Uniden Guardian App Cam Solo Manual de usuario
Uniden
App Cam Solo
Battery Powered Camera
OWNER’S MANUAL
For more exciting new products please visit our website:
Australia: www.uniden.com.au
2
IMPORTANT SAFETY INSTRUCTIONS
Damages caused by non-compliance with this Owner’s Manual will void the
warranty! We will not assume any liability for damages to items or persons
caused by improper handling or non-compliance with the safety notices! Any
warranty claim will be null and void in such cases.
•Do not drop, puncture or disassemble the camera. DO NOT expose the
camera to excessive water or moisture.
•Never tug on the power cords. Use the plug to unplug it from the outlet.
•Do not expose the camera to high temperature or leave it in direct
sunlight. Doing so, may damage the camera or cause temporary camera
malfunction.
•Use the devices with care. Avoid pressing hard on the camera body.
•For your own safety, avoid using the camera or power off the camera when
there is a storm or lightning.
•Disconnect the power adaptor during long periods between usage.
•Use only the accessories and power adaptors supplied by Uniden.
Ensure the signal reception is acceptable between the camera(s) and the WiFi
router. If necessary, reduce the distance between them to improve overall
system performance. As local internet environments may vary, your device
may indicate that the camera is disconnected or may display a black screen. If
this occurs, refresh the app.
Item Requirement/Recommendation
Internet Bandwidth 1 Mbps upload/download speed
Network Requirement WiFi or 4G (optimize download speed)
Memory Card microSD, CLASS10, up to 32GB
Device Processor 1.5GHz dual core processor or equivalent
WIRELESS DEVICES OPERATING RANGE
3
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ........................................................ 2
OVERVIEW ..................................................................................................... 4
WHAT’S IN THE BOX? ................................................................................... 5
GETTING TO KNOW YOUR CAMERA ........................................................... 6
INSTALLING THE BATTERY ......................................................................... 7
INSTALL UNIDEN SOLO APP...................................................................... 7
DEVICE MANAGEMENT............................................................................ 10
PLACING THE CAMERA ............................................................................. 17
QUICK ACCESS ICONS ............................................................................... 19
LIVEVIEW/PLAYBACK ................................................................................ 22
LIVEVIEW ................................................................................................... 22
PLAYBACK ................................................................................................. 24
ADVANCED SETTING .................................................................................. 25
PIR SENSOR SETTING ............................................................................. 25
E-MAIL SETTINGS ..................................................................................... 28
VIDEO QUALITY & ON SCREEN DISPLAY SETTING ............................. 30
DATE AND TIME SETTING ....................................................................... 33
IMPORTANT INFORMATION ..................................................................... 34
SD CARD ................................................................................................... 34
BATTERY ................................................................................................... 35
SPECIFICATION ........................................................................................... 37
WARRANTY .................................................................................................. 38
4
The App Cam Solo is a full HD, weatherproof smart camera. Completely
wirefree, the app cam is battery powered with advanced power-saving
technology featuring up to 180 days standby time. With quick and easy
installation, the camera can be placed anywhere inside or outside of the
home.
Offering a 130-degree viewing angle, which provides a greater field of vision,
the Guardian App Cam Solo can be fitted to any flat surface with an easy-to
install magnetic base. Also included is an optional screw base for those more
easy-to-reach areas, such as the front door. Cameras can be twisted to an
angle to suit any situation and easily moved around the home without the
need to re-wire or place near a power source, providing complete flexibility
when setting up viewing angles.
The App Cam Solo connects directly to the local Wi-Fi network and features
motion detection recording directly to an SD card. Users can access the App
Cam Solo with a Smart phone or tablet via the free to download Uniden Solo
app, which also provides users remote access to the cameras to check-in from
anywhere in the world. With optional app push notifications when motion or
sound is detected, users can be reassured the home is safe while at work or
on holiday.
Users can connect as many cameras as they wish in areas such as, the
driveway, garage, front and back entrances and upstairs. The camera can
even be used to check on pets or babies while in other areas of the house.
The camera features PIR motion sensor, which detects movement and will
send notifications to the user via the app. Users have the ability to two-way
talk in real time through the camera, for easy communication with visitors
including couriers, while also acting as a deterrent to unwanted guests.
The flexible, innovative Uniden App Cam Solo camera provides peace of mind
at home or while away.
OVERVIEW
5
WHAT’S IN THE BOX?
Twin Pack includes 2 single packs of AppCam Solo.
Quad Pack includes 4 single packs of AppCam Solo.
CR123A
AppCam Solo Camera
x1
Reset Needle
x1
Flat Mount
x1
Screw Mount
x1
CR 123A Batteries
x1
Screws (in pack)
x1
Stick
x1
If any item is missing or damaged, contact your place of purchase
immediately.
Never use damaged products!
Need Help? Get answers at our website:
www.uniden.com.au for Australian model
6
GETTING TO KNOW YOUR CAMERA
Micro SD Card Slot
Reset Button
Daylight Sensor
Lens
Status LED
Built-in Mic
Speaker
Flat Mount
Working Mode
App Cam Solo has two working modes:
Standby Status: The camera is in the power-saving mode; there is no live
view or motion recording.
Working Status : The camera is running at full capacity. It enters the working
status when someone is accessing the camera via Uniden Solo App or the
PIR motion sensor detects a movement.
LED Status
Color Mea
Colour Connection Status
Red WiFi Connection failed Blinking: Standby
On: Working
Blue WiFi Connection is successful Blinking: Standby
On: Working
Note: LED will flash every 20 seconds when the camera is in Standby status.
Appearance
Built-in PIR Motion Sensor
7
INSTALLING THE BATTERY
CR123A
-
+
Step 1 Step 2 Step 2
Please use the stick to
press the white button,
and then rotate to sepa-
rate the backing casing
from the camera.
Insert four batteries
into the battery slot.
Close the back cas-
ing. Please press
both end of the cas-
ing to make it close
rmly for good weath-
erproof performance.
Insert the Batteries into the Camera
8
Install Uniden Solo App
System Requirement
Uniden Solo App will run on both the Android and iOS devices.
System Requirement:
iOS devices: iOS 8.0 or higher.
Android devices: Android 3.0 or higher.
Install the App
1. Search “Uniden Solo” in App Store or Google Play, download and install the
app.
2. After successfully installed it, tap the icon to launch the Uniden Solo App.
INSTALLING THE UNIDEN SOLO APP
9
User Interface
: More Option , tap this icon to show more configuration icons.
: Help , tap to read the tips regarding camera usage and installation.
: Share the QR code, tap this icon to get the QR code/UID of the camera.
: Edit Device , tap this icon to edit the login parameters of the camera.
: Delete , tap this icon to delete the camera from the device list.
: Battery Status , tap this icon to enter the battery usage page.
/ : Push Notification, tap this icon to enable or disable Push Notification.
/ : PIR Motion Sensor, tap the button to enable or disable the PIR.
: Wi-Fi Settings, tap this icon to enter the WiFi settings page.
: Device Settings , tap this icon to enter the setup menu of the camera.
: Play , tap this icon to enter the live view page to view the video stream.
: Settings , tap this icon to enter the settings page of the App.
10
Device Management
This part will introduce how to add new device, modify the device information
and modify device login password etc.
Add New Device
You can add the camera by scanning QR code (on camera’s back) or
manually entering camera UID (below QR code).
1. Tap to start.
2. Option 1: Scan the QR Code
Scan the QR code on the back of camera to continue.
Note: In the dark environment, please turn on the flashlight on your phone by
tapping .
Tabla de contenidos
Otros manuales de Cámara de seguridad de Uniden
Uniden
Uniden G101 Manual de usuario
Uniden
Uniden UDRC57HD Manual de usuario
Uniden
Uniden UDR444 Manual de usuario
Uniden
Uniden Guardian GC45 Manual de usuario
Uniden
Uniden ULC58 Manual de usuario
Uniden
Uniden Guardian GC45 Manual de servicio
Uniden
Uniden UWS1100 Manual de usuario
Uniden
Uniden LightCam 40HD Manual de usuario
Uniden
Uniden App Cam Solo Pro Series Manual de usuario
Uniden
Uniden App Cam Home Manual de usuario
Uniden
Uniden APPCAM23 Manual de servicio
Uniden
Uniden UDSC15 Manual de usuario
Uniden
Uniden UDR444 Manual de usuario
Uniden
Uniden App Cam Solo 4G PT Manual de usuario
Uniden
Uniden AppCam 50HD Manual de usuario
Uniden
Uniden APPCAM23A Manual de usuario
Uniden
Uniden APPCAM PAN/TILT Manual de usuario
Uniden
Uniden UDRC58HD Manual de usuario
Uniden
Uniden UDR444 Manual de usuario
Uniden
Uniden App Cam Floodlight Manual de usuario
