Vacron Digital Video Recorder Manual de usuario
4CH / 8CH H.264
Digital Video Recorder
USER MANUAL
2013 FEB V1.0
optional
TYPE2
ii
WARNING
Do not expose the DVR under the sunlight, heat or
wet environment while installation. As it could
decrease the performance of DVR and damage the
machine.
Do not touch the power plug or case with wet hands
as this could result electric shock.
Do not forcedly bend or put heavy object on power
cable as this could result in injury to personal or
equipment.
Do not operate with damaged power cord or loose
electrical outlet as this could result in electric shock or
accident.
Please use individual power instead of share electrical
outlets with other electrical equipment as this could
result in damage or accident.
Do not attempt to service this DVR by yourself as it
may expose you to dangerous voltage or other
hazards. Please refer all service to the qualified
servicing distributor.
Do not open the covers or insert any object into DVR.
CAUTION
Do not place the machine on an uneven surface or it would
decrease the DVR efficiency or malfunction.
Avoid any shock or bumping of the DVR while recording.
Improper handling could damage the system.
CAUTION
Make sure the voltage selector switch is set
to appropriate setting before plug in!
iii
CONTENTS
1. Specification .............................................................................................1
2. Front Panel...............................................................................................2
3. Installation ................................................................................................3
4. DVR Installation........................................................................................3
5. System Operation.....................................................................................4
6. Display Setup ...........................................................................................6
7. Search ......................................................................................................7
8. Main Menu................................................................................................9
8.1 Camera Setup ..................................................................................9
8.2 Record Setup .................................................................................10
8.3 Motion Detection ............................................................................13
8.4 Network Setup (TYPE 2) ................................................................14
8.5 Log Search.....................................................................................16
8.6 Backup ...........................................................................................17
8.7 System ...........................................................................................18
8.7.1 Time Setting .........................................................................18
8.7.2 HDD Setup...........................................................................19
8.7.3 Display Setting .....................................................................20
8.7.4 System Information ..............................................................21
8.7.5 User Password.....................................................................21
8.7.6 System Language ................................................................22
8.7.7 Audio Setting........................................................................22
8.7.8 System Maintenance............................................................23
9. H264 Player Operation ...........................................................................24
10. Cell Phone Monitoring Operation (TYPE 2)............................................27
11. Web Operation (TYPE 2)........................................................................48
12. Default Setting ........................................................................................56
1
1. Specification
Video Format NTSC PAL
Video Input 4 CH Input / BNC
AudioInput 2CHInput/RCA
Video Output 1CH Output / BNC
Audio Output 1CH Output / RCA
XGA Output 800x600, 1024x768, 1280x1024, 1440x900
Display Mode Full Screen, 4CH Split Screen, Auto Switch, Picture in Picture
Display Resolution 720 x 480 720 x 576
Recording
Resolution
Highest 720 x 480 720 x 576
High 720 x 240 720 x 288
Normal 360 x 240 360 x 288
Recording Frame Max. 120 FPS Max. 100 FPS
Compression Algorithm H.264
Operating System Embedded Linux
Pentaplex Live / Record / Playback
Recording Mode Manual, Schedule, Event
Schedule Recording Full Recording, Motion, Manual Recording
Status Indicator Power Indicator, HDD Indicator
Event Mode Motion Trigger, Video Loss
Recording Duration: 10~60 sec.
Playback Mode
Normal Speed: x1
Fast Forward: x2 / x4 / x8 / x16 /x32multiple speed
Slow Forward: 1/2, 1/4, 1/8 multiple speed
Fast Rewind: x2 / x4 / x8 / x16 /x32
Frame by Frame Playback: Forward
Search Function: Time / Event
HDD Type SATA 3.5”HDD x 1 (No HDD Included)
Recommend use 1TB capacity for HDD or below
HDD Management Automatic Format System
Backup Device USB 2.0 Flash Memory Stick
Firmware Update Host USB
Multi-Language English / Chinese / Others
Control Mode Front Panel / Remote Control / USB Mouse
Network (TYPE 2)
Network Protocol TCP/IP / PPPoE / DHCP / SMTP / DDNS
Network Control IE Browser
Network Function Live Display / Playback / System Setup
Power Supply DC 12V / 2A (AC100V~240V 50/60HZ)
Unit Dimension 224mm (W)x 208mm (D) x 52 (H) mm
Weight Unit Weight 1.5kg
Operating Temperature 0℃~ 46℃
2
2. Front Panel
Power Indicator The LED lights on when power on.
HDD Indicator The LED lights on when the HDD is written.
Up To move up of the selection setting in the menu.
Channel 1 Under the live viewing mode, channel 1 display.
Channel select Single channel (1~4ch) and quad display in playback mode.
Left To move left of the selection setting in menu.
Channel 2 Under the live viewing mode, channel 2 display.
Fast Rewind Rewind speed: x2 / x4 / x8 /x16 /x32.
Down To move down of the selection setting in the menu.
Channel 3 Under the live viewing mode, channel 3 display.
Slow Forward Slow Forward speed: 1/2, 1/4, 1/8.
Right To move right of the selection setting in menu.
Channel 4 Under the live viewing mode, channel 4 display.
Fast Forward Forward speed: x2 / x4 / x8 / x16 /x32.
Enter Press the Enter button to confirm the setup or go into sub-menu.
MENU Under the live viewing mode, press MENU to enter the main menu.
Under the menu mode, press MENU to go to the upper menu.
Quad Under the live viewing mode, quad screen display.
Pause Under the playback mode, press the button to pause the playback.
Step Under the playback mode, press Step button to enter Play Frame by
Frame mode.
Manual Record Press this button to start recording in live mode.
STOP Under the playback mode, press the button to stop the operation or
go to upper menu.
Play Under the live viewing mode, press the Play button to enter the
playback mode.
3
3. Installation
1 VGA PC Monitor Output
2 Video In 4CH Video Input (BNC)
3 Video Out 1CH Video Output (BNC)
4 Audio Out 1CH Audio Output (RCA)
5 Audio In 2CH Audio Input
6 USB 2.0 Port USB Mouse / USB backup or firmware update.
7 DC12V Power Input
8 LAN RJ-45 Network Connection (for TYPE 2)
4. DVR Installation
Connect the camera video output to the DVR video input port with BNC
connectors.
The camera install coaxial cable is suggested cat 6 or above.
Power Installation
Please use the provided power cable and adaptor to connect the DVR
(AC100V~AC240V). Please refer to Installation for connecting position. The
DVR system will enter into live viewing mode when power is connected.
TYPE 2: Network
4
Please refer to Display Setup - Live Viewing Mode for more information.
DVR Network installation (for TYPE 2)
Please connect DVR to HUB or router by using RJ-45 network cable and
make sure the DVR network indicator LED is on.
(Please refer to Network Setup for further network setting information of
using static IP, PPPoE or DHCP.
5. System Operation
There are 3 kinds of DVR control method: front panel, remote control and USB
mouse.
USB Mouse Operation
1. Quick Menu: Right click the mouse button under the live viewing mode to
go for enter into Quick Menu.
2. Left click the mouse button under the main menu to go to the sub-select
menu.
3. Left click the mouse button under the select menu to go to the sub-menu.
Use the mouse to change the setting.
Remote Control Operation
Remote Control and front panel operation are the same; please refer to Front
Panel and the reference table of the button as below.
On live mode, click “Fast Forward” to switch on the GUI display.
Virtual Keyboard Operation
The text input of the virtual keyboard is as below:
CH2 display
Record
Quad display
Menu
Navigator
Fast Forward
Stop/ Remote ID Setup
Step/Pause
CH1 display
CH3 display
CH4 display
Mute
Ente
r
Fast Rewind
Play
5
Menu Operation Front Panel & Remote
Control Operation Mouse Operation
Select character from virtual keyboard [Up/Down/Left/Right] [Move Cursor]
Keyin the select character [Enter] [Left Click]
Exit the virtual keyboard [MENU] [Left Click]out of selection area
Key Description of Virtual Keyboard
Delete the previous character
Switch to text input
Enter key. Save and exit the virtual keyboard
Other Keys Character Keyin
Main Menu Operation
Setup Operation Front Panel & Remote Control USB Mouse
Select [Up/Down/Left/Right] [Moving Cursor]
Enter Select Menu [Enter] [Left Click]
Setup Operation
Setup Operation Front Panel & Remote Control USB Mouse
Select [Up/Down/Left/Right] [Moving Cursor]
Confirm Select Setting [Enter] [Left Click]
Change the Select Setting [Left/Right] [Left Click]
Main menu
Setu
p
6
6. Display Setup
There are 2 kinds of screen display mode: Live, Auto Switching .
Live Viewing Mode
The DVR will go to the live viewing mode after boot up. There are 5 different
status icon:
Setup Operation Front Panel&Remote Control USB Mouse
Channel 1~4 Single Channel
Display [CH1~4] Select one of channel
[Double click left button]
4 Channel Split Display [4 CH Split] Under single channel
[Double click left button]
Quick Menu [MENU] [Right]
Playback Mode [Play] [Right] QuickMenu
Start/Stop the Manual Record [Record] [Right] QuickMenu
Start/Stop the Auto Switching - [Right] QuickMenu
Start/Stop Mute Remote Control
[Mute] [Left] Left Click
Quick Menu
Setup Operation Front Panel & Remote Control USB Mouse
Select Item [Left/Right] [Moving Cursor]
Enter the Select Item [Up/Down] [Moving Cursor]
Confirm the Select Item [Enter] [Left Click]
Exit [MENU] [Left Click] out of selection area
●: Record
M: Motion Triggered
L: Video Loss
: Sound on/off
Main Menu
Remote Lock Search
Manual RECPIP Back Up
Info Auto Switching
7
Playback Operation
Setup Operation Front Panel & Remote
Control USB Mouse
Fast Rewind [Fast Rewind]
Fast Forward [Fast Forward]
Step Forward [StepForward]
Step/Pause [Step/Pause]
Play 1x [Play]
Stop [Stop]
Digital Zoon None Drag by Left Click
Derived Image None [Left click]
1~4 Single Channel Display [1~4 Channel] Select Channel [Double left click]
4 split Display [4 split] Under single channel
[Double left click]
Auto Switching
1. Auto switch starts from order CH1~CH4, 4 split channel.
2. Press the button again to stop the function.
7. Search
In Live mode, use Play button in the front panel/remote controller or right clicking
the mouse to switch to the Search function.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de DVR de Vacron
Vacron
Vacron VVG-MDE55 Manual de usuario
Vacron
Vacron VVH-MDE31 Guía de configuración
Vacron
Vacron VDH-DRN374 Series Manual de usuario
Vacron
Vacron VVG-MDE08B. Manual de usuario
Vacron
Vacron VVH-MD40D Manual de usuario
Vacron
Vacron VDH-GK350A Manual de usuario
Vacron
Vacron VVH-MDE304 Manual de usuario
Vacron
Vacron VVH-MDE304 Manual de usuario
Vacron
Vacron VVH-MDE58G Manual del propietario
Vacron
Vacron VDH-DXN836 Manual de usuario
Vacron
Vacron VVG-CBN29 Manual de usuario
Vacron
Vacron VVH-MDE58 Manual de usuario
Vacron
Vacron Mobile Video Recorder Manual de usuario
Vacron
Vacron Vehicle DVR System Manual de usuario
Vacron
Vacron VDH-4200B Manual de usuario
Vacron
Vacron VVH-MD82D Manual de usuario
Vacron
Vacron VDH-DXC836 Manual de usuario
Vacron
Vacron VVH-MDE308 Manual de usuario
Vacron
Vacron VDH-DXN578A Manual de usuario
Vacron
Vacron VDH-CK Series Manual de usuario
