V-TAC VT-11-R Manual de usuario

INSTALLATION INSTRUCTION

LED RECHARGEABLE LIGHT

SPECIFICATIONS

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read

these instructions carefully before starting the installing and keep this manual handy for future

reference. If you have any another query, please contact our dealer or local vendor from whom

you have purchased the product. They are trained and ready to serve you at the best.

The warranty is valid for 2 years from the date of purchase. The warranty does not apply to

damage caused by incorrect installation or abnormal wear and tear. The company gives no

warranty against damage to any surface due to incorrect removal and installation of the

product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24

Hours a day would void the warranty. This product is warranted for manufacturing defects only.

YEAR

WARRANTY *

Model VT-11-R

Was 10

Lumens 700

BeamAngle 100

PF >0.9

CRI >80

LED Chip Type SMD

IP Rang IP44

Unit Color Green+Black

On/OCycles >15000

Operaon Temperature -20°C to +45°C

Input Power AC:100-240V

Dimension 175x125mm

Batteries

1. Never attempt to open for any reason.

2. Do not store in locations where the temperature may exceed 40 °C.

3. Charge only at ambient temperatures between 4 °C and 40 °C.

4. Charge only using the charger provided with the tool.

5. When disposing of batteries, follow the instructions given in the section “Protecting the environ-

ment”.

6. Do not cause short circuits. If connection is made between the positive (+) and negative (-)

terminal directly or via accidental contact with metallic objects, the battery is short circuited and an

intense current will flow causing heat generation which may lead to casing rupture or fire.

7. Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other

polymer components may be damaged resulting in electrolyte leakage and/or internal short circuiting

leading to heat generation causing rupture or file. Moreover do not dispose of the batteries in fire,

explosion and/or intense burning may result.

8. Under extreme conditions, battery leakage may occur. When you notice liquid on the battery,

proceed as follows:

•- Carefully wipe the liquid off using a cloth. Avoid skin contact.

•- In case of skin or eye contact, follow the instructions below:

i. Immediately rinse with water. Neutralize with a mild acid such as lemon juice or vinegar.

ii. In case of eye contact, rinse abundantly with clean water for at least 10 minutes. Consult a

physician.

Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do not incinerate the battery.

Chargers

1. Use the charger provided with the tool only to charge the battery

2. Never attempt to charge non-rechargeable batteries.

3. Have defective cords replaced immediately.

4. Do not expose to water.

5. Do not open the charger.

6. Do not probe the charger.

7. The charger is intended for indoor use only.

This is not a toy; children should not permit to use it.

This is a DIY product, all electronic parts fixed already,

any intention of opening work-light or changing

work-light design is prohibitive unless a professional

electrician.

Do not attempt to replace or change or the diode lights!

If the protective glass is cracked or broken, it must be

replaced before the work light can be used again.

Safety instructions for batteries and chargers

Symbology

Safety warning for work-Light

Double insulated

Underwriters Labor atories,

Inc.

Volts Alternating Current

Amperes

1. Work light head

2. LED lamp assembly

3. Portable bracket

4. Protective cover

5. USB socket

6. Micro socket

7. LED indicator

8. ON/OFF switch with mode function

The LED work light’s portable bracket (3) is

adjustable (Max. 45°). Adjust the bracket to the

suitable position before using.

NOTE: Do not exceed to adjustable range which

avoid damaging the bracket

ADJUSTMENT THE STAND

Major Components

Assembly Instruction

Fig. 2

Fig. 1

1. Open the protective cover (4) and push the micro plug

(a) into micro socket (6).

2. Plug the adapter into a suitable mains outlet. Do not use

an extension cord.

3. When the battery is loaded, three LED indicators (7) all

illumine (Red light, yellow light and green light light up in

sequence).

NOTE: Reset the protective cover after full charge which to

avoid water enter. (Refer to Fig. 2)

NOTE: The LED indicator only will show red that means it‘s

batteries will soon run out and need to recharge.

NOTE: Don’t turn the work light on/ use USB while

charging.

• To reduce the risk of injury, user must read and understand instruction manual.

• Always make sure the work light is off and complete cool before attempting to clean it.

CHARGING THE WORK LIGHT

The USB DC 5V 1A output socket (8) can use for

all kinds of device which can be charged by USB

cord (b), such as mobile phone, MP3/MP4,

Bluetooth headset etc.

NOTE: The USB output will stop output

automatically if the total working current of the

total connected device exceed the limit.

SWITCH ON/OFF AND LUMEN ADJUSTMENT (See Fig. 2)

The work light is equipped with an ON/OFF switch with mode function (8) locate on the back side of the

work light.

The LED work light’s brightness is adjustable.

With press ON/OFF switch (8): 1st press: 100% brightness; 2nd press: 50% brightness; 3rd press: SOS

flashing; 4th press: OFF.

Discharging time: About 3 hours for 100% brightness;

About 5 hours for 40% brightness;

USB OUTPUT

OPERATION

WARNING!

Fig. 5

Fig. 4

Otros manuales de Equipo de iluminación de V-TAC

V-TAC

V-TAC VT-5167 Manual de usuario

V-TAC

V-TAC VT-035 Manual de usuario

V-TAC

V-TAC VT-3528-60 Manual de usuario

V-TAC

V-TAC Neon Flex VT-554 Manual de usuario

V-TAC

V-TAC GU10 Milky Cover Manual de usuario

V-TAC

V-TAC VT-768 Manual de usuario

V-TAC

V-TAC VT-16010 Manual de usuario

V-TAC

V-TAC VT-559 Manual de usuario

V-TAC

V-TAC VT-522-S Manual de usuario

V-TAC

V-TAC VT-8006 Manual de usuario

V-TAC

V-TAC VT-521 Manual de usuario

V-TAC

V-TAC VT-6072 Manual de usuario

V-TAC

V-TAC VT-10-R Manual de usuario

V-TAC

V-TAC VT-511S Manual de usuario

V-TAC

V-TAC VT-7571 Manual de usuario

V-TAC

V-TAC VT-8061 Manual de usuario

V-TAC

V-TAC VT-781 RD Manual de usuario

V-TAC

V-TAC VT-20201ST Manual de usuario

V-TAC

V-TAC VT-7573 Manual de usuario

V-TAC

V-TAC VT-8082 Manual de usuario

V-TAC

V-TAC VT-524-S Manual de usuario

V-TAC

V-TAC VT-1607 Manual de usuario

V-TAC

V-TAC SMART LIGHT VT-5050 Manual de usuario

V-TAC

V-TAC VT-13 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario