VALCOBABY T3 PLUS Manual de usuario
Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this
guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all
the warnings and safety guidelines before use.
Important: Please read the following instructions carefully before assembling this product. Retain this
guide in a safe place for future reference.
PRODUCT REFERENCE GUIDE
© Copyright VE 2009
Due to our policy of continuous product
development, this product is constantly evolving.
It is possible that some features or procedures
outlined here have changed since this document
was written. If you are unsure of any procedure
shown here, please contact us via the web at
date information before use. Include the batch
number, which can be found on a sticker on the
frame.
All pictures and diagrams herein are provided for
illustration purposes only. Actual product, colour
or fabric may vary. Valco Baby reserves the right
to modify or alter any specication or colour
without notice or obligation to modify any product
previously purchased
FURTHER INFORMATION
In Australia/New Zealand
www.veebee.com.au
In North America only
www.valcobaby.com
1800 610 7850
T3 PLUS
RECLINING STROLLER
STROLLER ASSEMBLY/OPENING
FIGURE A - ASSEMBLING YOUR STROLLER
1. Remove the carton contents carefully. Dispose of any
packaging materials thoughtfully.
2. Release the stroller from the locked position by lifting the
locking handle from locking rivet on the stroller frame.
HINT: You may have to squeeze the stroller legs and
handles closer together rst so as to release the tension
on the rivet.
3. Standing behind the stroller and holding it by the
handles, allow the wheels to fall forward.
4. With your foot, press down on the primary locking hinge
until the entire frame locks into the open position.
FIGURE B - ATTACHING THE REAR WHEELS
5. Identify the rear wheels by the red brake levers.
6. With the red levers facing to the rear, align the rear
wheel housing with the nylon housing on the rear frame
leg.
7. Insert rear wheel housing onto the rear leg and push
upward until you feel it lock into place.
8. Repeat for other leg.
IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES ARE
SECURELY ENGAGED BEFORE USE.
FIGURE C - ATTACHING THE FRONT WHEELS
9. Insert the front swivel wheel over the housing on the
front leg. Repeat for the other wheel.
10. To x the front wheels in the non swivel position, turn
the wheel so that the two notches on both housings line
up at the front.
11. Press the swivel lock down rmly until it locks into
place. To unlock, lift the swivel lock with your foot lock to
release.
FIGURE D - ATTACHING THE HOOD
12. Fasten the hood Velcro straps around the top of the
frame (a). Clip the hood clip onto the frame just above
the folding hinge (b) and snap the side down into place
to secure.
13. Repeat for the other side.
14. Snap the back of the hood to the corresponding snaps
found on the back of the seat.
A
B
C
D
a
b
CLICK
2
3
4
11
FOLDING YOUR STROLLER
FIGURE E - FOLDING YOUR STROLLER
15. Lift the primary safety lock (a) with your foot.
16. Press down on the secondary lock (b) with
your foot.
17. Simultaneously push the handles all the way
down to meet the wheels.
18. Secure the frame closed with the locking
handle.
FIGURE F - USING YOUR HARNESS
TO SECURE YOUR CHILD IN THE HARNESS:
Your child MUST always be harnessed while in the
Stroller.
TO OPEN YOUR HARNESS:
19. Push down on both Buckle Prongs.
20. Simultaneously press the release button in the
centre of the buckle.
21. Lift the buckles from the Buckle Housing.
This process may be difcult as your buckle
system has been designed to meet very stringent
safety standards to ensure that a child cannot
release the harness unaided.
TO SECURE YOUR CHILD IN THE HARNESS:
22. Overlap buckles and so that they t together to
form one complete buckle.
23. Insert the completed buckle into the Buckle Housing
until it engages securely in place.
FIGURE G - USING YOUR BRAKES
24. To activate the brake press down on each brake lever
until it engages in the brake cog on the wheel.
25. To release, lift each brake lever in turn.
WARNING: ALWAYS ENGAGE BOTH WHEEL BRAKES WHEN THE
STROLLER IS AT REST.
FIGURE H - ADJUSTING YOUR SEAT AND FOOTREST
26.To raise the seat, gently push the seat forward with your
thumbs into the desired position.
27. To recline the seat, simultaneously squeeze both
red seat recline levers and ease the seat back to the
desired position.
ALWAYS TEST THAT THE SEAT IS SECURELY FIXED IN POSITION
BEFORE USE.
28. To adjust your footrest downward,
simultaneously press the adjusting button
and hold in while pressing down on the
footrest.
FOR SAFETY, YOUR FOOTREST IS DESIGNED TO
COLLAPSE IF EXCESS WEIGHT IS APPLIED TO IT.
E
F
H
G
a
b
PUSH
PRESS
DOWN
HOLD
DOWN
RELEASE
HOLD
CLICK
27
In Australia/New Zealand
www.veebee.com.au
In North America only
www.valcobaby.com
1 800 610 7850
WARNING
• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
• PUT ON ALL THE BRAKES WHENEVER YOU PARK THE PRAM/STROLLER.
• DO NOT LEAVE CHILDREN UNATTENDED.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS PRAM/STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE PRAM/STROLLER. OTHERWISE THEY MAY
BE INJURED.
Remember, your child’s safety is your responsibility...
•NEVER USE ON STAIRS OR ESCALATORS.
• AlwAys use the tether strAp when the stroller is in use.
• the CorreCt use AnD MAintenAnCe oF this VehiCle Are essentiAl.
• Be sure thAt All ClAMps AnD BuCkles Are seCurely FixeD AnD in plACe BeFore use
• when in the stroller, your ChilD Must AlwAys weAr the sAFety hArness, CorreCtly FitteD AnD ADjusteD, At
ALL TIMES.
• the MAxiMuM weight oF the ChilD For whiCh this stroller wAs intenDeD is 18 kgs.
• CAn Be useD FroM A newBorn BABy onwArDs. A CoCoon, speCiAlly DesigneD to Be useD with A stroller, is
RECOMMENDED WHEN ANY FULLY RECLINING STROLLER IS USED WITH A NEWBORN.
• neVer run with A newBorn BABy in Any prAM or stroller until the ChilD CAn sit up unAssisteD
(APPROXIMATELY 6 MONTHS).
• CheCk All pArts BeFore use For BreAkAge or FAtigue. DisContinue use iMMeDiAtely iF Any pArt is FounD to Be
DAMAGED OR BROKEN.
• MAxiMuM loAD oF BAskets: 3.5kgs.
• Do not CArry ADDitionAl ChilDren. THIS STROLLER IS MANUFACTURED FOR THE USE WITH ONE CHILD ONLY
• AlwAys Be AwAre oF the risks proViDeD By Fire AnD other signiFiCAnt sourCes oF heAt suCh As rADiAtors,
ETC. WHICH MAY BE IN THE IMMEDIATE VICINITY OF YOUR STROLLER.
• it MAy Be unsAFe to use Any ACCessories other thAn VAlCo BABy ApproVeD ones.
• this proDuCt is intenDeD For DoMestiC use only. it is not intenDeD For CoMMerCiAl use.
Should the chassis become wet, dry off promptly before storing. If this pram is used near the ocean or salted
roads, spray the chassis and seat frame with water and dry. We recommend a rust inhibiting product should
be used to prevent rust and fatigue on metal parts.
We recommend that you wipe down axles and lubricate the wheels every 3 months. Sand and dirt can grind
down axles, if you live near the beach or in a dusty environment you must wipe down the axles and wheels
then lubricate them monthly.
AXLES ARE BEST LUBRICATED WITH GREASE OR PETROLEUM JELLY. MOVING PARTS ARE BEST LUBRICATED
WITH SILICONE BASED PRODUCTS. DO NOT USE OIL BASED PRODUCTS.
Tabla de contenidos
Otros manuales de Paseante de VALCOBABY
VALCOBABY
VALCOBABY Mini Marathon Manual de instalación y operación
VALCOBABY
VALCOBABY REBEL Q Manual de instalación y operación
VALCOBABY
VALCOBABY snap ultra Manual de instalación y operación
VALCOBABY
VALCOBABY Slim Twin Manual de instalación y operación
VALCOBABY
VALCOBABY BASSINET Manual de usuario
VALCOBABY
VALCOBABY TRI MODE EX Manual de instalación y operación
VALCOBABY
VALCOBABY RunAbout Tri-mode series Manual de instalación y operación
VALCOBABY
VALCOBABY Tri Mode Series Manual de instalación y operación
VALCOBABY
VALCOBABY ZEE Manual de instalación y operación
VALCOBABY
VALCOBABY Latitude Stroller Manual de instalación y operación
VALCOBABY
VALCOBABY Zee Spark Manual de instalación y operación
VALCOBABY
VALCOBABY URBAN ULTRALIGHT STROLLER Manual de instalación y operación
VALCOBABY
VALCOBABY Runabout Series Manual de instalación y operación
VALCOBABY
VALCOBABY ION Manual de instalación y operación
VALCOBABY
VALCOBABY REBEL Q Manual de instalación y operación
VALCOBABY
VALCOBABY BUGGSTER BASSINET Manual de instalación y operación
VALCOBABY
VALCOBABY MATRIX PLUS Manual de usuario
VALCOBABY
VALCOBABY Zee Manual de instalación y operación
VALCOBABY
VALCOBABY ION STROLLER Manual de instalación y operación
VALCOBABY
VALCOBABY Matrix Manual de instalación y operación
