Vitek VTD-A4F/IWM Manual de usuario
black
VITEK
Alpha Mega Series
Indoor Dome
Cameras
• 1000 TV Lines of Resolution (1.39 MegaPixel)
• 1/2.9” Sony® CMOS Sensor
• Highly Advanced EN773E Digital Signal
Processor
• 3.6mm Fixed & 2.8-12mm Varifocal Lens
Options
• Available with 35 IR LEDs (120’ Range)
• Advanced OSD Functions: WDR, 3D DNR, DSS,
DIS, Sens-up, Motion Detection, Privacy
• Secondary Video Output (Cable Included)
• 3-Axis Mount for Optimum Viewing Angle
• 12VDC/24VAC Dual Voltage Operation
Table of ConTenTs
BOX CONTENTS / MOUNTING ACCESSORIES 2
AVAILABLE MODELS 3
VTD-A4F/IM INSTALLATION 4
VTD-A2812/IM INSTALLATION 5
VTD-AR2812/IM INSTALLATION 6
INSTALLATION TIPS 7
SETUP MENU 8
OSD OPERATION 9-19
DIMENSIONS 20
SPECIFICATIONS 21-23
NOTES 24-26
1
black
1) Alpha Mega Dome Camera
2) Mounting Accessories
3) Secondary Video Output Cable
4) This instruction Manual & Mounting Template
Self Tapping Screws
For attaching the housing base to a
solid surface.
Type #: Phillips ST4x30
Qty: 4 (2 screws - VTD-A4F/IM)
Secondary Video Output Cable
To be used with a service monitor for
adjusting
the angle, focus and zoom.
Qty: 1
BOX CONTENTS AVAILABLE MODELS / ACCESSORIES
1) Dome Camera
2) Mounting Accessories
3) This instruction Manual & Mounting Template
VTD-A4F/IB / VTD-A4F/IW
620TVL Indoor Color Dome Camera with Fixed Lens.
VTD-A2812/IB / VTD-A2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris Lens.
VTD-AR2812/IB / VT-AR2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris, IR
Corrected Lens & 35 IR LEDs.
BOX CONTENTS
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom.
Qty: 1
BOX CONTENTS AVAILABLE MODELS / ACCESSORIES
1) Dome Camera
2) Mounting Accessories
3) This instruction Manual & Mounting Template
VTD-A4F/IB / VTD-A4F/IW
620TVL Indoor Color Dome Camera with Fixed Lens.
VTD-A2812/IB / VTD-A2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris Lens.
VTD-AR2812/IB / VT-AR2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris, IR
Corrected Lens & 35 IR LEDs.
BOX CONTENTS
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom.
Qty: 1
boX ConTenTs
BOX CONTENTS / MOUNTING ACCESSORIES 2
AVAILABLE MODELS 3
VTD-A4F/IM INSTALLATION 4
VTD-A2812/IM INSTALLATION 5
VTD-AR2812/IM INSTALLATION 6
INSTALLATION TIPS 7
SETUP MENU 8
OSD OPERATION 9-19
DIMENSIONS 20
SPECIFICATIONS 21-23
NOTES 24-26
MounTing aCCessories
2
aVailable MoDels
3
VTD-A4F/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm
Dome - Ivory
VTD-A2812/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome - Ivory
VTD-AR2812/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome & 35 IR LEDs - Ivory
VTD-A2812/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome - Black
VTD-A4F/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm
Dome - Black
VTD-AR2812/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome & 35 IR LEDs - Black
black
VTD-a4f/iM insTallaTion
a
4
* See Installation Tips on page 7
VTD-a2812/iM insTallaTion
5
a
/ DC12V
DualPower
* See Installation Tips on page 7
black
a
/ DC12V
DualPower
6
VTD-ar2812/iM insTallaTion
* See Installation Tips on page 7
7
insTallaTion Tips
1.) Power Consumption - Amperage/Voltage
It is of utmost importance that the proper Voltage and Amperage is used when
applying power to your VITEK Alpha Series Dome Camera. They can be pow-
ered by either 12V DC or 24V AC (except for the model VTD-A4F/IM - 12V DC
only). Always use a UL Listed power transformer.
The Voltage must be measured at the camera location. It is very important that
the camera receives no less than the required Voltage or it will be “Starved”
and eventually die out. Cameras with Infrared LEDs require substantially more
Amperage than others so please refer to the Specications (page 21-23) for
the camera you are installing.
black
8
seTup Menu
9
osD operaTion
Please press joystick down
The Main Menu is displayed on monitor.
joystick
yellow
Push the joystick up or down to highlight the function you wish to change.
Settings can be made using the Joystick located on the rear of the camera.
Este manual sirve para los siguientes modelos
12
Tabla de contenidos
Otros manuales de Cámara de seguridad de Vitek
Vitek
Vitek VTC-EB15B Manual de usuario
Vitek
Vitek VTD-C13A Manual de usuario
Vitek
Vitek VTC-C680 Manual de usuario
Vitek
Vitek TRANSCENDENT VTD-HOCR2812-VB Manual de usuario
Vitek
Vitek TRANSCENDENT VTC-TNB42R5F2 Manual de usuario
Vitek
Vitek Transcendent VTC-TNB8RMA4 Manual de usuario
Vitek
Vitek VTD-TND8RFA4-2 Manual de usuario
Vitek
Vitek VTC-EB15B Manual de usuario
Vitek
Vitek VTC-BHOCR2812 Manual de usuario
Vitek
Vitek VTC-C574 Manual de usuario
Vitek
Vitek VTC-C661 Manual de usuario
Vitek
Vitek Alpha Mega Series Manual de usuario
Vitek
Vitek VTC-IRX36/3895 Manual de usuario
Vitek
Vitek VTC-TNT4RFS Manual de usuario
Vitek
Vitek Alpha VTD-A4F/I Manual de usuario
Vitek
Vitek VTD-M2HET2812 Manual de usuario
Vitek
Vitek Transcendent VTC-TNB8RFEA-2 Manual de usuario
Vitek
Vitek VTC-TNT4RMS Manual de usuario
Vitek
Vitek Transcendent Series Manual de usuario
Vitek
Vitek VTD-IR2811DN Manual de usuario
