Viessmann VITOSOLIC 200 Instrucciones de funcionamiento
Operating instructions
for the system user
VIESMANN
Control unit for solar thermal systems
VITOSOLIC 200
5608 437 GB 4/2014 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These operating instructions are inten-
ded for system users.
This appliance can also be operated by
children of 8 years and older, as well as
by individuals with reduced physical,
sensory or mental faculties or those lack-
ing in experience and knowledge, provi-
ded such individuals are being super-
vised or have been instructed in the safe
use of this appliance as well as in any
risks arising from it.
!Please note
Supervise children in the proxim-
ity of the appliance.
■ Never permit children to play
with the appliance.
■ Cleaning and maintenance
must not be carried out by
unsupervised children.
Appliance connection
■ The appliance may only be connected
and commissioned by authorised con-
tractors.
■ Observe the specified electrical con-
nection requirements.
■ Modifications to the existing installa-
tion may only be carried out by author-
ised contractors.
Danger
Incorrectly executed work on the
system can lead to life-threaten-
ing accidents.
Work on electrical equipment
must only be carried out by a
qualified electrician.
Work on the appliance
■ All settings and work on the appliance
must be carried out as specified in
these operating instructions.
Further work on the appliance may
only be carried out by authorised con-
tractors.
■ Never open the appliance.
■ Never change or remove fitted acces-
sories.
In case of fire
Danger
Fire presents a risk of burns and
explosion.
■ Switch the system OFF.
■ Use a tested fire extinguisher,
class ABC.
Safety instructions
For your safety
5608 437 GB
3
Auxiliary components, spare and
wearing parts
!Please note
Components that were not tested
with the system may cause sys-
tem damage, or may affect its
functions.
Have all installation or replace-
ment work carried out by qualified
contractors.
Safety instructions
For your safety (cont.)
5608 437 GB
4
Introductory information
Commissioning..................................................................................................... 5
Operation............................................................................................................ 6
Scanning options
Calling up actual values....................................................................................... 7
Calling up messages............................................................................................ 8
Scanning statement values.................................................................................. 9
Calling up the heat amount.................................................................................. 9
What to do if...
The solar thermal system does not start.............................................................. 11
There is no DHW available................................................................................... 11
The display is dark............................................................................................... 12
The display illumination flashes............................................................................ 12
Calling up faults.................................................................................................... 12
Upkeep
Inspection and maintenance................................................................................ 13
■ DHW cylinder (if installed)................................................................................. 13
■ Safety valve (DHW cylinder)............................................................................. 13
■ Potable water filter (if installed)......................................................................... 13
Damaged cables / lines........................................................................................ 14
Menu overview.................................................................................................... 15
Index
Index
5608 437 GB
5
The commissioning and adjusting of the
control unit to local conditions and to
building characteristics, plus the instruc-
tion of the user in operating the system,
must be carried out by your heating con-
tractor.
Introductory information
Commissioning
5608 437 GB
6
Controls
B
30.04.2009
Tcol
Tcylb
10:59
47.7 °C
35.4 °C
A
AStandard display
The standard display is shown
automatically after approx. 4 min.
BOK key; to confirm your selection
or save the setting.
Takes you to the previous step in
the menu or cancels a setting that
has been started.
/ Cursor keys
To scroll through the menu.
/ Cursor keys
To adjust values.
To change between standard dis-
play and main menu.
The display only shows 4 lines of text.
The arrow on the left of the display high-
lights the available menu item.
Use / to scroll through the menu.
Operation
Operation
5608 437 GB
7
Press the following keys:
1. for the "Main menu".
2. OK the first 3 actual values will be
displayed.
3. / for the following actual values,
subject to system equipment
level.
4. until the "Main menu"
appears.
"Actual values:" Explanation
"Tcol" Collector temperature in °C
"Tcol2" Collector temperature in an additional collector array in °C
"Tcylb" Actual cylinder temperature in °C
"Tcyl2b" to
"Tcyl4b"
Actual cylinder temperature for additional consumers (e.g.
2nd DHW cylinder) in °C
"Tby" Bypass temperature in °C
"T-HE" Temperature in an external heat exchanger in °C
"Cyl. add." Additional function for DHW heating
"Time"
"Date"
"Relay" Condition of relays
"Sensors" Temperature at the respective sensor in °C
Note
If the sensor inputs are not connected, the breaking value (in-
dicating a lead break) is displayed.
"Intens." Radiation intensity in conjunction with a solar cell
Note
If the input is not connected, the breaking value (indicating a
lead break) is displayed.
A diagram in the standard display ena-
bles you to check the collector and actual
cylinder temperatures over the course of
the day. If your heating contractor has
enabled the heat meter, a diagram is
also displayed showing the heat amount
for the past 7 days.
Repeatedly press , this brings up the
following diagrams:
Scanning options
Calling up actual values
5608 437 GB
8
Actual cylinder temperature curve
Tcylb today
12
Collector temperature curve
Tcol today
12
Heat amount in kWh
HM 1
7
5 5
33
6
1
Note
The bar on the very right indicates the
value in kWh for the current day.
Calling up messages
Press the following keys:
1. for the "Main menu".
2. for "Messages".
3. OK to confirm.
4. to display further messages
(see table below).
"Messages:" Explanation
No fault There is no fault at the solar control unit.
"Loading cyl"
(only with several consum-
ers)
The display shows which consumer is being heated.
"Pause cyl"
(only with several consum-
ers)
Only if the "Cyclical heating" function has been ena-
bled by your heating contractor:
Pause in the heating of the displayed consumer.
"Cyl. set" The consumer displayed has reached its set value.
"Fault" A fault has occurred at the solar control unit (to check
the cause, see page 12).
"SW version" Software version (only for service engineers)
"HW version" Hardware version (only for service engineers)
Scanning options
Calling up actual values (cont.)
5608 437 GB
9
Press the following keys:
1. for the "Main menu".
2. for "Solar".
3. OK to confirm.
4. for "Statement".
5. OK to confirm.
6. / for the following statement val-
ues, subject to system equip-
ment level.
7. until the "Main menu"
appears.
"Statement" Explanation
"Colmax" Maximum collector temperature in °C
"Col2max" Maximum collector temperature in an additional collector ar-
ray in °C
"Cylmax" Maximum cylinder temperature in °C
"Cyl2max" to
"Cyl4max"
Maximum cylinder temperature for additional consumers
(e.g. 2nd DHW cylinder) in °C
"Relay 1" to "Relay
7"
Hours run of the actuators connected at the relay (e.g. solar
circuit pump at R1)
"Days" Days in operation, solar control unit
To reset the values, except value for
days in operation:
Whilst the value is displayed, press the
following keys:
1. OK "Delete?""Yes" is displayed.
2. OK to confirm
Calling up the heat amount
Press the following keys:
1. for the "Main menu".
2. for "HM".
3. OK to confirm.
4. for "HM 1" or "HM 2".
5. OK to confirm.
6. / for the following values, subject
to system equipment level.
Scanning options
Scanning statement values
5608 437 GB
10
7. until the "Main menu"
appears.
"HM ..." Explanation
"Tflow" Flow temperature in °C
"Tretn" Return temperature in °C
"Heat" Heat amount in Wh
"Heat" Heat amount in kWh
"Heat" Heat amount in MWh
Note
Add the heat values together.
The values are not calibrated.
If there is a power failure, the displayed
value showing the heat amount may be
up to 6 hours old.
To reset the heat amount values:
Whilst the value is displayed, press the
following keys:
1. OK "Delete?""Yes" is displayed.
2. OK to confirm
Scanning options
Calling up the heat amount (cont.)
5608 437 GB
Otros manuales para VITOSOLIC 200
6
Tabla de contenidos
Otros manuales de Unidad de control de Viessmann
Viessmann
Viessmann EM-P1 Guía rápida
Viessmann
Viessmann VITOTRONIC 300-K Guía rápida
Viessmann
Viessmann VITOSOLIC 100 Manual de usuario
Viessmann
Viessmann 5574 Manual de usuario
Viessmann
Viessmann SDIO/SM1A Guía rápida
Viessmann
Viessmann SM1 Guía rápida
Viessmann
Viessmann VITOTRONIC SPS Manual de usuario
Viessmann
Viessmann VITOCONNECT OPTO2 Manual de usuario
Viessmann
Viessmann AM1 Manual de usuario
Viessmann
Viessmann EM-S1 Guía rápida
Viessmann
Viessmann Vitovolt 200 Guía rápida
Viessmann
Viessmann VITOSOLIC 200 Guía rápida
Viessmann
Viessmann 5561 Manual de usuario
Viessmann
Viessmann 5096 Manual de usuario
Viessmann
Viessmann 5224 Manual de usuario
Viessmann
Viessmann VITOTRONIC 100 Manual de usuario
Viessmann
Viessmann VITOTRONIC 200 Instrucciones de funcionamiento
Viessmann
Viessmann VITOTRONIC SPS Instrucciones de funcionamiento
Viessmann
Viessmann SDIO Instrucciones de funcionamiento
Viessmann
Viessmann Vitotronic 100 HC1 Manual
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
