Uniden DCX300 Series Manual de usuario

6/*%&/

$03%-&44

5&-&1)0/&4

%$94FSJFT

Welcome

Congratulations on your purchase of the Uniden DCX300

accessory handset and charging cradle. You can place this fully

featured cordless handset anywhere your home has AC power.

Note: Illustrations in this manual are used for explanation purposes.

Some illustrations may differ from the actual unit.

Accessibility

Uniden provides a customer service hotline for accessibility

questions. If you have a disability and need customer service

assistance or if you have any questions about how Uniden's

products can accommodate persons with disabilities, please call

the accessibility voice/TTY line: 1-800-874-9314.

Our customer care hours as well as accessibility information

can be found on our website, www.uniden.com, under the

"Accessibility" link. If your call is received outside of our business

hours, you can leave us a message and we will call you back.

Important!

The DCX300 accessory handset will not operate until it is

registered to a Uniden main base. This manual describes how

to set up your new handset; for more detailed instructions on

operating your new handset, please refer to the manual supplied

with your base.

Terminology Used in this Manual

Accessory

Handset

A handset that works with an expandable phone base.

Accessory handsets must be registered to a base.

Base The main part of the phone that connects to your phone

line, and lets you make and receive calls.

Charging

cradle

A cradle that charges an accessory handset. It connects to

power but not to a phone line.

Standby

The handset is not in use. No line has been activated.

(It doesn’t matter whether the handset is in the cradle.)

No dial tone is present.

Station Any registered handset or the base.

Talk A dial tone has been enabled, so you can dial and carry on

a conversation with an outside party.

Uniden®is a registered trademark of Uniden America Corporation.

Compatible Bases

This handset is compatible with Uniden's 1.9 GHz DECT6.0

Expandable phone system: the DECT2000 and DECT3000

series.

Please visit our website at www.uniden.com for the most up-to-

date list of compatible bases.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any

items are missing or damaged, contact our Customer Service

Hotline. See the back cover page for contact information.

• Cordless Handset • Belt Clip

• Printed Material

• Charging cradle with AC Adapter (model # PS-0007: Input

120V AC, 60 Hz; Output 9V DC, 210 mA)

• Rechargeable NiMH Battery Pack (model # BT-1011)

Installing the Battery

Use only the Uniden BT-1011 rechargeable battery pack supplied

with your cordless telephone.

Installing the Belt Clip

Insert the tabs on the sides of the belt clip into

the holes on either side of the handset. Press

the belt clip down until it clicks into place. (Tug

on the clip to make sure it’s secure.)

To remove the belt clip, gently pull the tabs out

of the holes, then slide the belt clip off of the

handset.

Battery

pack

Battery

cover

Handset

Locate the battery

pack, battery cover

and the handset.

Push the battery pack connector

in firmly. (You should hear it click

into place.) Gently tug on the

battery wires to make sure the

connection is secure.

Place the cover over the

battery compartment and

slide it up into place.

Line up the red and black

wires on the battery pack

connector with the sticker in

the handset’s battery

compartment.

Battery

pack

Battery

cover

Handset

Locate the battery

pack, battery cover

and the handset.

Push the battery pack connector

in firmly. (You should hear it click

into place.) Gently tug on the

battery wires to make sure the

connection is secure.

Place the cover over the

battery compartment and

slide it up into place.

Line up the red and black

wires on the battery pack

connector with the sticker in

the handset’s battery

compartment.

Charging the Accessory Handset

The handset is powered by a rechargeable battery pack that

automatically recharges when the handset is placed in the

charging cradle.

Use only the Uniden PS-0007 AC adapter with the charging

cradle.

What if the charge LED

doesn’t light up?

Reseat the handset; make sure the

contacts on the bottom of the handset

are lined up with the contacts in the

cradle.

Check the AC adapter connection.

Make sure you are not using an outlet

that’s controlled by a wall switch.

Connect the AC adapter to a

standard 120V AC wall outlet.

Place the cord

through the molded

wiring channel.

Place the handset in the charging

cradle with the display facing forward.

Charge your handset at least 15 to 20 hours

before using your new handset for the first time.

Make sure that the

charge LED

illuminates when

the handset is

seated.

What if the charge LED

doesn’t light up?

Reseat the handset; make sure the

contacts on the bottom of the handset

are lined up with the contacts in the

cradle.

Check the AC adapter connection.

Make sure you are not using an outlet

that’s controlled by a wall switch.

Connect the AC adapter to a

standard 120V AC wall outlet.

Place the cord

through the molded

wiring channel.

Place the handset in the charging

cradle with the display facing forward.

Charge your handset at least 15 to 20 hours

before using your new handset for the first time.

Make sure that the

charge LED

illuminates when

the handset is

seated.

Installing the Optional Headset

Your phone may be used with an optional

headset. To use a headset, insert the

headset plug into the headset jack.

Headsets may be purchased by calling

the Uniden Parts Department. See the

back cover page for contact information.

Registering the Handset

You must register the handset to the base before you can use it.

Only one handset can be registered at a time. (If an accessory

handset has ever been registered to a base, you must reset the

handset before you can register it to a new base.)

To register to a DECT3080 base:

Place the accessory handset in the base. While the handset is

registering, HANDSET REGISTERING appears in the LCD.

When REGISTRATION COMPLETE is displayed, the handset

has been registered to the base.

To register to a DECT2060 or DECT2080 base:

Disconnect the base AC adapter.

Press and hold [nd hs] while you reconnect the adapter.

Keep pressing [nd hs] until the charge LED starts to blink.

On the handset, press and hold [#] until the handset beeps

and displays HANDSET REGISTERING.

When the handset nishes registering, it shows

REGISTRATION COMPLETE in the display.

To register to a DECT2085 or DECT2088 base:

With the phone in standby, press [Menu/Select] on the

base.

Press []to move the cursor to REGISTER HANDSET

and then press [Menu/Select]. HANDSET REGISTERING

appears.

On the handset, press and hold [#] until the handset beeps

and displays HANDSET REGISTERING.

When the handset nishes registering, it shows

REGISTRATION COMPLETE in the display.

What if the display shows REGISTRATION FAILED?

Repeat the process starting with step 1.

What if the display shows REGISTRATION FAILED?

Repeat the process starting with step 1.

What if the display shows REGISTRATION FAILED?

Repeat the process starting with step 1.

What if the display shows REGISTRATION FAILED?

Repeat the process starting with step 1.

Resetting the Handset Without the Base

If the original base this handset was registered to is not

available for some reason (for example, it is lost or somehow

incapacitated), you can still reset the handset and use it with

another base.

Press and hold []and [#] for at least ve seconds, until the

SYSTEM RESET menu appears.

Press []to move the cursor to BASE UNAVAILABLE and

then press [Select/menu].

Press []to move the cursor to the base which you want

to de-register from, and then press [Select/menu]. BASE

UNAVAILABLE appears.

Press []to move the cursor to YES, and then press

[Select/menu]. You hear a conrmation tone, and the

handset deletes its own link to the base without trying to

contact the base.

Now you are ready to register the handset to the new base.

Resetting the Handset

If you want to register the handset to a different base or replace

a handset with another one, you must rst clear the registration

information from the base and the handset.

Press and hold []and [#] for at least ve seconds, until the

SYSTEM RESET menu appears.

Select the DEREGISTER HS

submenu by pressing [Select/

menu]. WHICH HANDSET?

appears in the display.

Use []or []to select the

handset ID to be de-registered

from the list, and then press [Select/menu]. DEREGISTER

HS appears.

Press []to move the cursor to YES, and then press

[Select/menu]. You will hear a conrmation tone.

Using the Interface

Parts of the Handset

Headset jack cover

Belt clip hole

Speakerphone speaker and ringer

Battery compartment

new message LED

Earpiece

Display (LCD)

[Int’com/clear] key

(intercom/clear)

[ ] key (phonebook/left)

[ /flash] key (talk/flash)

[ /tone] key

[ /pause] key

(redial/pause)

[ /mute] key

(messages/mute)

[ ] key (up)

[Select/menu] key

Twelve-key dial pad

[#] key

Microphone

Charging contacts

[ ] key (caller ID/right)

[ ] key (end call)

[ ] key (down)

Headset jack cover

Belt clip hole

Speakerphone speaker and ringer

Battery compartment

new message LED

Earpiece

Display (LCD)

[Int’com/clear] key

(intercom/clear)

[ ] key (phonebook/left)

[ /flash] key (talk/flash)

[ /tone] key

[ /pause] key

(redial/pause)

[ /mute] key

(messages/mute)

[ ] key (up)

[Select/menu] key

Twelve-key dial pad

[#] key

Microphone

Charging contacts

[ ] key (caller ID/right)

[ ] key (end call)

[ ] key (down)

Reading the Display

Day of the week

and time

Handset ID and banner

Call duration

In standby

During a call

570#/

*CPFUGV

The ringer off icon indicates that the ringer is

turned off.

The voice mail icon appears when you have

messages waiting at your service provider

voice mail box.

The speaker icon appears when the speaker

phone is in use.

The CID icon appears when you have new

Caller ID records.

The mute icon appears while the microphone

is muted.

The privacy icon appears when the Privacy

Mode is turned on.

The battery icon indicates the handset

battery status: full, medium, low, and empty.

Tabla de contenidos

Otros manuales de Auricular de Uniden

Uniden

Uniden DCX320 Manual de usuario

Uniden

Uniden DSS3405 Manual de usuario

Uniden

Uniden DSS 7905 Manual de usuario

Uniden

Uniden MULTIRANGE DRX332 Manual de usuario

Uniden

Uniden WDECT 2355 Manual de usuario

Uniden

Uniden D1484 series Manual de usuario

Uniden

Uniden TRUc46 Manual de usuario

Uniden

Uniden DCX100 - DCX 100 Cordless Extension Handset Manual de usuario

Uniden

Uniden DCX291 Manual de lista de piezas

Uniden

Uniden DCX170BT Manual de servicio

Uniden

Uniden DECT 1705 Manual de usuario

Uniden

Uniden DSS 2405 Manual de usuario

Uniden

Uniden DWX337 Manual de usuario

Uniden

Uniden WDECT3315 Manual de usuario

Uniden

Uniden TCX 805 Manual de usuario

Uniden

Uniden DCX320 Manual de servicio

Uniden

Uniden DCX220 Manual de servicio

Uniden

Uniden DCX170BT Manual de usuario

Uniden

Uniden DCX170 Manual de usuario

Uniden

Uniden DECT 1715+1 Manual de usuario

Uniden

Uniden DCX309 Manual de usuario

Uniden

Uniden DCX220 Manual de usuario

Uniden

Uniden WXI3077 Manual de usuario

Uniden

Uniden DCX160 Manual de usuario

Manuales populares de Auricular de otras marcas

Swissvoice

Swissvoice ePure HD Manual de usuario

Philips

Philips TD6736/BH051P Manual de usuario

ASCOM

ASCOM I62 - Manual de usuario

LG-Ericsson

LG-Ericsson LIP-9010 Manual de usuario

GE 1583 Manual de usuario

iiNet

iiNet Handset Manual de usuario

ASCOM

ASCOM 9p23 Manual de usuario

AT&T

AT&T DLP70110 Manual de usuario

AirCell

AirCell ST 3100 Manual de usuario

Eaton

Eaton HHIR-LCD-PROG Instrucciones de montaje

Mitel

Mitel 112 Manual de usuario

SBC

SBC SBC-381H Manual de usuario

Mitel

Mitel 5602 Manual de usuario

ASCOM

ASCOM d81 Messenger Instrucciones de instalación

SpectraLink

SpectraLink 7522 Manual de usuario

Avaya

Avaya L100 Series Cómo utilizar

ooma

ooma HD2 Handset Manual de usuario

Yealink

Yealink IPW56 Manual de usuario