Vitea Care Junior Plus Manual de usuario
Instrukcja używania
Instructions for use
Junior Plus
CHILDREN REHABILITATIVE
STROLLER
Junior Plus
WÓZEK INWALIDZKI
SPECJALNY DZIECIĘCY
232
Nr kat. / Cat. No. DRVG0J
Wydanie/Edition EJ 01.2022
Instructions for use
TABLE OF CONTENT
1. Introduction 3
2. Product description 3
3. Indications 6
4. Contradictions 6
5. Usage 6
6. Safety of use 12
7. Everyday use and maintenance 14
8. Technical parameters 28
9. Symbols 29
10. Contact details 30
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
2 VITEACARE.COM
ATTENTION
Always follow the basic precautions according to the information included
below and regarding safety measures when using the device. Read the entire
instructions carefully before use. Keep this user’s manual for future reference.
Junior Plus children’s rehabilitative stroller is available in two sizes,
further known as Junior Plus 2, Junior Plus 3. For detailed
information please refer to the Technical Parameters section.
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 3
1. INTRODUCTION
Thank you for choosing our product. We are deeply convinced that it will meet
your expectations. Please read this document before first use. This manual
was made in order to provide the necessary information on the safe use of
the device. The correct application of the recommendations will contribute
significantly to extended durability and visual design of the product. We would
like to highlight that to davte we are constantly improving the quality of our
products, which may result in minor changes that are not included in this
manual.
2. PRODUCT DESCRIPTION
Fig. 1. Construction scheme of Junior Plus children’s rehabilitative stroller.
1. Handle, 2. Lever for changing the seat angle and backrest, 3. Trunk
stabilizer, 4. Side stabilizer, 5. Side frame, 6. Rear wheel, 7. Basket for small
items, 8. Canopy, 9. Head stabilizer, 10. Safety belts, 11. Front guard, 12. Front
wheel handle, 13. Footrest, 14. Front wheel.
4 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
EQUIPMENT OF THE STROLLER’S PACKAGE
Fig 2. Stroller corpus
Fig 3. Seat
Fig 4. Wheels
Front wheel
Front wheel stem
Rear wheel
Side frame connector
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 5
Fig 5. Front guard Fig 6. Canopy
Fig 7. Basket for small items, umbrella (additional option), table and try holder, lumbar support,
attachable cup holder
Fig 8. Sleeping bag Fig 9. Raincover
6 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
3. INDICATIONS
The stroller is designed for children with disabilities and / or dysfunctions movement
activities as a result of damage of the CNS Central Nervous System. It can be used in
children with CP Cerebral Palsy, myelomeningocele, muscle disorders, dysfunctions of
the lower limbs.
The maximum weights are 40 kg (Junior Plus 2) & 75 kg (Junior Plus 3).
4. CONTRAINDICATIONS
Contradictions against sitting position.
5. USAGE
• After unpacking the package, check if it contains all parts in accordance with the list of
elements set out above.
• Ensure that all components have no visible damage. If any doubts, please contact the
manufacturer.
• Do not use the stroller until all parts are properly connected.
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 7
UNFOLDING THE STROLLER
Fig 10. Folded stroller Fig 11. Unfolded stroller
Caregiver handle Lever for changing angle of
seat and backrest
Lever for
corpus
folding
Front wheel
handle
• Unfolding the stroller should begin with the setting of the corpus on a flat surface,
preferably on the floor. Handle to drive should be facing up (Fig. 10).
WARNING: In Junior Plus 3 start first with unfolding footrests.
• Stroller corpus should be lifted up using the handle until (Fig. 11.) you will hear
a click.
• To fold a stroller corpus, at the same time pull upwards the two levers folding. At this
moment lock is released and side frame connector is separated.
• Then direct down the driving handle till the stroller corpus get figure like on Fig. 10.
• Make sure that the actuators are unlocked when folding and unfolding the stroller.
To do this, press the seat and backrest
WARNING! When folding the stroller, the rear wheels must be
unlocked!
8 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
Seat lock
Fig 12. Folded stroller Fig 13. Seat lock closeup
• Into unfolded stroller corpus, attach wheels.
• Front wheel stem slip in the wheel grip in the direction from the bottom to the top, to
the point hearable click.
• To remove the front wheels, press button located at the top of wheel handle and pull it
in from top to bottom (Fig. 12.).
• Rear wheels slide on the pin located in the back of the stroller corpus. Press in this
same time the button located in the central part of the wheel to hearable click.
• To remove the rear wheels, press the button in the middle of the wheel and then pull
the wheel out of the stroller corpus (Fig. 13.).
• Basket for small items should be mounted on the front of the stroller to a thin rod in
the lower part of the side frames using latch, while at the rear of the horizontal rod using
Velcro (Fig 13.).
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01 VITEACARE.COM 9
Rod Seat socket
• Seat is equipped with four pins, two on each side.
• While installing the seat, pins should be positioned in the seat socket (Fig. 15.).
• The seat should be held with both hands, one hand front edge of the seat and second
hand the upper edge of the backrest.
• After placing the seat in the stroller corpus, it will lock automatically.
• To remove the seat from the corpus, the safety devices must be unlocked at the same
time. The safety catch (1) needs to be moved down, and the second safety catch (2)
towards the first safety catch (Fig. 16.). There will be a characteristic click. Do this on
both sides. Carefully pull out the seat.
Fig 14. Seat with rod Fig 15. Seat sockets
Fig 16. Safety catches
12
10 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2022-01
• To install the canopy push canopy handles on the stroller support frame (Fig. 17, 18.).
• Sleeping bag mount if only the child is properly fasted with the seatbelt (Fig. 19).
• To mount the sleeping bag, start from the bottom by hooking it on the footrest.
• Front guard must be attached to the seat frame with clips, make sure that the barrier is
properly fastened (Fig. 18.).
Canopy lock
Fig 18. Canopy folded
Fig 17. Canopy attachment
Fig 19. Canopy unfolded,
sleeping bag
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Otros manuales de Paseante de Vitea Care
Vitea Care
Vitea Care UMBRELLA Manual de usuario
Vitea Care
Vitea Care PROMYK PLUS Manual de usuario
Vitea Care
Vitea Care MDH Junior Manual de usuario
Vitea Care
Vitea Care PROMYK Manual de usuario
Vitea Care
Vitea Care Premium PROMYK Manual de usuario
Vitea Care
Vitea Care Junior Plus 2 Manual de usuario
Vitea Care
Vitea Care DRVG0C Manual de usuario
Vitea Care
Vitea Care UMBRELLA Manual de usuario
Vitea Care
Vitea Care PREMIUM PROMYK SPECIAL PLUS Manual de usuario
