Viessmann Vitotronic 300 GW6B Manual de usuario

Read and save these instructions

for future reference.

Please file in Service Binder

Product may not be exactly as shown

5513 463 - 06 03/2015

for use by heating contractor

VITOTRONIC 300, GW6B

Installation and Service

Instructions

Vitotronic 300, Type GW6B

Weather-compensated boiler and heating circuit control unit

in single boiler or multi boiler systems

IMPORTANT

Certified as a component

part for Viessmann boilers

5513 463 - 06

Vitotronic 300, GW6B Installation and Service

General

Safety, Installation and Warranty Requirements

Please ensure that these instructions are read and understood before commencing installation. Failure to comply with

the instructions listed below and details printed in this manual can cause product/property damage, severe personal

injury, and/or loss of life. Ensure all requirements below are understood and fulfilled (including detailed information

found in manual subsections).

WARNING

Installers must follow local regulations with respect to

installation of carbon monoxide detectors. Follow the

Viessmann maintenance schedule of the boiler contained

in this manual.

Product documentation

Read all applicable documentation before commencing

installation. Store documentation near boiler in a

readily accessible location for reference in the future

by service personnel.

For a listing of applicable literature,

please see section entitled “Important

Regulatory and Safety Requirements”.

Licensed professional heating contractor

The installation, adjustment, service and maintenance

of this equipment must be performed by a licensed

professional heating contractor.

Please see section entitled

“Important Regulatory and Installation

Requirements”.

Advice to owner

Once the installation work is complete, the heating

contractor must familiarize the system operator/

ultimate owner with all equipment, as well as safety

precautions/requirements, shutdown procedure, and

the need for professional service annually before the

heating season begin.

Warranty

Information contained in this and

related product documentation must

be read and followed. Failure to do

so renders the warranty null and void.

Operating and Service Documentation

It is recommended that all product documentation such

as parts lists, operating and service instructions be

handed over to the system user for storage.

Documentation is to be stored near boiler in a readily

accessible location for reference by service personnel.

Product Information

Vitotronic 300, Type GW6B

For installation in or mounting on Viessmann boilers only.

Applicable to the following control units

Order No. Z013557

Serial No. 7542124

Page

5513 463 - 06

Table of Contents

Vitotronic 300, GW6B Installation and Service

General

Safety

Preparing for Installation

Electrical Connections

Commissioning

Service Scans

Safety, Installation and Warranty Requirements..............2

Product Information....................................................2

About these Instructions.............................................5

For your Safety..........................................................6

Overview of System Example.......................................7

Designations in the Example.........................................7

SystemExamples........................................................8

Single boiler system...........................................8

Multi boiler system..........................................12

Overview of Electrical Connections.............................21

Boiler Control and Junction Box.................................26

Mounting the Control Unit.........................................26

Opening the Control Unit..........................................27

Plugging in the Boiler Coding Card..............................27

Inserting Cables and Applying Strain Relief.................28

Connecting Sensors……………................................…28

Control Power Supply……………..............................…29

Connecting the Burner..............................................30

Connecting Pumps....................................................31

Connecting a Central Fault Massage Facility................34

Connecting Actuators...............................................34

Connection of Low Water Cut-off Device.....................36

Connecting External Safety Equipment……………......…37

Connections to Terminal 151………………………….……38

Provisional Burner Operation.......................................39

Blocking the Boiler Externally/Adding to the Boiler

Sequence................................................................40

External Blocking via Switching Contact......................41

External Demand via Switching Contact......................42

External Demand via 0 – 10V Input……..……...........…43

External “Mixing Valve Closed”/”Mixing Valve Open”....43

External Operating Program Changeover......................44

Power Supply……………….....................................…45

Making the LON Connection………………………….…..…46

Commissioning the System........................................48

Adjusting Coding......................................................49

Connecting the Control Unit to the LON......................50

Setting the Boiler Sequence at the Cascade Control Unit...52

Carrying Out an Actuator Test...................................53

Checking Sensors.....................................................54

Adjusting the Heating Curve……..............................…54

Calling up the Service Menu......................................57

Leaving the Service Menu..........................................58

Change Passwords……………………………..……...........58

Resetting all Passwords to Factory Settings.................58

Scanning Operating Data...........................................59

Resetting Operating Data...........................................59

Brief Scan...............................................................60

Maintenance Display.................................................61

Table of Contents

Page

5513 463 - 06

Vitotronic 300, GW6B Installation and Service

Troubleshooting

Function Description

Coding Levels

Coding Level 1

Coding Level 2

Diagrams

Components

Parts

Specification

Fault Display............................................................62

Boiler System Fault Codes.........................................63

Burner Fault Codes....................................................69

Boiler Water Temperature Control...............................72

Cascade Control Unit................................................72

Heating Circuit Control Unit.......................................77

DHW Tank Temperature Control.................................81

Calling up Coding Levels............................................85

Resetting Coding to their Factory Set Condition............85

“General” Group.......................................................86

“Combustion Controller” Group..................................88

“Boiler” Group..........................................................88

“Cascade” Group......................................................89

“DHW” Group..........................................................91

“Solar” Group...........................................................91

“Heating Circuit...” Group..........................................92

“General” Group.......................................................95

“Combustion Controller” Group................................102

“Boiler” Group........................................................103

“Cascade” Group....................................................103

“DHW” Group.........................................................106

“Solar” Group.........................................................108

“Heating Circuit...” Group........................................111

Connection and Wiring Diagram................................117

EA1 Extension........................................................120

Sensors.................................................................121

Extension EA1 Accessory (optional)..........................122

Parts List – Programming Module..............................123

Parts List – Connection Module................................124

Specification Vitotronic 300, GW6B.........................125

5513 463 - 06

Vitotronic 300, GW6B Installation and Service Safety

About these Instructions

Take note of all symbols and notations intended to draw attention to potential hazards or important product

information. These include “WARNING”, “CAUTION”, and “IMPORTANT”. See below.



IMPORTANT

Warnings draw your attention to the presence of

potential hazards or important product information.

Cautions draw your attention to the presence of

potential hazards or important product information.

Helpful hints for installation, operation or maintenance

which pertain to the product.

This symbol indicates that additional, pertinent

information is to be found.

This symbol indicates that other instructions must

be referenced.

WARNING

Indicates an imminently hazardous situation which,

if not avoided, could result in loss of life, serious injury

or substantial product/property damage.

CAUTION

Indicates an imminently hazardous situation which,

if not avoided, may result in minor injury or product/

property damage.

Vitotronic 300, GW6B Installation and Service

5513 463 - 06

If you smell gas

HDon’t smoke! Don’t use naked flames or cause sparks

(e.g. by switching lights or electrical appliances on

and off)

HOpen windows and doors

HClose the gas shut-off valve

HInform your heating engineers/service contractors from

outside the building

HObserve the safety regulations of your gas supply

company (see gas meter) and those of your heating

engineers (see start-up or instruction report).

In emergencies

HImmediately switch off the power supply, e.g. at the

separate fuse or power supply disconnect switch

(unless there is a smell of gas).

HClose the shut-off valves in the oil pipes or close the

gas shut-off valve, whichever applicable.

HUse suitable extinguishers in the event of fire.

Installation of additional components

The installation of additional components which have not

been tested together with the boiler can adversely affect

the function and performance of the boiler.

Our warranty does not cover and we accept no liability

for damage attributable to the installation of such

components.

Boiler room conditions

HDo not use a room in which the air is polluted by

halogenated hydro-carbons (e.g. as contained in

aerosols, paints, solvents and cleaning agents)

HDo not use a room subject to high levels of dust

HDo not use a room subject to permanently high humidity

HThe room should be frost-protected

HMax. ambient temperature 95°F (35°C).

HProvide good ventilation and do not close or obstruct

vents (if installed).

This symbol indicates a reference to other instructions

which must be observed.

Safety

CAUTION

Follow these safety instructions closely to avoid the risk

of injury and damage to property.

For your Safety

HOperation

Before operating the boiler, make sure you fully

understand its method of operation. Your heating

contractor should always perform the initial start-up

and explain the system. Any warranty is null and void

if these instructions are not followed.

HFlue gas smell

- Deactivate heating equipment.

- Open windows and doors.

- Inform your heating contractor.

HWorking on the equipment

All personnel working on the equipment or the heating

system must have the proper qualifications and hold

all necessary licenses. Ensure main power to

equipment, heating system, and all external controls

has been deactivated. Close main gas supply valve.

Take precautions in all instances to avoid accidental

activation of power during service work.

HDangerous conditions

- Deactivate main power immediately.

- Close gas supply valve.

HMaintenance and cleaning

Regular inspection and service by a qualified heating

contractor is important to the performance of the boiler.

Neglected maintenance impacts on warranty; regular

inspection ensures clean, environmentally friendly and

efficient operation. We recommend a maintenance

contract with a qualified heating contractor.

HTechnical documentation

- Installation Instruction and Service Instructions

- Operating Instructions and User’s Information Manual

Additional applicable literature:

- Accessory manuals

5513 463 - 06

Vitotronic 300, GW6B Installation and Service Preparing for Installation

Overview of System Example

This system example is merely a GENERIC LAYOUT

and must therefore be checked on site for completeness

and function.

The heating circuits must be regulated by an external

control unit.

Connect three-phase consumers via additional

contactors.

Designations in the System Example

Vitotronic 300, GW6B Installation and Service

5513 463 - 06

System Examples

Preparing for Installation

ID: 4800078_1407_01

Single boiler system

Note: This schematic is a general example without shutoff

valves or safety equipment. This does not replace

the need for local engineering.

5513 463 - 06

Vitotronic 300, GW6B Installation and Service

Required Devices

ID: 4800078_1407_01

Position Equipment

1Boiler

2Vitotronic 300 GW6B

3Outdoor temperature sensor ATS

4Boiler temperature sensor KTS (connection to burner control)

5Neutralization system

wT Junction box

wZ Burner base

rR Power switch

6DHW

7DHW tank temperature sensor STS delivered with Vitotronic 300

8DHW pump UPSB

9DHW re-circulation pump ZP

qP Heating circuit I

qW Heating circuit M2 (heating circuit I)

qE Mixing valve M2 (heating circuit I)

qQ Strap-on temperature sensor

and

qE Mixing Valve Actuator M2 (heating circuit I)

qZ Mixing valve adapter 24V

qR Heating circuit II

qZ Heating circuit M3 (heating circuit II)

qU Mixing valve M3 (heating circuit II)

qT Strap-on temperature sensor

and

qU Mixing valve actuator M3 (heating circuit II)

uU Mixing valve adapter 24V

Accessories

wW Compiled fault output

wR Vitotrol 200A or Vitotrol 300A

eP Extension EA1:

eQ 1 analog input (0 to 10 V) - Specification of the boiler water temperature setpoint

eW 3 digital inputs - Separated External switch the operating status for heating circuits 1 to 3 switchable

(with control for weather-compensated operation)

- External blocking with collective fault

- Error messages

- Brief operation DHW re-circulation pump (for weather-compensated control units)

eE 1 switching output (floating changeover contact)- Control system pump to a substation

- Signal reduced mode for one heating circuit external hook

eR - External demand

eZ - External blocking / mixer to close

eU - External heating program changeover / mixer on site

4KM BUS distributor, with several KM BUS participants

KM BUS subscriber: - Extension EA1

- Vitotrol 200A, 300A

rQ LON communication module to communicate with the following components:

rW Vitotronic 200-H (for controlling additional heating circuits)

rE Vitocom 100, type LAN1 with communication module

rR Power switch on site / main disconnect

System Examples (continued)

Preparing for Installation

Vitotronic 300, GW6B Installation and Service

5513 463 - 06

System Examples (continued)

Preparing for Installation

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Viessmann

Viessmann

Viessmann 5066 Manual de usuario

Viessmann

Viessmann ViCare Manual de usuario

Viessmann

Viessmann VITOSOLIC 100 Instrucciones de funcionamiento

Viessmann

Viessmann Vivotronic 050 HK1S Guía rápida

Viessmann

Viessmann VITOTRONIC 100 Instrucciones de funcionamiento

Viessmann

Viessmann VITOSOLIC 100 Instrucciones de funcionamiento

Viessmann

Viessmann 5214 Manual de usuario

Viessmann

Viessmann VITOTRONIC 300 Manual de instrucciones

Viessmann

Viessmann 5222 Manual de usuario

Viessmann

Viessmann VITOTRONIC 300-K Guía rápida

Viessmann

Viessmann 5205 Manual de usuario

Viessmann

Viessmann VITOTRONIC 300 Guía rápida

Viessmann

Viessmann 5559 Instrucciones y recetas

Viessmann

Viessmann VITOTRONIC 100 Manual de usuario

Viessmann

Viessmann VITOSOLIC 100 Guía rápida

Viessmann

Viessmann PLC VITOCAL 350-HT PRO Instrucciones de funcionamiento

Viessmann

Viessmann EA1 Manual de operación y mantenimiento

Viessmann

Viessmann EM-EA1 extension Guía rápida

Viessmann

Viessmann SCU 123 Manual de usuario

Viessmann

Viessmann 5204 Manual de usuario

Viessmann

Viessmann Vitovolt 300 Guía rápida

Viessmann

Viessmann vitotronic 200-h Manual de usuario

Viessmann

Viessmann VITOTRONIC 200 Manual de usuario

Viessmann

Viessmann 5221 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario