Viper 5704V Manual de usuario

M 0 D E L

0 W N E

S G U I D E

5704V

Congratulations.

·-----------·-·-----·----·

Congratulations on

the

purchase

your state-of-the-art security and

re-

mote start

system.

Reading

this

Owner's

Guide

prior

using your

sys-

tem

will help maximize the

use

of your

system

and

its

many features.

Please

visit:

www.viper.com-

For

general and additional guide infor-

mation.

For

any additional questions please contact your authorized

Directed dealer or contact Directed at 1-800-753-0600 (U.S. only).

Additional support

also available at:

http:/

/support.directed.com.

Mdili

aIG

uide_Jnfor

ati

----

-----··----

-------·----··-·----

-----~-----·

Only

basic commands, features and essential information are covered

this

compact guide.

Your

product

has

many advanced features

which are not discussed here, please consult

the

expanded online

version for these at: www.viper.com. Most sections

this

guide also

contain additional information which can be found

the

expanded

online version.

What

you

get

Welcome

the

best generation of security with remote start.

Your

system

contains everything you need.

• Responder

remote control with

SST

technology for superior

range and reliability

(p/n

7752V)

• 1-way Companion remote control

(p/n

7654V)

•

adapter for charging your remote control

(p/

8602T)

• Documentation: Owner's guide and Warranty card

Your

Warranty

Your

Responder

system

comes with a warranty.

Make

sure

you

receive

the

warranty registration cord and proof

purchase from your

dealer indicating the product

was

installed by on authorized Directed

dealer. Please validate

online at

www.prodregister.com/

directed

complete and

return

the

warranty registration cord.

Getting

Started

Due to transit and storage time prior

your purchase,

the

battery

charge may hove depleted.

ensure proper operation, check

the

battery level and connect the battery charger if not fully charged.

The

displayed battery level icon indicates when

the

battery

fully

charged.

Contents

Responder

2-Way

...........................................................................................2

Status Screen Icons..............................................................................................4

Using your

System

...............................................................................................7

Commands and Confirmations

..............................................................

Performing Commands

.........................................................................

Responder

Command table

..............................................................

Fault Condition Alerts

...........................................................................

Basic

Commands (Direct Access) ..........................................................................9

Arm

...................................................................................................

Disarm

...............................................................................................

AUX/Trunk

........................................................................................

Remote Start

......................................................................................

Responder

Configuration...............................................................................

Navigating

menus and options

............................................................

Button operation

................................................................................

Access menu items

............................................................................

1-way Companion

Remote

Control ..................................................................... 12

Battery Information (Responder

LC)

..................................................................... 13

Battery Information (1-Way)

................................................................

Battery Disposal

................................................................................

Government Regulations ....................................................................................

Warning! Safety First.........................................................................................

Installation

........................................................................................

Remote Start

Capable

........................................................................

Manual

Transmission Vehicles

.............................................................

Interference

.......................................................................................

Upgrades and Batteries

......................................................................

Water

/Heat

Resistance

......................................................................

Limited lifetime consumer warranty.....................................................................

Responder

2-Woy

Internal

Antenna

Function

Button

Used for transmitting and receivin information

Status

screen -the upper portion

the

display contains

status

icons for

the

System,

Siren, Alarm zones,

Remote

Start and

Remote

Control.

Text

field -

the

lower portion of display -shows

the

Clock,

Runtime or Temperature during

Remote

Start,

well

Command confirmations, Page messages and programming

Used

perform arming, disarming, auxiliary channel and

remote start commands

Used to access function levels for commands, configura-

tion

menus

for programming,

Car

Selection, and

request

rt.

Directed.

All

rights

reserved.

Control

Center

N--++-

Control button

The

Control Center, typically located on

the

upper part

the

front

windshield sends and receives commands or messages to

and

from

your

system.

consists of:

•

The

In-vehicle

system

antenna, for 2

way

communication.

•

The

Status

LED,

as a visual indicator

the

system's

status.

•

The

Control button, for placing the

system

into Valet

Mode*

and

to perform

the

Emergency

Override**

operation.

See

"Remote

and

System

Operations"

online guide.

See

"Alarm

Features"

online guide.

Directed.

All

rights

reserved.

........

.......

ot'-liiiLIIus~S

..........

cr.___ee.JIILL.n.__..l

.........

co.........,ns

_________

·-----·-

Status

Screen

Icons

~$X

• • •

ALL

:((

fwl

lwlsiwl

lwl

IWI IWt

@ll!ff•IMf@)

w-+---

Text

Field

The

table

below

describes all the

status

screen icons.

{';:-~l.

' '

' I

:::)

c::

(I)

+ALL

}

•,

(~}

Armed:

The

system

Armed,

the

alarm

enabled.

Locked:

The

system

Locked

Valet,

the

alarm

disabled.

Disarmed:

The

system

Disarmed,

the

alarm

disabled.

Unlocked:

The

system

Unlocked

Valet,

the

alarm

dis-

abled.

Siren

disabled for sensor triggers; remote

paged

for all trig-

gers (Sensor Silent Arm).

Siren

disabled for all triggers; remote

paged for all triggers

(Full

Silent Arm).

Remote

start

active,

the

engine

running.

Timer Start

On;

Remote

Start

On.

Note:

When

the

icon

without an

arrow

head: Timer Start

enabled:

Remote

Start

Off

Directed.

All

rights

reserved.

{~)

((Ill

111

cl)

(/)

Iii

Smart Start

;

Remote

Start

Note:

When

the

icon

without an arrow head: Smart Start

;

Remote

Start

Off

Manual

Transmission Start mode

enabled,

the

engine can

be started

Displays

the

vehicle interior temperature

during

Remote

Start after performing

the

Defogger

command

during

Warn-away

and

Full

Trigger message output

during

Trunk

Zone

Full

Trigger output and

Trunk

channel activation

during Fault Report

indicate

the

Trunk

open and

bypassed when arming

during a Sensor Zone

Full

Trigger output

during

Fault

Report to indicate a Sensor

active and

bypassed when arming

during

the

Door Zone

Full

Trigger output

during Fault Report

indicate a Door

open and

bypassed when arming

during a

Hood

Zone

Full

Trigger output

during Fault Report

indicate

the

Hood

open and

bypassed when arming

when remote

set

command

the

system

programmed

Car

when remote

set

to command

the

system

programmed

asCar2*

2012

Directed.

All

rights

reserved.

•

((

Text

field

Bars

indicate battery level

Full,

/4,

or Empty

while

the

remote control

transmitting a command

while

the

remote control

receiving a message

with

Out

of Range fault tone

indicate

the

remote failed

receive a command confirmation

Pager

The

remote will

wake

listen

for messages

Pager off:

The

remote will not

wake

listen

for messages

The

remote will Vibrate when messages are received

The

remote will emit Beeps and

Tones

when messages are

received

Displays the Clock,

Runtime,

Temperature, message text and

feature

menus

after the

Garage

Open**

message

has

been received.

after the

Garage

Closed**

message

has

been received.

This

icon not present until the

Car

turned on

the Setup

Re-

mote configuration menu.

* *

This

icon not present until the remote

paired with an optional

rage

door

opener.

Directed.

All

rights

reserved.

Commands

and

Confirmations

Commands, Basic or Advanced, are used to activate

system

features

and are performed

pressing one of the Command buttons. Basic

commands control the most often used security

and

remote start fea-

tures

while Advanced commands control more specialized features

and request reports.

Confirmations for Basic or Advanced commands are indicated

first

siren chirps and parking light flashes, and

then

Text,

Icons

and

beeps or tones on the remote control. A description

each fea-

ture confirmation

found

the Basic Commands section. See online

guide for Advanced Commands section.

Performing

Commands

Perform Basic commands

pressing one

the command buttons

while

the Direct Access level. Direct access

available while the

text field displays the Clock, Temperature or Runtime. Perform Ad-

vanced commands

first accessing one of the Function

Levels

and

then

pressing one

the command buttons while within a level.

Func-

tion

Levels

are

available

when the text field displays

LEVEL

1,2,3

Advanced

command

example:

Silent

Arm

l .

Press

the f button once to access Function

Level

the text

field will

display

'i;

lltllg

JH.

Press

the

button

while

'18111

text

still

on to perform the

Silent Arm command.

The

Responder

remote will display

'ff~Y

itflll

}

im?

the

text field and update the

status

screen icons.

2012

Directed.

All

rights

reserved. 7

Tabla de contenidos

Otros manuales de Alarma de coche de Viper

Viper

Viper Directed 4706V Manual de usuario

Viper

Viper 460XV Manual de usuario

Viper

Viper 4806V Manual de usuario

Viper

Viper SmartKey VSK100 Manual de usuario

Viper

Viper 5706V Manual de usuario

Viper

Viper Responder 350 Manual de usuario

Viper

Viper SmartStart VSM200 Series Manual de usuario

Viper

Viper 280HF Manual de usuario

Viper

Viper Responder 350 Manual de usuario

Viper

Viper 591XV Manual de usuario

Viper

Viper 7900 Manual de usuario

Viper

Viper 4806V Manual de usuario

Viper

Viper 500HF Manual de usuario

Viper

Viper 310V Manual de usuario

Viper

Viper 1000 Manual de usuario

Viper

Viper 771XV Manual de usuario

Viper

Viper 5104 1-Way Manual de usuario

Viper

Viper 160XV Manual de usuario

Viper

Viper 420ESP Manual de usuario

Viper

Viper 480XV Manual de usuario

Viper

Viper SmartStart VSM50BTP1 Manual de usuario

Viper

Viper 4806V Manual de usuario

Viper

Viper 560XV Manual de usuario

Viper

Viper 200 MAX Manual de usuario

Manuales populares de Alarma de coche de otras marcas

Clifford

Clifford 3606X Manual de usuario

Ultra Start

Ultra Start 2500M SERIES Manual de usuario

Ultra Start

Ultra Start 650 Series Manual de usuario

Audiovox

Audiovox Prestige Platinum+ APS-511C Manual de usuario

Sparkrite

Sparkrite SRA8 Manual de usuario

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manual

Falcon

Falcon Predator XL3 Guía del usuario

Audiovox

Audiovox Auto Security XR91 Instrucciones de funcionamiento

Clifford

Clifford Sabre II Manual de usuario

CrimeStopper

CrimeStopper CS-8717 Guía de inicio rápido

Ultra Start

Ultra Start 450 SERIES Manual de usuario

Scytek electronic

Scytek electronic Vectra X3 Manual de usuario

Excalibur

Excalibur AL-1860-EDPB Manual de usuario

Clifford

Clifford CYBER 2 Manual de usuario

Gemini

Gemini 7057 Manual de usuario

FlashLogic

FlashLogic FLRSBA PRESTIGE Manual de usuario

Magicar

Magicar FAI-440 Manual de usuario

Clifford

Clifford Nova 3 Manual de usuario