VISIONARY DESIGNS MOD-1377 Manual

Order #XXXXX

Locked layer contains

placeholder marks.

Completed Assembly

Post

Mount

Plate

Clamshell

Set

Screw

Base

Bolt

Cord Management for iPad

Attach iPad cord to supplied USB extension

cord. Feed USB cord through top hole of

post, then out bottom hole of post.

Connect to power.

Cord

Access

iPad

Lock Lock

Clamshell

Steps:

1) Attach base to post, using bolt.

2) Attach mount plate to post, using set screw.

NOTE: Mount plate must rotate left and right,

before installing clamshell.

3) Attach clamshell to mount plate, using acorn nuts.

4) Insert iPad into clamshell, then route cords through

holes in post. See Cord Management detail.

5) Attach Z-Plate to post, using bolts.

6) Attach Literature Pockets to back of post.

Foam Lining

Removed

Home Button Shield

Optional Cover for Home Button

1) Remove foam lining from inside bottom of

clamshell.

2) Attach Home Button Shield with double-sided

tape to inside of clamshell, keeping top of

shield flush with clamshell opening.

NOTE: This is a permanent fix and can’t be

easily removed.

Acorn

Nuts

Clamshell

Literature

Pockets

Bolt

Z-Plate

Rotate clamshell

to turn iPad from portrait

to landscape orientation.

MOD-1377 Sanitizer / iPad Stand

REV 9/2021

If you would like to tell us about your experience with your setup instructions please email us at [email protected]

SETUP INSTRUCTIONS

Order #XXXXX

DO NOT USE POWER TOOLS

ALL CONNECTIONS MUST

BE TIGHTLY SECURED

Part Identification - Numbering

Spline Connection Base Plate & Extrusion Connection

General Setup Instructions

- Read entire setup instruction manual prior to

unpacking parts and pieces.

- The setup instructions are created specifically

for this configuration.

- Setup instructions are laid out sequentially in

steps, including exploded views with detailed

explanation for assembly.

WARNING

Cleaning & Packing

- For Cleaning Metal, Plex, & Laminate Parts:

Use a MILD NON-ABRASIVE cleanser and

soft cloth/paper towel to clean all surfaces.

- Keep exhibit components away from heat

and prolonged sun exposure.

Heat and UV exposure will warp and

fade components.

- Retain all provided Packing Materials.

All provided packing materials are for

ease of repacking & component protection.

Disassembly

- For loss prevention, tighten all set screws

and locks during disassembly.

Hex Tool - Essential for Assembly

Extrusion & Lock Connection Engaged Lock

LADDERS OR LIFTS

MAY BE REQUIRED

General Information

Otros manuales de Rack y soporte de VISIONARY DESIGNS

VISIONARY DESIGNS

VISIONARY DESIGNS MOD-9001 Manual de usuario

VISIONARY DESIGNS

VISIONARY DESIGNS VK-4030 Manual de usuario

VISIONARY DESIGNS

VISIONARY DESIGNS MOD-9008 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS MOD-1245 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS Sacagawea VK-1215 Manual de usuario

VISIONARY DESIGNS

VISIONARY DESIGNS MOD-1521 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS VK-4040 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS VK-1326 Manual de usuario

VISIONARY DESIGNS

VISIONARY DESIGNS MOD-1234 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS VK-1369 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS VK-1127 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS VK-1362 Manual

VISIONARY DESIGNS

VISIONARY DESIGNS MOD-9003 Manual de usuario

VISIONARY DESIGNS

VISIONARY DESIGNS VK-2984 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario