Victron energy CCGX Manual de usuario

2020-11-11 18:40 1/2 CCGX: Upgrading to v2

Victron Energy - https://www.victronenergy.com/live/

CCGX: Upgrading to v2.00

Unlike previous updates, v2.00 can not be installed from the internet. Instead it needs a one time

manual upgrade. After this, future updates can be installed automatically from the internet again.

A microSD card is needed. It is not possible to use an USB stick.

The upgrade procedure:

Download venus-upgrade-image.card1.

Unzip it, and put its contents on a microSD card. The card needs to be formatted with either a2.

FAT or FAT32 ﬁle system.

Click ‘Safely remove hardware’ or another eject function on your computer.3.

Take the card out4.

Insert the card into the Ccgx5.

Press and hold (!) button E6.

Shortly press A and B at the same time (still hold button E!)7.

The screen will now brieﬂy switch oﬀ, then turn solid blue and show ‘prepare update’8.

Release button E9.

Next you’ll see the update progressing, all kinds of technical details ﬂying by.10.

After approximately 2 minutes, you’ll see “Remove SD/USB medium and reset system”11.

So, remove the card, and press buttons A and B again to reboot.12.

Upgrade complete already! But make sure to double check a few things:

All settings in the connected devices (Multis, BMV, Solar Charger etcetera) won’t be aﬀected.

Also all settings in the ccgx won’t be aﬀected. But still it is good to double check that.

Especially double check wiﬁ and/or ethernet passwords and IP conﬁguration.

For developers and people that customize the ccgx, make sure to read these developer notes on the

v2.00 upgrade.

Troubleshooting

Last update: 2016-12-14

11:35 ccgx:ﬁrmware_upgrade_to_v2 https://www.victronenergy.com/live/ccgx:ﬁrmware_upgrade_to_v2?rev=1481711722

https://www.victronenergy.com/live/ Printed on 2020-11-11 18:40

It restart normally and doesn't start the upgrade

Make sure to hold (!) button E till the upgrade starts

A blue screen is shown while booting and eventually "Starting" is displayed

This means that the button pressing procedure was done OK, but that the CCGX did not ﬁnd an

update on the sd card. Common causes:

There is a problem with the formatting of the microSD card. Make sure it is formatted as FAT or1.

FAT32.

Not all ﬁles are on the microSD card. Make sure to unzip the zip ﬁle and put all contents on the2.

root folder on the card.

The sdcard is broken. (very rare, check item 1 and 2 ﬁrst)3.

The sdcard-slot on the CCGX is broken. (also very rare)4.

The screen stays solid blue (no Victron logo) and stays like that forever

Make sure button A is released after resetting. Pressing both A and E after a reset will interrupt the

boot. Try again, and release A before B.

DISQUS

View the discussion thread.

From:

https://www.victronenergy.com/live/ - Victron Energy

Permanent link:

https://www.victronenergy.com/live/ccgx:ﬁrmware_upgrade_to_v2?rev=1481711722

Last update: 2016-12-14 11:35

Otros manuales para CCGX

9

Tabla de contenidos

Otros manuales de Controladores de Victron energy

Victron energy

Victron energy BlueSolar MPPT 150/35 Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/35 Manual de usuario

Victron energy

Victron energy CCGX Instrucciones de funcionamiento

Victron energy

Victron energy VBC 12-24-48V Manual de usuario

Victron energy

Victron energy SmartSolar MPPT 100/30 Manual de usuario

Victron energy

Victron energy Cerbo GX Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 100/30 Manual de usuario

Victron energy

Victron energy VE.Bus BMS Manual de usuario

Victron energy

Victron energy SmartSolar MPPT 150/85 Series Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/45-Tr Manual de usuario

Victron energy

Victron energy BlueSolar PWM 12V/24V 30A Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/70 Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 75/10 Manual de usuario

Victron energy

Victron energy BlueSolar PWM-Pro Series Manual de usuario

Victron energy

Victron energy BlueSolar PWM-Light 12/24-5 Manual de usuario

Victron energy

Victron energy BlueSolar PWM Series Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/35 Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/70 Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/70-Tr Manual de usuario

Victron energy

Victron energy MultiPlus-II 48/3000/35-32 230V GX Manual de usuario

Victron energy

Victron energy MPPT Control Manual de usuario

Victron energy

Victron energy Lynx Smart BMS Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/70-Tr Manual de usuario

Victron energy

Victron energy BlueSolar MPPT 150/60 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario