Viega 4948.21 Manual de usuario

Model

4948.21

en_INT

Advantix clamping ring

Instructions for Use

Advantix clamping ring 2 from 9

Table of contents

1About these instructions for use 4

1.1 Target groups 4

1.2 Labelling of notes 4

1.3 About this translated version 5

2Product information 6

2.1 Intended use 6

2.1.1 Areas of use 6

2.2 Product description 6

2.2.1 Overview 6

3Handling 7

3.1 Assembly information 7

3.1.1 Installation dimensions 7

3.1.2 Tools and materials 7

3.2 Assembly 8

3.3 Disposal 9

Table of contents

Advantix clamping ring 3 from 9

1 About these instructions for use

Trade mark rights exist for this document; for further information, go to

viega.com/legal

1.1 Target groups

The information in this instruction manual is directed at the following

groups of people:

nHeating and sanitary professionals and trained personnel

nTilers

It is not permitted for individuals without the abovementioned training or

qualification to mount, install and, if required, maintain this product. This

restriction does not extend to possible operating instructions.

The installation of Viega products must take place in accordance with

the general rules of engineering and the Viega instructions for use.

1.2 Labelling of notes

Warning and advisory texts are set aside from the remainder of the text

and are labelled with the relevant pictographs.

DANGER!

This symbol warns against possible life-threatening injury.

WARNING!

This symbol warns against possible serious injury.

CAUTION!

This symbol warns against possible injury.

NOTICE!

This symbol warns against possible damage to property.

Notes give you additional helpful tips.

About these instructions for use

Advantix clamping ring 4 from 9

1.3 About this translated version

This instruction for use contains important information about the choice

of product or system, assembly and commissioning as well as intended

use and, if required, maintenance measures. The information about the

products, their properties and application technology are based on the

current standards in Europe (e. g. EN) and/or in Germany

(e. g. DIN/DVGW).

Some passages in the text may refer to technical codes in Europe/

Germany. These should serve as recommendations in the absence of

corresponding national regulations. The relevant national laws, stand-

ards, regulations, directives and other technical provisions take priority

over the German/European directives specified in this manual: The

information herein is not binding for other countries and regions; as said

above, they should be understood as a recommendation.

About these instructions for use

Advantix clamping ring 5 from 9

2 Product information

2.1 Intended use

2.1.1 Areas of use

The Advantix clamping ring is intended for fastening a sealing collar on

an Advantix drain.

2.2 Product description

2.2.1 Overview

Fig. 1: Scope of delivery

1 fixing screws

2 clamping ring, stainless steel

3 sealing element

Product information

Advantix clamping ring 6 from 9

3 Handling

3.1 Assembly information

3.1.1 Installation dimensions

Fig. 2: Dimensional drawing

3.1.2 Tools and materials

nscrewdriver

nsealing collar

Required tools

Required material

Handling

Advantix clamping ring 7 from 9

3.2 Assembly

Requirements:

nThe drain has been mounted.

nA suitable sealing collar is available.

nThe flange is free of heavy soil.

nThe complete surface of the flange is lined with material and undam-

aged.

If required, clean the flange of coarse soil (e. g. from screed).

Insert sealing ring.

The sealing ring must lie in the groove between the flange and the

screw holes.

INFO! The Viega sealing collar has two differently coated sides.

One side is coated with bitumen and the other side with EPDM. If

the additional sealing takes place with bitumen sealing lanes, the

sealing collar must be used with the bitumen side facing

upwards. If EPDM sealing lanes are used, the EPDM side must

face upwards.

Position the sealing collar in such a way that the screw holes are

visible through the recesses.

Position the clamping ring on the sealing collar in such a way that

the screw holes are visible through the recesses.

Handling

Advantix clamping ring 8 from 9

Screw the clamping ring tightly to the flange.

Thread in the mounting screws in the screw holes only.

ðThe drain is sealed and the remaining sealing collars can be

laid.

3.3 Disposal

Separate the product and packaging materials (e. g. paper, metal,

plastic or non-ferrous metals) and dispose of in accordance with valid

national legal requirements.

Handling

Advantix clamping ring 9 from 9

Tabla de contenidos

Otros manuales de Producto de plomería de Viega

Viega

Viega Prevista Dry Manual de usuario

Viega

Viega Advantix base unit Manual de usuario

Viega

Viega Multiplex Trio E 6146.221 Manual de usuario

Viega

Viega Prevista 8640.14 Manual de usuario

Viega

Viega 8611.2 Manual de usuario

Viega

Viega 6161.52 Manual de usuario

Viega

Viega 8650.1 Manual de usuario

Viega

Viega Multiplex Trio F Series Manual de usuario

Viega

Viega Prevista Dry WC Manual de usuario

Viega

Viega Tempoplex Plus 6960 Manual de usuario

Viega

Viega MegaPress 304 Manual de usuario

Viega

Viega Megapress Manual de usuario

Viega

Viega 4981.81 Manual de usuario

Viega

Viega BETTE Multiplex Trio F Manual de usuario

Viega

Viega Eco Plus Manual de usuario

Viega

Viega 8159 Manual de usuario

Viega

Viega Eco Plus Manual de usuario

Viega

Viega Visign for Public 6 8326.15 Manual de usuario

Viega

Viega Eco Plus 8130.2 Manual de usuario

Viega

Viega 8624.1 Manual de usuario

Viega

Viega 8536.31 Manual de usuario

Viega

Viega Prevista Pure 8512 Manual de usuario

Viega

Viega Eco Plus 1F Manual de usuario

Viega

Viega PureFlow Press Zero Lead Hoja de instrucciones

Manuales populares de Producto de plomería de otras marcas

Weka

Weka 506.2020.00E Instrucciones de funcionamiento

Kohler

Kohler K-6228 Instrucciones de montaje

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manual de usuario

American Standard

American Standard DetectLink 6072121 Manual de usuario

Uponor

Uponor Contec TS Manual de usuario

Pfister

Pfister Selia 49-SL Manual de usuario

Fortis

Fortis VITRINA 6068700 Manual de usuario

Fortis

Fortis MILANO 78211JS Manual de usuario

Kohler

Kohler K-12183 Instrucciones de montaje

Maxxus

Maxxus MX-M206-01 Manual de usuario

Moen

Moen 5922 Series Manual de usuario

Kohler

Kohler Centerset K-15240 Instrucciones de montaje

Sanela

Sanela Lema SLP 59RB Manual de usuario

Elkay

Elkay EDF15AC Manual de instalación

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manual

baliv

baliv WT-140 Manual de usuario

Kohler

Kohler Mira Eco Manual de operación

BELLOSTA

BELLOSTA romina 0308/CC Manual de usuario