x10mm Bolts (S-A). Tighten with the 4mm Allen
Wrench (T-A).
STEP 2
Insert Pole (C) into the base assembly, making sure the slot is facing towards the back. Secure the pole
using M10x25mm Bolt (S-B) and the 6mm Allen Wrench (T-A).
S-B
C
4
STEP 2 (Continued)
STEP 3
Slide the Arm (D) onto Pole (C), loosening the thumbscrew first if needed. Press the Pole Cap (E) into
the top of Pole (C). Tighten thumbscrew at desired height for Arm (D).
Tighten the rear set screw using the 4mm Allen Wrench (T-A).
4mm Allen Wrench
C
E
D
Thumbscrew
5
STEP 4
OPTION A: Laptop Tray
Remove the pre-installed bolt and white plastic spacer from the Laptop Hinge (F) using the 5mm Allen
Wrench (T-A). Insert the hinge swivel joint into the top of the Arm (D), making sure the tabs in the
black plastic bushing fit into the slots in the hole. Secure using the previously removed spacer and bolt
with the 5mm Allen Wrench (T-A). Slide the Laptop Tray (I) into the Laptop Hinge (F) until the latch
engages. Adjust the tilt joint if necessary using the 5mm Allen Wrench (T-A), then pull out on the sides
of the tray and place the laptop computer into the tray.
F
D
I
White Spacer
Bolt
F
Black Bushing
Tilt Joint Adjustment
6
STEP 4 (Continued)
OPTION B: Tablet Holder
Remove the bolt and white plastic spacer from the Tablet Hinge (G) using the 5mm Allen Wrench (T-
A). Insert the hinge swivel joint into the top of the Arm (D), making sure the tabs in the black plastic
bushing fit into the slots in the hole. Secure using the previously removed spacer and bolt with the
5mm Allen Wrench (T-A). Install the Tablet Holder (H) using the M5x16mm Bolt (S-C) with the 4mm
Allen Wrench (T-A). Adjust the tilt joint if necessary using the 4mm Allen Wrench (T-A), then pull out
the holder clips and place the tablet into the Tablet Holder (H).
D
G
S-C
H
White Spacer
Bolt
Black Bushing
Tilt Joint Adjustment
7
Adjust as Desired
°
Tilt
+90 to -90
°
°
Swivel
360
°
Swivel
220
Max Extension: 19.5”
LAST UPDATED: 11/03/2021
REV 1.2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Tabla de contenidos
Otros manuales de Rack y soporte de Vivo
Vivo
Vivo DESK-V000K-M1 Manual de usuario
Vivo
Vivo STAND-MIC02 Manual de usuario
Vivo
Vivo PT-SD-CP01A Manual de usuario
Vivo
Vivo STAND-V002LG Manual de usuario
Vivo
Vivo STAND-V004F Manual de usuario
Vivo
Vivo STAND-TV55T Manual de usuario
Vivo
Vivo DESK-V000ME Manual de usuario
Vivo
Vivo STAND-TV65A Manual de usuario
Vivo
Vivo DESK-SKIRT-60P Manual de usuario
Vivo
Vivo STAND V003M Manual de usuario
Vivo
Vivo STAND-V101N Manual de usuario
Vivo
Vivo DESK-V000K-M2 Manual de usuario
Vivo
Vivo STAND-V000B Manual de usuario
Vivo
Vivo STAND-V003D Manual de usuario
Vivo
Vivo STAND-V004TG Manual de usuario
Vivo
Vivo STAND V004M Manual de usuario
Vivo
Vivo STAND-V001M Manual de usuario
Vivo
Vivo MOUNT-V001A Manual de usuario
Vivo
Vivo STAND-TS38C-T Manual de usuario
Vivo
Vivo STAND-GM2BB Manual de usuario
