Ubiquiti UBB Manual de usuario

UBB (Qty. 2) Ball Joint Mount (Qty. 2) Lock Ring (Qty. 2)

Metal Strap (Qty. 2) Gigabit PoE (48V, 0.32A) with

Mounting Bracket (Qty. 2) Power Cord (Qty. 2)

Package Contents

System Requirements

One of the following:

UniFi Cloud Key (1.0.5 or newer) or UniFi Dream Machine (1.0.1 or newer)

Linux, Mac OS X, or Microsoft Windows 7/8/10

Java Runtime Environment 1.6 (1.8 or newer recommended)

UniFi Controller software v5.12.x (or newer), available at:

ui.com/download/uniﬁ

UniFi Network App (iOS or Android™) or Web Browser (Google Chrome preferred)

Installation Requirements

Pole-mounting: 8 mm socket wrench or screwdriver

Wall-mounting: wall fastener (not included)

The device needs to have clear line of sight to the sky for proper GPS operation.

Shielded Category 5 (or above) cabling with drain wire should be used for all wired

Ethernet connections and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from harmful outdoor environments

and destructive ESD events with industrial-grade, shielded Ethernet cable from

UBB Quick Start Guide

Ubiquiti. For more details, visit

ui.com/toughcable

Surge protection should be used for all outdoor installations. We recommend that

you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the device and

the other at the entry point to the building. The ETH-SP-G2 will absorb power surges

and safely discharge them into the ground.

Hardware Overview

UBB Quick Start Guide

System LED

Reset Button

Ethernet Port

Flashing White Initializing.

White Factory defaults, waiting for integration.

Alternating White/Blue Device is busy; do not touch or unplug it. This usually

indicates that a process such as a ﬁrmware upgrade is

taking place.

Blue Successfully integrated into a network and working

properly.

Flashing

This is used to locate a device.

When you click Locate in the UniFi Network Controller

software, the LED will ﬂash blue. The software will

also display the location of the device on the map.

Resets to factory defaults. The device should be running after bootup is complete.

Press and hold the Reset button for about 10 seconds until the LED starts ﬂashing

and then becomes solidly lit. After a few seconds, the LED will turn oﬀ, and the

device will automatically reboot.

Note:

The UBB radios are pre-paired. If a link is lost due to conﬁguration

changes, you can reset both UBB radios to re-establish the link.

Local UBB radio (source LAN)

This Gigabit Ethernet port is used to connect the

power and should be connected to the LAN and DHCP server.

Remote UBB radio (bridged LAN)

This Gigabit Ethernet port is used to connect the

power and should be connected to the LAN. It will receive its IP address from the

UBB Quick Start Guide

DHCP server via the wireless link to the local UBB radio.

UBB Quick Start Guide

Hardware Installation

For each UBB radio, go to the appropriate mounting instructions: Pole Mounting or

“Wall Mounting”

Pole-Mounting

UBB Quick Start Guide

Wall Mounting

The device must be mounted directly to a wood stud or other structurally stable

surface to avoid damage to the mounting hole when you adjust the aim.

Optional Accessory

To enhance stability, you can use the NanoBeam® Wall Mount Kit, model NBE-WMK

(sold separately).

Note:

Center screw included. Two optional screws (not included) provide

additional stability.

Installation Instructions

UBB Quick Start Guide



UBB Quick Start Guide

Fastener (not included)

NanoBeam Wall Mount Kit

Aiming

Visually aim the UBB radios at each other:

UBB Quick Start Guide

Connecting Power

For each UBB radio:

UBB Quick Start Guide

Otros manuales para UBB

Otros manuales de Punto de acceso inalámbrico de Ubiquiti

Ubiquiti

Ubiquiti UniFi Dream Machine Manual de usuario

Ubiquiti

Ubiquiti BulletM2-HP Manual de usuario

Ubiquiti

Ubiquiti PBE-M5-400 Manual de usuario

Ubiquiti

Ubiquiti NBE-M5-16 Manual de usuario

Ubiquiti

Ubiquiti M900 Manual de usuario

Ubiquiti

Ubiquiti NanoStatonM Series Manual de usuario

Ubiquiti

Ubiquiti UAP-AC-IW Manual de usuario

Ubiquiti

Ubiquiti UniFi nanoHD AP Manual de usuario

Ubiquiti

Ubiquiti UniFi AP AC Lite Manual de usuario

Ubiquiti

Ubiquiti airFiber AF-11 Manual de usuario

Ubiquiti

Ubiquiti QCA9994 Guía de aplicación

Ubiquiti

Ubiquiti AirOS B2 Manual de usuario

Ubiquiti

Ubiquiti UniFi Wifi BaseStationXG Manual de usuario

Ubiquiti

Ubiquiti BulletM2-HP Manual de usuario

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-16-120 Manual de usuario

Ubiquiti

Ubiquiti Bullet AC-IP67 Manual de usuario

Ubiquiti

Ubiquiti IsoStation M5 Manual de usuario

Ubiquiti

Ubiquiti NBE--2AC--13 Manual de usuario

Ubiquiti

Ubiquiti UAP Manual de usuario

Ubiquiti

Ubiquiti UniFi UAP-AC-LITE Manual de usuario

Ubiquiti

Ubiquiti LiteBeam M5 LBE-M5-23 Manual de usuario

Ubiquiti

Ubiquiti UAP-PRO Manual de usuario

Ubiquiti

Ubiquiti UniFi WiFi BaseStation XG Manual de usuario

Ubiquiti

Ubiquiti airFiber AF-11 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario

EnGenius

EnGenius EAP350 Manual de usuario