Viessmann Vitodens 100-W Guía rápida
Installation and service
instructions
for contractors
VIESMANN
Vitodens 100-W
Type WB1B, 9.0 to 35.0 kW
Wall mounted gas fired condensing boiler
Natural gas and LPG version
Gas Council no.
41-819-12; 41-819-13; 41-819-14 (gas fired condensing boilers)
47-819-18; 47-819-19; 47-819-20 (gas fired condensing combi boil-
ers)
VITODENS 100-W
5366 836 GB 9/2008 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These instructions are exclusively
designed for qualified personnel.
■ Work on gas equipment must only be
carried out by a qualified gas fitter.
■ Work on electrical equipment must
only be carried out by a qualified elec-
trician.
■ The system must be commissioned by
the system installer or a qualified per-
son authorised by the installer.
Regulations
Observe the following when working on
this system
■ all legal instructions regarding the pre-
vention of accidents,
■ all legal instructions regarding envi-
ronmental protection,
■ the Code of Practice of relevant trade
associations,
■ all current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards,
■ Gas Safety (Installation & Use) Regu-
lations
– the appropriate Building Regulation
either the Building regulations, the
Building Regulation (Scotland),
Building Regulations (Northern Ire-
land),
– the Water Fittings Regulation or
Water Bylaws in Scotland,
– the current I.E.E. Wiring Regula-
tions.
If you smell gas
Danger
Escaping gas can lead to explo-
sions which may result in serious
injury.
■ Never smoke. Prevent naked
flames and sparks. Never
switch lights or electrical appli-
ances ON or OFF.
■ Close the gas shut-off valve.
■ Open windows and doors.
■ Remove all people from the
danger zone.
■ Notify your gas or electricity
supplier from outside the build-
ing.
■ Shut off the electricity supply to
the building from a safe place
(outside the building).
Safety instructions
Safety instructions
5366 836 GB
3
If you smell flue gas
Danger
Flue gas can lead to life-threat-
ening poisoning.
■ Shut down the heating system.
■ Ventilate the boiler room.
■ Close all doors leading to the
living space.
Working on the system
■ When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.
■ Isolate the system from the power sup-
ply and check that it is no longer 'live',
e.g. by removing a separate fuse or by
means of a main isolator.
■ Safeguard the system against unau-
thorised reconnection.
!Please note
Electronic modules can be dam-
aged by electro-static dis-
charges.
Touch earthed objects, such as
heating or water pipes, to dis-
charge static loads.
Repair work
!Please note
Repairing components which ful-
fil a safety function can compro-
mise the safe operation of your
heating system.
Replace faulty components only
with original Viessmann spare
parts.
Ancillary components, spare and
wearing parts
!Please note
Spare and wearing parts which
have not been tested together
with the heating system can com-
promise its function. Installing
non-authorised components and
non-approved modifications/con-
version can compromise safety
and may invalidate our warranty.
For replacements, use only orig-
inal spare parts from Viessmann
or those which are approved by
Viessmann.
Safety instructions
Safety instructions (cont.)
5366 836 GB
4
Installation instructions
Preparing for installation
Product information.............................................................................................. 5
Preparing for installation....................................................................................... 5
Installation sequence
Installing the boiler and making all connections................................................... 9
Opening the control unit....................................................................................... 13
Electrical connections........................................................................................... 14
Service instructions
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance.......................................... 17
Further details regarding the individual steps....................................................... 18
Troubleshooting
Function sequence and possible faults................................................................ 32
Fault messages on the display............................................................................. 33
Repairs................................................................................................................. 37
Gas type conversion
Converting from LPG to natural gas .................................................................... 49
Control unit
Functions and operating conditions in weather-compensated mode .................. 52
Designs
Connection and wiring diagram............................................................................ 53
Parts lists............................................................................................................ 55
Specification....................................................................................................... 61
Certificates
Declaration of conformity...................................................................................... 63
Keyword index.................................................................................................... 64
Index
Index
5366 836 GB
5
Vitodens 100-W, WB1B
Set up for operation with natural gas.
Preparing for installation
Preparing the boiler installation
Dimensions and connections
≥ 5
≥ 250
68
400
725
58 58
123123
B
A
C E FD
G
156
a
125
31
ACondensate drain: Plastic pipe 7
22 mm
BHeating flow
CGas fired condensing boiler:
Cylinder flow
Gas fired condensing combi boiler:
DHW
DGas connection
Preparing for installation
Product information
5366 836 GB
Installation
6
EGas fired condensing boiler:
Cylinder return
Gas fired condensing combi boiler:
Cold water
FHeating return
GDrain safety valve
Rated output range kW 9 - 26 11 - 30 11 - 35
a mm 340 360 360
Preparing for installation
Preparing for installation (cont.)
5366 836 GB
7
Fitting the wall retainer
250
A
Ø10
B
155
115
AInstallation template Vitodens BOpening for the balanced flue
1. Position the supplied installation tem-
plate on the wall.
2. Mark out the rawl plug holes.
Preparing for installation
Preparing for installation (cont.)
5366 836 GB
Installation
8
3. Drill 710 mm holes and insert the
supplied rawl plugs.
4. Fit wall retainer with screws sup-
plied.
Preparing the connections
1. Prepare the water connections. Flush
the heating system.
2. Prepare gas connection.
3. Prepare the electrical connections.
Observe valid IEEE standards.
■ A 1.5 m long power cable is fitted
as standard.
■ Accessory cables:
NYM-O 2-core min. 0.5 mm2.
Preparing for installation
Preparing for installation (cont.)
5366 836 GB
9
Removing the front panel and mounting the boiler
2.
3.
1.
2x
1. Release screws at the bottom of the
boiler; do not remove completely.
2. Remove front panel.
3. Hook the boiler into the wall
retainer.
Installing connections on the water side
For fittings on the heating water side and DHW side, see separate installation
instructions.
Installation sequence
Installing the boiler and making all connections
5366 836 GB
Installation
10
BA DC E
¨
zz
AHeating flow
BGas fired condensing boiler:
Cylinder flow
Gas fired condensing combi boiler:
DHW
CGas connection
DGas fired condensing boiler:
Cylinder return
Gas fired condensing combi boiler:
Cold water
EHeating return
Safety valve connection
A
B
Connect safety valve drain A
(7 15 mm) with visible outlet B to the
dewatering system or route with visible
outlet through the external wall.
Installation sequence
Installing the boiler and making all connections (cont.)
5366 836 GB
Otros manuales para Vitodens 100-W
41
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Caldera de Viessmann
Viessmann
Viessmann VITROND 200 Manual de usuario
Viessmann
Viessmann Vitocrossal 200 CM2 Series Instrucciones de funcionamiento
Viessmann
Viessmann VITOPEND 200 Guía rápida
Viessmann
Viessmann VITOPLEX 300 Instrucciones de funcionamiento
Viessmann
Viessmann VITODENS 200 Guía
Viessmann
Viessmann Vitorond 100 Manual de usuario
Viessmann
Viessmann VITOROND 200 Manual de usuario
Viessmann
Viessmann Vitoflex 300-RF Series Manual de usuario
Viessmann
Viessmann EVO-COOL Series Manual de usuario
Viessmann
Viessmann Vitodens 100 Manual de usuario
Viessmann
Viessmann Vitodens 100-W Manual de usuario
Viessmann
Viessmann VITOMAX 200-HW Manual de capacitación
Viessmann
Viessmann Vitodens 222-F Manual de instrucciones
Viessmann
Viessmann Vitocrossal 300 CU3A Guía del usuario
Viessmann
Viessmann Vitorond 200 Type VR2 Instrucciones de funcionamiento
Viessmann
Viessmann VITODENS 050-W Manual de usuario
Viessmann
Viessmann VITOCROSSAL 200 Instrucciones de funcionamiento
Viessmann
Viessmann VITOCROSSAL 200 Instrucciones de funcionamiento
Viessmann
Viessmann Vitoladens 300-C Manual de usuario
Viessmann
Viessmann Vitocrossal 200 CM2 400 Instrucciones de funcionamiento
