Viavi SmartPocket OLP-39G Manual de usuario

OLP-39G/-39X

SmartPocket™ V2

TruePON Tester

User manual

BN 2336/98.11

2022.04

English

Please direct all inquiries to your local Viavi sales company.

The addresses can be found at:

www.viavisolutions.com/en-us/contact-sales-expert

The description of additional features of the device can be found at:

www.viavisolutions.com/en-us/products/network-test-and-certification

Copyrights

This product or parts of this product are based on recommendations

and/or standards from the standardization section of the International

Telecommunication Union – ITU-T and/or the European

Telecommunications Standards Institute – ETSI. These recommendations

and standards are subject to the proprietary rights of these

organizations. It is not permitted to copy ITU-T recommendations or

ETSI standards fully or in part and/or to pass them on to third parties

without prior written permission from ITU-T and/or ETSI.

Viavi and the Viavi logo are trademarks of Viavi Solutions Inc.

All other trademarks and registered trademarks are the property of their

respective owners.

Viavi Solutions Deutschland GmbH

Arbachtalstraße 5, 72800 Eningen u. A., Germany

Order number: BN 2336/98.11

Issue: 2022.04

Previous issue: --

Notes:

Changes may be made to specifications, designations and delivery

information.

OLP-39G/-39X TruePON Tester 3

CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

OLP-39G/-39X TruePON Tester . . . . . . . . . . . . . . . . . . . . . . . 5

User manual update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Symbols used in this user manual . . . . . . . . . . . . . . . . . . . . . 7

SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Unpacking the device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Device overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Switching the device on/off . . . . . . . . . . . . . . . . . . . . . . . . . 15

Selecting a power mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Selecting a PON mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

DISPLAY OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

PON mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

TruePON mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

PON MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Selecting an operation mode . . . . . . . . . . . . . . . . . . . . . . . . 18

Selecting a display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Absolute power level mode . . . . . . . . . . . . . . . . . . . . . . . . . 19

Loss mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Pass/Fail mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

TRUEPON MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Selecting an operation mode . . . . . . . . . . . . . . . . . . . . . . . . 22

Selecting a Pass/Fail display mode . . . . . . . . . . . . . . . . . . . 23

Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Setting the ODN class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Performing a TruePON measurement . . . . . . . . . . . . . . . . . 25

Recalling measurement results. . . . . . . . . . . . . . . . . . . . . . . 26

SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Instrument settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

PON settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

TruePON settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4 OLP-39G/-39X TruePON Tester

CONTENTS

MEMORY MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . 31

General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Storing measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Recalling measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Deleting measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

DATA EXPORT AND FIRMWARE UPDATE . . . . . . . . . . . . . . 33

USB and SmartReporter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Bluetooth® and MobileTech app /

StrataSync cloud (future application) . . . . . . . . . . . . . . . . . 33

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Cleaning the test port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Cleaning the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

OLP-39G/-39X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

ORDERING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . 38

OLP-39G, OLP-39X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Calibration report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Smart Reporter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

PRODUCT REGULATORY COMPLIANCE . . . . . . . . . . . . . . . 39

OLP-39G/-39X TruePON Tester 5

OLP-39G/-39X TRUEPON TESTER

1 INTRODUCTION

1INTRODUCTION

OLP-39G/-39X TruePON Tester

The OLP-39G/-39X is a specialized TruePON Tester designed for

use cases such as system/network qualification, subscriber

activation, and troubleshooting of passive optical network (PON).

The instrument performs wavelength selective optical power

measurements suitable for testing G-PON networks, as defined

in ITU-T G.983/4 or IEEE 802.3ah (OLP-39G) and XGS-PON

networks, as defined in ITU-T G.9807.1 respectively (OLP-39X).

In TruePON mode the OLP-39G/-39X identifies the OLT-ID, ODN

class, and loss based on the TOL (Transmitted Optical Level from

OLT), while the ODN class can be recognized automatically or set

manually.

An integrated pass/fail analysis feature simplifies standard

conformity and optical budget/margin testing, and provides

unambiguous measurement result presentation.

With PC-based reporting, all test results can be summarized in a

professional, industry-proven report.

Main features

The OLP-39G/-39X offers many helpful features that are optimized

to workflows of typical telecom operators, and thus ensure that

test times are kept as short as possible.

• OLT-ID, ODN class and loss based on TOL for G-PON (OLP-39G)

and XGS-PON (OLP-39X)

• Display of G-PON and XGS-PON results separately or

simultaneously (OLP-39X)

• Accurate and repeatable wavelength selective power

measurements

• Unambiguous pass/fail result presentation and user definable

pass/fail thresholds

• Data storage for up to 1000 measurements

• USB-C interface for measurement data transfer to a laptop/PC

• Easy operation and instantly ready to operate

• Versatile power supply options using dry or rechargeable

batteries or via the USB-C interface

• Automatic power-off (can be disabled)

• Color-coded test head cover for easy distinction between APC

and PC connector types

• Smart-Reporter PC software for data management and report

generation

6 OLP-39G/-39X TruePON Tester

1 INTRODUCTION

USER MANUAL UPDATE

Description of OLP-39G and OLP-39X features in

this manual

In this user manual the OLP-39X with G-PON and XGS-PON is

described. Please note that for the OLP-39G only G-PON is

available.

User manual update

If the operating instructions about features provided by your

device are missing, please visit the Viavi web site to check if

additional information is available.

To download the latest operating instructions:

1. Visit the Viavi web site at www.viavisolutions.com.

2. Search for SmartPocket.

3. Open the download area and download the operating

instructions if available.

OLP-39G/-39X TruePON Tester 7

SYMBOLS USED IN THIS USER MANUAL

1 INTRODUCTION

Symbols used in this user manual

Various elements are used in this user manual to draw attention

to special meanings or important points in the text.

Symbols and terms used in warnings

The following warnings, symbols and terms are used in this

document in compliance with the American National Standard

ANSI Z535.6-2011:

NOTICE

Follow the instructions carefully to avoid damage to or

destruction of the instrument.

CAUTION

Follow the instructions carefully to avoid a low or medium risk

of injury to persons.

WARNING

Follow the instructions carefully to avoid potential death or

severe injury to persons.

DANGER

Follow the instructions carefully to avoid death or severe

injury to persons.

High Voltage

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to high

voltage.

Laser

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to laser

radiation. Information specifying the laser class is also given.

8 OLP-39G/-39X TruePON Tester

1 INTRODUCTION

SYMBOLS USED IN THIS USER MANUAL

Warning format

All warnings have the following format:

The following character formats are used in this user manual:

WARNING

Type and source of danger

Consequences of ignoring the warning

JAction needed to avoid danger.

IRequirement

This requirement must be met first; e.g.

IThe device is switched on.

Instruction

Follow the instructions given (the numbers indicate the order

in which the instructions should be followed); e.g.

JSelect mode.

Italics Result

Indicates the result of following an instruction; e.g.

The page opens.

Bold

type face

Pages, controls, and display elements

Screen pages, controls, and display elements are indicated in

bold type.

Text in

blue

Cross references

Cross references are indicated in blue type. When using the

PDF version, just click on the blue text to skip to the cross

reference.

[MODE] Device keys

Device keys are indicated within square brackets.

[]The three sensitive keys are indicated as squares, the active key

is highlighted.

OLP-39G/-39X TruePON Tester 9

SYMBOLS USED IN THIS USER MANUAL

2 SAFETY INFORMATION

2SAFETY INFORMATION

JAll safety information for your device can be found in the

printed booklet “Safety, Disposal and Environmental

Protection“ provided with your device.

JCarefully read and follow all instructions given there.

JThe booklet “Safety, Disposal and Environmental

Protection“ is attached to this PDF. You can open it from

the attachment window or by clicking the thumbnail on

the left.

10 OLP-39G/-39X TruePON Tester

3 GETTING STARTED

UNPACKING THE DEVICE

3GETTING STARTED

Unpacking the device

Packing material

We suggest that you keep the original packing material. It is

designed for reuse (unless it is damaged during shipping). Using

the original packing material ensures that the device is properly

protected during shipping.

Checking the package contents

Your device is shipped with the following accessories:

• 2.5 mm universal adapter

• 2 dry batteries AA

• User manual

• Belt bag

Checking for shipping damage

After you unpack the device, check to see if it has been damaged

during shipping. This is particularly likely if the packaging is

visibly damaged. If there is damage, do not attempt to operate

the device. Doing so can cause further damage. In case of

damage, please contact your local Viavi Sales Company.

Addresses can be found at www.viavisolutions.com.

Recovery following storage/shipping

Condensation can occur if a device that is stored or shipped at a

low temperature is brought into a warm environment. To prevent

damage, wait until no more condensation is visible on the

surface of the device before powering it up. Do not operate the

instrument until it has reached its specified temperature range

and wait until it has cooled down if the instrument was stored at

a high temperature (see “Environmental conditions” on

page 35).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Viavi

Viavi

Viavi Smart Class 4800 Manual de usuario

Viavi

Viavi OLP-88 Manual de usuario

Viavi

Viavi PSD90-3 Manual de usuario

Viavi

Viavi ATC-5000NG Manual de usuario

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi 3900 Series Manual del propietario

Viavi

Viavi SmartClass OLP-85 Series Manual de usuario

Viavi

Viavi 3900 Series Manual de usuario

Viavi

Viavi 8800SX Manual de usuario

Viavi

Viavi T-BERD/MTS 5800 Manual de usuario

Viavi

Viavi 3900 Series Manual de usuario

Viavi

Viavi SmartOTDR Manual de lista de piezas

Viavi

Viavi T-BERD/MTS-580 Guía de instalación

Viavi

Viavi OTU-8000 Manual de lista de piezas

Viavi

Viavi HST-3000 Manual de usuario

Viavi

Viavi OneAdvisor ONA-1000 400G Manual técnico

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi MTS 2000 Manual de lista de piezas

Viavi

Viavi T-BERD 5800 Manual de usuario

Viavi

Viavi T-BERD MTS 5800 Manual de usuario

Viavi

Viavi T-BERD/MTS 5800 Manual de usuario

Viavi

Viavi OneAdvisor 1000 Manual de usuario

Viavi

Viavi ALT-9000 Manual de lista de piezas

Viavi

Viavi SmartClass Fiber OLTS-85 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario