Vanderbilt Eventys CKN3910 Manual de usuario
EN
Eventys IP Keyboard
User Manual
Doc ID.: C-301412
Edition: 05.04.2017
© Vanderbilt 2017
2
Copyright
Technical specifications and availability subject to change without notice.
© Vanderbilt 2017
We reserve all rights in this document and in the subject thereof. By acceptance of the
document the recipient acknowledges these rights and undertakes not to publish the
document nor the subject thereof in full or in part, nor to make them available to any third
party without our prior express written authorization, nor to use it for any purpose other than
for which it was delivered to him.
© Vanderbilt 2017
3
Table of contents
User Manual .......................................................................................................................1
1About this Manual ..............................................................................................5
2Regulatory Information......................................................................................6
2.1 Safety Instruction..................................................................................................7
2.2 Preventive and Cautionary Tips ...........................................................................8
2.3 Power Supply .......................................................................................................8
2.4 Product Key Features...........................................................................................9
3Introduction ......................................................................................................10
3.1 Front Panel .........................................................................................................10
3.2 Interfaces and Joystick.......................................................................................10
3.3 Functional Buttons..............................................................................................12
4Getting Started .................................................................................................14
4.1 Activating Your Device........................................................................................14
4.2Logging in ...........................................................................................................14
4.2.1 Local Login .........................................................................................................15
4.2.2 Remote Login (via Web browser).......................................................................15
4.3 System Menu......................................................................................................16
5Basic Configuration .........................................................................................17
5.1 Network Access Settings....................................................................................17
5.2 Device Mangement ............................................................................................17
5.2.1 Managing Devices by Web Browser ..................................................................17
5.2.2 Managing Input/Output Channels ......................................................................19
5.3 User and User-related Device Management......................................................21
6Keyboard Operation.........................................................................................22
6.1 Keyboard Operation ...........................................................................................23
6.1.1 Video Wall Control..............................................................................................23
6.1.2 Preset/Patrol/Pattern Calling..............................................................................24
6.1.3 Scene Calling .....................................................................................................25
6.1.4 AUX Functions ...................................................................................................25
6.2 MAG by IP ..........................................................................................................27
6.3 DVR by IP...........................................................................................................28
6.4 MAG by RS-422 .................................................................................................29
6.5 DVR by RS-485 ..................................................................................................31
6.6 Dome by RS-485 ................................................................................................32
6.7 Shortcut Operation .............................................................................................32
7System Menu Configuration ...........................................................................33
7.1 Version................................................................................................................33
7.2 User Management..............................................................................................33
7.3 RS-485/RS-422 Settings ....................................................................................34
Table of contents
© Vanderbilt 2017
4
7.4 Hardware ............................................................................................................34
7.5 Time Settings......................................................................................................35
7.6 Maintenance .......................................................................................................35
8Appendix ...........................................................................................................36
8.1 Specifications .....................................................................................................36
© Vanderbilt 2017
5
About this Manual
This Manual is applicable to Digital Video Recorder (DVR), NVR (Network Video Recorder) and PTZ device.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in
the company website
Please use this user manual under the guidance of professionals.
Legal Disclaimer
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT
IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
© Vanderbilt 2017
6
Regulatory Information
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2014/30/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier
or to a designated collection point. For more information see: www.recyclethis.info
Regulatory Information
© Vanderbilt 2017
7
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property
loss.
The precaution measure is divided into “Warnings” and “Cautions”.
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
end-user.
●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
and region. Please refer to technical specifications for detailed information.
●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100~240V AC or 12V DC according to the IEC60950-1 standard. Please refer to technical specifications for
detailed information.
●Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
hazard.
●Please make sure that the plug is firmly connected to the power socket.
●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and
then please contact the service center.
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
Regulatory Information
© Vanderbilt 2017
8
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Unit is designed for indoor use only.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit because of dropping it
may cause damage to the sensitive electronics within the unit.
•Use the device in conjunction with an UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries per the instructions provided by the manufacturer.
Power Supply
•Ensure that the AC power supply is stable and within the rated voltage of the unit. Use an uninterrupted
power supply (UPS) to ensure a continuous function of the unit in the event of power dips on the AC
mains supply. Suitable UPS devices can be ordered within the local IT market, e.g. APC SMT2200I or
others.
•Eventys IP Keyboard (CKN3910): Ensure that the total length of the power cable is less than 3m.
Regulatory Information
© Vanderbilt 2017
9
Product Key Features
General
LCD (Liquid Crystal Display) screen on-board, 128 x 64 pixel
35 function buttons
4-axis joystick
Control PTZ (Pan Tilt Zoom) dome cameras and picture capture through the joystick operation
Can be connected directly to Eventys DVR / NVR over the network for full control and operation
Can be connected directly to Speed Dome via the serial port supporting the following key protocols:
Pelco-D, Pelco-P
16 user accounts management: 1 admin and 15 operators
System upgrade and import / export of configuration files by USB-storage device
Network access and configuration by Web browser support
System notes related to existing features in the Eventys IP Keyboard:
MAG Matrix Access Gateway is NOT in use for Vanderbilt
Video Wall Control is NOT in use for Vanderbilt
MAG & Video Wall Control devices are 3rd party products and NOT included in the product portfolio of
Vanderbilt
3rd party products must be ordered by installers separately on their local market (e.g. from Hikvision)
The Eventys IP Keyboard is optimized to access and control DVR/NVR via network.
The Eventys IP Keyboard does not support Eventys RAS software.
The RS485 interface of the IP Keyboard works with the analogue Speed Dome only.
Vanderbilt recommend setting keyboard parameters, storing or loading configuration data, and setup
of all connected devices (IP cameras, Speed Domes, and NVR/DVR) through the Web browser. This
method is more convenient than using the built-in LCD display on the IP Keyboard.
The values for the Presets / Patrol function of Speed Domes must be defined in the Speed Dome
before activating through the IP Keyboard.
Some screenshots contain / describe functions of the above mentioned 3rd party products.
These descriptions are kept in the User Manual to avoid any mismatching firmware version with the
original manufacturer version.
Tabla de contenidos
