VIA Technologies P4XB-MA Manual de usuario

Version 1.0

December 5, 2001

VIA Mainboard

User’s Manual

VIA P4XB-MA

Harnessing the Power of DDR266 SDRAM

for the Intel®Pentium®4 Processor

be reproduced or transmitted in any form without express written

authorization from VIA.

Trademarks

All trademarks are the property of their respective holders.

Data protection

All data should be backed-up prior to the installation of any drive unit or

storage peripheral. VIA will not be responsible for any loss of data resulting

from the use, disuse or misuse of this or any other VIA product.

NoWarranty

VIA has made every effort to ensure the accuracy of the content of this

manual. However, it is possible that it may contain technical inaccuracies

or typographical or other errors. VIA will assume no liability for any

inaccuracy found in this publication, nor for damages, direct, indirect,

incidental, consequential or otherwise, that may result from such an

inaccuracy, including without limitation loss of data or profits.

VIA provides this manual “as is”, and does not issue a warranty of any

kind, express or implied, including without limitation implied warranties of

merchantability or fitness for a particular purpose.

The information provided in this manual is subject to change without

notice. VIA reserves the right to alter product designs, layouts or drivers

without notification.

iii

FCC-BRadioFrequencyInterferenceStatement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

VIAP4XB-M

Testedtocomply

withFCCStandard

ForHomeorOfficeUse

We take every care in the preparation of this document, but no guarantee is

given as to the correctness of its contents. Our products are under continual

improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

NOTE

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the

equipmentfromoverheating. DONOTCOVERTHEOPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord in such a way that people cannot step on it. Do not

place anything over the power cord.

8. Always unplug the power cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Liquid can cause damage or elec-

trical shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

The power cord or plug is damaged

Liquid has penetrated into the equipment

The equipment has been exposed to moisture

The equipment has not work well or you can not get it work according

to User’s Manual.

The equipment has dropped and damaged

If the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED,STORAGETEMPERATUREABOVE600C(1400F),IT

MAYDAMAGETHEEQUIPMENT.

CAUTION: Explosion or serious damage may occur if the battery is

incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer.

Safety Instructions

Box Contents

•1 x VIA Mainboard

•1 x User’s manual

•1 x Floppy ribbon cable

•1 x ATA-66/100 Hard drive ribbon cable

•1 x 2 Port USB Module

•1 x Driver Utilities CD

vii

CONTENTS

Chapter 1. Specifications ......................................................................... 1-1

Mainboard Specifications .................................................................... 1-2

Mainboard Layout ...............................................................................1-4

Chapter2. Installation.............................................................................. 2-1

CPU ......................................................................................................2-2

CPU Installation Procedure ...........................................................2-2

Installing the CPU Fan ..................................................................2-3

CPU Core Speed Derivation Procedure .........................................2-4

Memory Installation ............................................................................. 2-5

DDR SDRAM Module Installation Procedures.............................2-6

Power Supply .......................................................................................2-7

ATX 20-Pin Power Connector: JWR1 ............................................2-7

ATX 12V Power Connector: JPW1 ................................................2-7

BackPanel ............................................................................................2-8

Mouse Connector: JKBMS1 .........................................................2-8

Keyboard Connector: JKBMS1 ..................................................... 2-8

LANJack(RJ-45) ...........................................................................2-8

USB Connectors............................................................................2-8

Serial Port Connectors: COM A & COM B....................................2-8

Joystick/Midi Connector ............................................................... 2-8

Audio Port Connectors .................................................................2-9

Parallel Port Connector: LPT1........................................................2-9

Connectors......................................................................................... 2-10

Floppy Disk Drive Connector: FDD1........................................... 2-10

Power Saving Switch Connector: JGS1........................................ 2-10

Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-11

Case Connector: JFP2.................................................................. 2-12

viii

HDDLED..................................................................................... 2-13

CD-In Connector: J2 .................................................................... 2-14

Aux Line-In Connector: J6........................................................... 2-14

Modem-In Connector: J5 ............................................................. 2-14

IrDA Infrared Module Connector: IR1 & IR2 .............................. 2-15

Front Panel Audio Connector: JAUDIO1 .................................... 2-16

Wake On Ring Connector: JMDM1............................................. 2-17

Wake On LAN Connector: JWOL1.............................................. 2-17

Fan Power Connectors: PFAN1/SFAN1 ...................................... 2-18

USB Front Connector: USB2 (Intel spec) .................................... 2-19

Remote Power On/Off Switch Connector: JRMS1 ....................... 2-20

Jumpers .............................................................................................. 2-21

Clear CMOSJumper: JBAT1 ........................................................ 2-21

Slots ................................................................................................... 2-22

AGP (Accelerated Graphics Port) Slot......................................... 2-22

PCI Slots ...................................................................................... 2-22

CNR(Communication NetworkRiser) ......................................... 2-22

PCI Interrupt Request Routing .................................................... 2-23

Chapter3.AwardBIOSSetup .................................................................. 3-1

Entering Setup......................................................................................3-2

Control Keys ........................................................................................ 3-2

Getting Help .........................................................................................3-3

The Main Menu ................................................................................... 3-4

Standard CMOS Features ....................................................................3-6

Advanced BIOS Features ....................................................................3-8

Advanced Chipset Features............................................................... 3-11

Integrated Peripherals ........................................................................ 3-16

Power Management Setup ................................................................. 3-22

PNP/PCI Configurations..................................................................... 3-26

PC Health Status ................................................................................ 3-28

Frequency/Voltage Control ................................................................ 3-29

Load Fail-Safe Defaults ...................................................................... 3-31

Load Optimized Defaults .................................................................... 3-32

Supervisor/User Password................................................................. 3-33

Save & Exit Setup............................................................................... 3-35

Exit Without Saving ........................................................................... 3-36

Chapter4.DriverSetup ............................................................................ 4-1

VIA Apollo P4X266A Chipset Driver ...................................................4-2

Realtek ALC201A Audio Driver ...........................................................4-7

Introduction

1-1

The VIA P4XB-MA Micro ATX mainboard is a high per-

formance mainboard based on VIA Apollo P4X266A

chipset. The VIA Apollo P4X266A chipset brings sup-

port for high bandwidth DDR266 SDRAM to the Intel®

Pentium®4 processor platform, and utilizes advanced V-

Link technology for optimal system efficiency. Designed

for the latest 478-pin Pentium®4 processors, the P4XB-

MA offers the ideal platform for building powerful PCs

and workstations.

This chapter includes the following topics:

Mainboard Specifications 1-2

Mainboard Layout 1-4

Specifications

Tabla de contenidos

Otros manuales de Placa madre de VIA Technologies

VIA Technologies

VIA Technologies EPIA-P720 Manual de usuario

VIA Technologies

VIA Technologies EPIA-CN13000G - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies K8T800 Manual de usuario

VIA Technologies

VIA Technologies VT82C694X Pro Manual de usuario

VIA Technologies

VIA Technologies VTS-8589 Manual de usuario

VIA Technologies

VIA Technologies EPIA-N800 Manual de usuario

VIA Technologies

VIA Technologies P4M890DMP VT8237R Plus Manual de usuario

VIA Technologies

VIA Technologies VAB-950 Manual de usuario

VIA Technologies

VIA Technologies KT600 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M840 Manual de usuario

VIA Technologies

VIA Technologies EPIA-PX5000EG - VIA Motherboard - Pico ITX Manual de usuario

VIA Technologies

VIA Technologies VX900 Manual de usuario

VIA Technologies

VIA Technologies EPIA-NR Manual de usuario

VIA Technologies

VIA Technologies EPIA-SN Manual de usuario

VIA Technologies

VIA Technologies EPIA-MII Manual de usuario

VIA Technologies

VIA Technologies NAB-7500 Manual de usuario

VIA Technologies

VIA Technologies KM400 Manual de usuario

VIA Technologies

VIA Technologies NAS 7800 Manual de usuario

VIA Technologies

VIA Technologies EPIA LN-Series Manual de usuario

VIA Technologies

VIA Technologies EPIA-EN12000EG - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies P4X266-PE11-SA Manual de usuario

VIA Technologies

VIA Technologies EPIA-SP13000 - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies VAB-950 Manual de usuario

VIA Technologies

VIA Technologies VB8001 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario