Unit UT70D Manual de usuario

Table ofContents

Title Page

Overview

Unpacking Inspection

Safety Information

Rules For Safe Operation

International Electrical Symbols

The Meter Structure

Rotary Switch

Functional Buttons

Display Symbols

Measurement Ranges

Selecting a Measurement Range

Manual Ranging and Autoranging

Measurement Operation

AC Voltage Measurement

DC Voltage Measurement

DC Milivolt Measurement

Measuring Resistance / Conductance,

Capacitance and Continuity

Testing Diodes

DC or AC Current Measurement

MAX/MIN Recording Mode

PEAK MAX/MIN Mode

Operation of Hold Mode

Operation of Auto Hold Mode

The Use of Relative Value and Relative

Percentage Value Mode

Turning on the Display Backlight

Analogue Bar Graph Display

Sleep Mode

General Specifications

Frequency & Duty Cycle Measurement

Accuracy Specifications

A. AC Voltage

B. DC Voltage

C. Continuity, Resistance &

Conductance Test

D. Capacitance

E. Diodes Test

F. DC Current

G. AC Current

H. Frequency & Duty Cycle

Maintenance

A. General Service

B. Testing the Fuses

C. Replacing the Battery

D. Replacing the Fuses

RS232C Serial Port

A. RS232C Port Cable

B. Setting of RS232C Serial Ports

C. System Requirements for Installing the

UT70D Interface Program

This Operating Manual covers information on safety and

cautions. Please read the relevant information carefully

and observe all the Warnings and Notes strictly.

Warning

To avoid electric shock or personal injury, read the

"Safety Information" and "Rules for Safe Operation"

carefully before using the Meter.

Your Multimeter is an intelligent digital one, a precise

instrument with a resolution of 80,000 counts and up-to

-date automatic computer calibrating function. High

resolution A/D converter and micro-controller data

processing technique is adopted in the Meter, featured

with intelligence, high precision and multi-functions. The

Meter can be widely used in laboratory field service,

domestic and other applications. All the functions and

ranges have full overload protection.

In addition to the conventional measuring functions, it is

equipped with a RS232C standard serial port for easy

connection with computer to realize macro recording and

monitoring and capture of transient dynamic data,

displaying change of waveform during the measurement,

providing data and evidence to engineering technicians

for scientific research. This is also a highly applied digital

multimeter of good performance with display backlight.

Open the package case and take out the Meter. Check

the following items carefully to see any missing or

damaged part:

Item Description Qty

1 English Operating Manual 1 piece

2 Test Lead 1 pair

3 Test Clip 1 piece

9V Battery (NEDA 1604,6F22

or 006P) (installed)

5 RS232C Interface Cable 1 piece

CD-ROM (Installation Guide &

Computer Interface Software)

7 Holster 1 piece

8 Tilt Stand 1 piece

1 piece

In the event you find any missing or damage, please

contact your dealer immediately.

Safety Information

CAT. II: Local level, appliance, PORTABLE EQUIPMENT

etc., with smaller transient voltage overvoltages than

CAT. III

CAT. III: Distribution level, fixed installation, with smaller

transient overvoltages than CAT. IV

CAT IV: Primary supply level, overhead lines,

cablesystems etc.

Use the Meter only as specified in this operating manual,

otherwise the protection provided by the Meter may be

impaired.

In this manual, a Warning identifies conditions and

actions that pose hazards to the user, or may damage

the Meter or the equipment under test.

A Note identifies the information that user should pay

attention on.

International electrical symbols used on the Meter and

in this Operating Manual are explained on page 8

CE Version: The Meter complies with the standards

IEC61010-1:in pollution degree 2, overvoltage category

CAT III 1000V, CAT IV 600V and double insulation .

UL Version: The Meter complies with the standards UL61010B-1,

in pollution degree 2, overvoltage category CAT II 1000V

and double insulation.

Rules For Safe Operation(1)

Warning

To avoid possible electric shock or personal injury,

and to avoid possible damage to the Meter or to the

equipment under test, adhere to the following rules:

Before using the Meter inspect the case. Do not

use the Meter if it is damaged or the case (or part

of the case) is removed. Look for cracks or missing

plastic. Pay attention to the insulation around the

connectors.

Inspect the test leads for damaged insulation or

exposed metal. Check the test leads for continuity.

Replace damaged test leads with identical model

number or electrical specifications before using the

Meter.

Do not apply more than the rated voltage, as marked

on the Meter, between the terminals or between

any terminal and grounding.

The rotary switch should be placed in the right

position and no any changeover of range shall be

made during measurement is conducted to prevent

damage of the Meter.

Never working at an effective voltage over 60V in

DC or 30V rms in AC for there is danger of electric

shock.

Use the proper terminals, function, and range for

your measurements.

Do not use or store the Meter in an environment of

high temperature, humidity, explosive, inflammable

and strong magnetic field. The performance of the

Meter may deteriorate after dampened.

When using the test leads, keep your fingers behind

the finger guards.

Disconnect circuit power and discharge all high-

voltage capacitors before testing resistance,

continuity, diodes, current or capacitance.

Before measuring current, check the Meter's fuses

and turn off power to the circuit before connecting

the Meter to the circuit.

Replace the battery as soon as the battery indicator

appears. With a low battery, the Meter might

produce false readings that can lead to electric

shock and personal injury.

Remove test leads and RS232C interface cable

from the Meter and turn the Meter power off before

opening the Meter case.

When servicing the Meter, use only the same model

number or identical electrical specifications

replacement parts.

The internal circuit of the Meter shall not be altered

at will to avoid damage of the Meter and any accident.

Soft cloth and mild detergent should be used to

clean the surface of the Meter when servicing. No

abrasive and solvent should be used to prevent the

surface of the Meter from corrosion, damage and

accident.

The Meter is suitable for indoor use.

Turn the Meter off when it is not in use and take

out the battery when not using for a long time.

Constantly check the battery as it may leak when

it has been using for some time, replace the battery

as soon as leaking appears. A leaking battery will

damage the Meter.

Rules For Safe Operation(2)

The Meter Structure (see figure 1)

Rotary Switch

Below table indicated for information about the rotary

switch positions.

Continuity measurement.

Capacitance measurement.

measurement.

AC or DC current measurement range

from 0.1mA to 10.000A.

AC or DC current measurement range

from 0.001mA to 800.00mA.

Functional Buttons(1)

Below table indicated for information about the functional

button operations.

Function

Turn the continuity buzzer on and

off in the Resistance measurement

mode.

Continuity

Test

Power-Up

Option

Press while turning on the

Meter to disable the beeper

of pressing any button.

LCD

Symbol

Measure

Peak Min

Max

To toggle between 100ms

response time and 1ms response

time under REC mode except

resistance and capacitance range.

100ms

MAX

MIN

100ms

MAX

MIN

AVG

MAX/

MIN

REC

Mode

Starts recording of maximum

and minimum values. Steps the

display through the sequence of

present, high(MAX), low(MIN)

and average(AVG) readings at

any mode except at conductance

mode. In 1ms response time,

it steps through only MAX and

MIN reading.

Power-Up

Option

To select 1 second high accuracy

response time, press and hold

down MAX/MIN while turning

the rotary switch to any function

setting.

RANGE

Manual

range

/auto-range

options

l Press RANGE to toggle

between manual ranging

and auto ranging mode at

any rotary switch position.

Press RANGE to step

through the ranges available

for the selected function.

Press RANGE while turning on

the power to enter 80,000 counts

resolution except at capacitance

measurement.

Others

Tabla de contenidos

Manuales populares de Multímetro de otras marcas

Agilent Technologies

Agilent Technologies 34420A Manual de usuario

Fluke

Fluke 83 Manual de usuario

Hameg

Hameg HM 8012 Manual de usuario

Mastech

Mastech MY70 Manual de usuario

Steren

Steren MUL-300 Manual de usuario

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manual de usuario

PeakTech

PeakTech 4000 Manual de uso y cuidado

YOKOGAWA

YOKOGAWA 90050B Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manual de usuario

Fluke

Fluke 8846A Manual de operación y mantenimiento

Tempo Communications

Tempo Communications MM200 Manual de usuario

Elenco Electronics

Elenco Electronics CM-1555 Manual de usuario

Mastech

Mastech MS8238C Manual de usuario

SDAR

SDAR 830A, 830B, 830D, 830C Manual de usuario

RS PRO

RS PRO RS-9519BT Manual de usuario

BGS technic

BGS technic 8890 Manual de usuario

Amprobe

Amprobe Hexagon 60 Manual de usuario