VIA Technologies VIA P4PB 266E Manual de usuario
i
VIA Mainboard
User’s Manual
VIA P4PB 266E
Version 1.0 - June 20th, 2002
P/N 99-51-010711
ii
Copyright
Copyright by VIA Technologies Inc. (“VIA”). No part of this manual may be
reproduced or transmitted in any form without express written authorization
from VIA.
Trademarks
All trademarks are the property of their respective holders.
Data protection
All data should be backed-up prior to the installation of any drive unit or
storage peripheral. VIA will not be responsible for any loss of data resulting
from the use, disuse or misuse of this or any other VIA product.
No Warranty
VIA has made every effort to ensure the accuracy of the content of this
manual. However, it is possible that it may contain technical inaccuracies or
typographical or other errors. VIA will assume no liability for any inaccuracy
found in this publication, nor for damages, direct, indirect, incidental,
consequential or otherwise, that may result from such an inaccuracy,
including without limitation loss of data or profits.
VIA provides this manual “as is”, and does not issue a warranty of any kind,
express or implied, including without limitation implied warranties of
merchantability or fitness for a particular purpose.
The information provided in this manual is subject to change without
notice. VIA reserves the right to alter product designs, layouts or drivers
without notification.
iii
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
iv
TRADEMARKS
All trademarks used in this manual are the property of their respective owners.
Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 and OS/2 are registered trademarks of IBM Corporation.
Windows 95/98/98SE/2000/XP and Windows NT are registered trademarks of
Microsoft.
Netware is a registered trademark of Novell.
Award is a registered trademark of Award Software Inc.
NOTE
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection and protect the equip-
ment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
7. Place the power cord such a way that people cannot step on it. Do not place
anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening. Doing so could cause damage or
electrical shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
* The power cord or plug is damaged
* Liquid has penetrated into the equipment
* The equipment has been exposed to moisture
* The equipment does not work well or does not work according to
the User’s Manual.
* The equipment has dropped or damaged
* The equipment has been visably damaged
12.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED,STORAGETEMPERATUREABOVE600
C(1400F),ITMAY
DAMAGE THE EQUIPMENT.
v
Box Contents
• 1 x VIA Mainboard
• 1 x User’s Manual
• 1 x Quick Installation Guide
• 1 x Floppy Ribbon Cable
• 1x ATA-33/66/100/133 IDE Ribbon Cable
• 1 x 2-Port USB 2.0/1.1 Module
• 1 x Audio Bracket
• 1 x Driver Utilities CD
vi
Contents
Chapter 1. Specifications ..................... 1-1
MainboardSpecifications .................................................. 1-2
Mainboard Layout ............................................................ 1-4
Connectors Guide ............................................................. 1-5
Chapter 2. Installation.......................... 2-1
CPUInstallation ................................................................ 2-2
CPU Installation ............................................................... 2-2
CPU Core Speed.............................................................. 2-3
CPU Fan Installation ........................................................ 2-3
MemoryInstallation ........................................................... 2-5
DDR Module Installation .................................................. 2-6
Power Supply ................................................................... 2-7
ATX 20-Pin Power Connector: ATXPWR....................... 2-7
ATX 12V Power Connector: AUX12V ........................... 2-7
Back Panel ....................................................................... 2-8
Mouse Connector: JMS1 .................................................. 2-8
Keyboard Connector: JKB1 ............................................. 2-8
USB Port Connectors....................................................... 2-9
Parallel Port Connector: LPT1 ......................................... 2-9
Serial Port Connectors: COM 1 & COM 2.................... 2-10
MIDI/Game Connector .................................................. 2-10
Audio Port Connectors ................................................... 2-10
RJ45 NIC Po(optional)................................................2-10
Connectors .................................................................... .2-11
Floppy Disk Drive Connector: FDD ................................ 2-11
IrDA Infrared Module Connector: SIR ...........................2-11
Hard Disk Connectors: IDE1 & IDE2 ........................... 2-12
CD-In Connector: CD_IN ............................................. 2-13
Aux Line-In Connector: AUX_IN ................................. 2-13
vii
Modem-In Connector: Modem_IN ................................ 2-13
Fan Power Connectors: CPU/SYS/PWR FAN ............. 2-14
Case Connectors: F_PANEL ......................................... 2-14
Audio Header Connector: Audio_Header ...................... 2-16
USB pin-header: USB3~6 .............................................. 2-17
Wake-On LAN Connector: WOL .................................. 2-17
Wake-On Ring Connector: WOR ................................... 2-18
1394 pin-header(optional) .............................................. 2-18
PC Smart Card Reader: SCR......................................... 2-19
Jumpers .......................................................................... 2-20
Clear CMOS Jumper: CLEAR_CMOS ......................... 2-20
Audio Codec Auto Detect Jumper: OB_CODEC ......... 2-21
CPU FSB Setting Jumper Switch: SW1........................2-21
Slots ............................................................................... 2-22
AGP (Accelerated Graphics Port) Slot .......................... 2-22
PCI Slots ........................................................................ 2-22
CNR (Communication Network Riser) .......................... 2-22
PCI Interrupt Request Routing ....................................... 2-23
Chapter 3. BIOS Setup......................... 3-1
Entering Setup ................................................................... 3-2
Control Keys .................................................................... 3-2
Getting Help ...................................................................... 3-3
The Main Menu ................................................................ 3-4
Standard CMOS Features ................................................ 3-6
Advanced BIOS Features ................................................. 3-8
Advanced Chipset Features............................................. 3-11
Integrated Peripherals ...................................................... 3-13
Power Management Setup .............................................. 3-16
PNP/PCI Configurations ................................................. 3-21
PC Health Status............................................................. 3-23
viii
Frequency/Voltage Control .............................................. 3-24
Load Fail-Safe Defaults ................................................... 3-27
Load Optimized Defaults ................................................. 3-28
Set Supervisor/User Password ........................................ 3-29
Save & Exit Setup ........................................................... 3-31
ExitWithoutSaving ......................................................... 3-32
Chapter 4. Software Setup ................... 4-1
Utility Driver CD Content .................................................. 4-2
Getting Started .................................................................. 4-2
Running the Driver Utility CD .......................................... 4-2
CD Content ...................................................................... 4-2
1-1
Specifications
Specifications
1
The VIA P4PB 266E mainboard is based around
the VIA Apollo P4X266E chipset, which brings sup-
port for high-performance DDR SDRAM to the Intel®
Pentium® 4 platform. VIA’s advanced 266 MB/s 8-bit
V-Link controller brings optimal system efficiency by
effectively doubling bandwidth between the chipset’s
north and south bridges. Designed for the latest 478-
pin Pentium®4 processors, these ATX sized mainboards
are the perfect choice for Pentium 4 based high- per-
formance PCs, servers and workstations.
This chapter includes the following sections:
Mainboard Specifications 1-2
Mainboard Layout 1-4
Connectors Guide 1-5
1-2
Chapter 1
CPU
•Supports Intel®Pentium®4 Willamette/Northwood and Celeron®processors
in the 478 pin package
•Supports 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz, 2GHz, 2.2GHz and upwards
Chipset
•VIA Apollo P4X266E chipset (VT8753E & VT8235)
- Supports Intel®Pentium®4 processors with 400MHz (100MHz QDR) and
533MHz (133MHz QDR) CPU Front Side Bus (FSB)
- AGP v2.0 compliant with 4X (1.5V) transfer mode
- High Bandwidth 266 MB/s 8-bit V-Link Client controller
- Integrated Hardware Sound Blaster/Direct Sound AC’97 audio
- Ultra DMA 66/100/133 master mode PCI EIDE controller
- ACPI 1.0B and APM 1.2 compliant
Main Memory
•3 x 184-pin DDR DIMM sockets
• Supports up to 3GB of 2.5v DDR266 SDRAM (PC2100/PC1600)
Slots
• 1 x AGP (Accelerated Graphics Port) 4X slot(1.5V)
• 5 x PCI 2.2 32-bit PCI bus slots (supports 3.3v/5v PCI bus interface)
• 1 x CNR (Communication Network Riser) slot
Onboard IDE
• Integrated IDE controller provides IDE HDD/CD-ROM with PIO, Bus Master
and Ultra DMA 66/100/133 operation modes
• Can connect up to 2 channels for 4 IDE devices
Mainboard Specifications
Tabla de contenidos
Otros manuales de Placa madre de VIA Technologies
VIA Technologies
VIA Technologies EPIA-P710 Manual de usuario
VIA Technologies
VIA Technologies VB8001 Manual de usuario
VIA Technologies
VIA Technologies COMe-8X92 Manual de usuario
VIA Technologies
VIA Technologies EPIA-P720 Manual de usuario
VIA Technologies
VIA Technologies EPIA-M920 Manual de usuario
VIA Technologies
VIA Technologies VX900 Manual de usuario
VIA Technologies
VIA Technologies EPIA-M900 Manual de usuario
VIA Technologies
VIA Technologies EPIA-EK10000G - VIA Motherboard - Mini ITX Manual de usuario
VIA Technologies
VIA Technologies EPIA-M720 Manual de usuario
VIA Technologies
VIA Technologies NAS 7800 Manual de usuario
VIA Technologies
VIA Technologies EPIA-P830 Manual de usuario
VIA Technologies
VIA Technologies EPIA M-Series Mini-ITX Manual de instrucciones
VIA Technologies
VIA Technologies PT-DVBX Manual de usuario
VIA Technologies
VIA Technologies EPIA Manual de usuario
VIA Technologies
VIA Technologies EPIA-CN13000G - VIA Motherboard - Mini ITX Manual de usuario
VIA Technologies
VIA Technologies VT82C686A Manual de usuario
VIA Technologies
VIA Technologies EPIA-N800 Manual de usuario
VIA Technologies
VIA Technologies EPIA-M850 Manual de usuario
VIA Technologies
VIA Technologies P4PB ULTRA-URL Manual de usuario
VIA Technologies
VIA Technologies P4M266A Manual de usuario
VIA Technologies
VIA Technologies EPIA-M700 Manual de usuario
VIA Technologies
VIA Technologies P4PA Manual de usuario
VIA Technologies
VIA Technologies ARTIGO A2000 - VIA ARTiGO Barebone Storage... Manual de usuario
VIA Technologies
VIA Technologies ARTIGO A2000 - VIA ARTiGO Barebone Storage... Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
